Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.3 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 128 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 85 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (17792)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
£20.15
Important compatibility info
| Placement on Vehicle | Front |
| Length | 1307 mm |
| Function | Cable Pull, parking brake |
| Weight | 0.445 kg |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.55 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 59 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 130 mm |
| Additional Information 2 | without ball bearing |
| Inner diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.141 kg |
| Width | 25.4 mm |
| Number of Teeth | 127 |
| Belts | with rounded tooth profile |
| Type | Timing Belt |
| Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.480 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (32617)
- 1x Febi Rolling Bearing, suspension strut support mount (12471)
£20.15
Important compatibility info
| Weight | 0.035 kg |
| Length | 99.1 mm |
| Notches / Holes Number | 3 |
| Type | Exhaust Valve |
| Function | Exhaust Valve |
| for OE number | 030 109 611 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.365 kg |
| Placement on Vehicle | Lower Front Axle, Rear |
| Length | 50 mm |
| Material | Rubber/Metal |
| Outer diameter | 57.5 mm |
| Inner diameter | 12.5 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Fulfils ECE norm | R10, R4 |
| Mounting Type | Bolted |
| Type | Licence Plate Light |
| Height | 80 mm |
| Width | 53 mm |
| Inspection Tag | SAE, EMC |
| Port / Connector type | PRS |
| Weight | 0.084 kg |
| Light Design | LED |
| Protection Type (IP Code) | IP67 |
| Cable Length | 500 mm |
| Depth | 59 mm |
| Voltage from | 12 V |
| Voltage to | 24 V |
| Function | Licence Plate Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket Set, cylinder head cover |
| Weight | 0.054 kg |
| for OE number | 11 12 7 807 017 |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Material | ACM (Polyacrylate) |
| Length | 453 mm |
| Width | 250 mm |
| Weight | 0.155 kg |
| Thickness | 2.4 mm |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.240 kg |
| Length | 1400 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.540 kg |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Height | 103 mm |
| Outer diameter | 95 mm |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Function | Cap, oil filter housing |
| Weight | 0.133 kg |
| Extra Description | febi Plus |
| Additional Information 2 | with seal ring |
| Type | Cap, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.239 kg |
| Length | 1914 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Material | Plastic |
| Additional Information 2 | without lid |
| Weight | 0.6401 kg |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| for OE number | 8A0 121 403 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.075 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2. 4 |
| Cable Length | 504 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.134 kg |
| Number of Connectors / Ports | 2 |
| Pump Type | Dual Pump |
| Function | Washer Fluid Pump, headlight cleaning |
| Additional Information 2 | with seal ring |
| Type | Washer Fluid Pump, headlight cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.8 kg |
| Placement on Vehicle | Front Axle Left |
| Thickness | 78 mm |
| Paired article numbers | 43237 |
| Function | Tie Rod End |
| Spanner Size | 17 |
| Width | 40 mm |
| Length | 224 mm |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Weight | 0.051 kg |
| Type | Spring Seat |
| Function | Spring Seat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Rod/Strut | Coupling Rod |
| Weight | 0.3 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 200 mm |
| Material | Steel |
| Spanner Size | 19, 13, 12 |
| Additional Information 2 | with washers, with nut |
| External Thread Size | M12 x 1,25, M8 x 1,25 |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Height | 100 mm |
| Additional Information | with gaskets/seals |
| Material | Paper |
| Outer diameter | 74 mm |
| Inner diameter | 18 mm |
| Filter type | Filter Insert |
| Type | Fuel filter |
| Function | Fuel filter |
| Weight | 0.15 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Weight | 1.075 kg |
| Placement on Vehicle | Rear Axle |
| Length | 94.69 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with brake caliper screws, with anti-squeak plate, with fastening material |
| Type | Brake Pad Set, disc brake |
| Width | 51 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 320 mm |
| Paired article numbers | 32039 |
| Function | Inner Tie Rod |
| Weight | 0.67 kg |
| External Thread Size | M14 x 1,5, M16 x 1 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Weight | 0.480 kg |
| Additional Information 2 | without ball bearing |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Weight | 1.066 kg |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Inner diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Placement on Vehicle | Left Rear |
