Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.075 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2. 4 |
| Cable Length | 504 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket Set, cylinder head cover |
| Weight | 0.054 kg |
| for OE number | 11 12 7 807 017 |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.59 kg |
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1594 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.175 kg |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 96 mm |
| Material | Rubber |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 72 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (18779)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (38764)
- 1x Febi Molybdenum Grease (02582)
£20.15
Important compatibility info
| Weight | 0.480 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (32617)
- 1x Febi Rolling Bearing, suspension strut support mount (12471)
£20.15
Important compatibility info
| Additional Information | with counter nut |
| Weight | 0.597 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 256 mm |
| Function | Inner Tie Rod |
| External Thread Size | M16 x 1, M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Material | Rubber/Metal |
| Thickness | 80 mm |
| Function | Bushing, axle beam |
| Weight | 0.52 kg |
| Type | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Fulfils ECE norm | R4, R10 |
| Mounting Type | Bolted |
| Type | Licence Plate Light |
| Height | 80 mm |
| Width | 53 mm |
| Inspection Tag | SAE, EMC |
| Port / Connector type | PRS |
| Weight | 0.084 kg |
| Light Design | LED |
| Protection Type (IP Code) | IP67 |
| Cable Length | 500 mm |
| Depth | 59 mm |
| Voltage from | 12 V |
| Voltage to | 24 V |
| Function | Licence Plate Light |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.41 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Length | 174 mm |
| Width | 158 mm |
| Material | Rubber/Metal |
| Outer diameter | 66 mm. 109 mm |
| Inner diameter | 14 mm |
| Weight | 1.1 kg |
| Paired article numbers | 18734 |
| Placement on Vehicle | Front Axle Left |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Internal Thread Size | M8 x 1,25 |
| Height | 52 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Filter type | Screen Filter |
| Function | Hydraulic Filter Kit, automatic transmission |
| Weight | 0.255 kg |
| Width | 126 mm |
| Length | 244 mm |
| Height | 59 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.3 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 128 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 85 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (17792)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
£20.15
Important compatibility info
| Additional Information | with quick coupling |
| Weight | 0.170 kg |
| Hose Length | 800 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from expansion tank to distributor and cylinder head |
| Function | Radiator Hose |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 1.054 kg |
| Placement on