| Weight | 0.520 kg |
| Paired article numbers | 178231 |
| Length | 1786 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 0.026 kg |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Weight | 0.0195 kg |
| Housing Colour | black |
| Length | 68 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Type | Stop Light Switch |
| Function | Stop Light Switch |
| Screw length below head | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.17
Important compatibility info
| Weight | 0.58 kg |
| Placement on Vehicle | Lower Right |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Type | Roller Guide, sliding door |
| Paired article numbers | 175680 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.17
Important compatibility info
| Weight | 0.018 kg |
| Placement on Vehicle | Front Axle |
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.17
Important compatibility info
| Thickness/Strength 1 | 15 mm |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Rear Axle |
| Length | 103.8 mm |
| Width | 44.9 mm. 47 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
| Type | Brake Pad Set, disc brake |
| Weight | 0.942 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.17
Important compatibility info
| for OE number | 272 052 13 16 |
| Weight | 0.175 kg |
| Engine Management | Timing Chain |
| Type | Guide, timing chain |
| Function | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.18
Important compatibility info
| Chemical Properties | Elastic |
| Weight | 0.083 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Number of Ribs | 6 |
| Length | 860 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.18
Important compatibility info
| Material | Aluminium |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 17.8 mm |
| Weight | 0.232 kg |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.18
Important compatibility info
| Weight | 0.210 kg |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (37477)
- 2x Febi Protective Cap/Bellow, shock absorber (180463)
£20.18
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.112 kg |
| Type | Sensor, engine speed |
| Function | Sensor, engine speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 03K 906 051 |
| Weight | 0.027 kg |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 0.525 kg |
| Function | Bush, spring eye |
| Type | Bush, spring eye |
| Inner diameter | 19 mm |
| Material | Rubber/Metal |
| Length | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Weight | 1.45 kg |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.145 kg |
| Material | Aluminium |
| Piston Diameter | 25.4 mm |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Function | Oil Jet, piston underside cooling |
| Type | Oil Jet, piston underside cooling |
| Weight | 0.025 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Function | Repair Kit, pressure relief valve (air compressor) |
| Weight | 0.133 kg |
| Type | Repair Kit, pressure relief valve (air compressor) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Mounting points diameter | 18 mm |
| Housing length | 327.5 mm |
| Weight | 0.335 kg |
| Placement on Vehicle | both sides |
| Length | 537 mm |
| Housing Diameter | 19 mm |
| Eject Force | 670 N |
| Stroke | 180 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.20
Important compatibility info
| Placement on Vehicle | Intake Side, Exhaust Side |
| Weight | 0.068 kg |
| Outer diameter | 12 mm |
| Thickness | 34.7 mm |
| Operating Mode | Hydraulic |
| Type | Tappet |
| Function | Tappet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.20
Important compatibility info
| Weight | 0.217 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 30 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Length | 117 mm |
| Inner diameter 2 | 82 mm |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172855)
- 1x Febi Molybdenum Grease (02582)
£20.20
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.204 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (22142)
- 2x Febi Rubber Buffer, suspension (23410)
£20.20
Important compatibility info
| Number of Ribs | 6 |
| Length | 1231 mm |
| Weight | 0.107 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Weight | 0.35 kg |
| Type | Mounting, support frame/subframe |
| Placement on Vehicle | both sides, Centre, Lower |
| Length | 57 mm |
| Outer diameter | 72.5 mm |
| Function | Mounting, support frame/subframe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Weight | 0.06 kg |
| Air Supply Hoses/Pipes | from valve (crankcase ventilation) to oil filter |
| Function | Hose, cylinder head cover ventilation |
| Extra Description | febi Plus |
| for OE number | 06F 103 235 |
| Additional Information 2 | with quick couplers |
| Type | Hose, cylinder head cover ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Material | ACM (Polyacrylate) |
| for OE number | 654 016 22 00 |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
| Weight | 0.042 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023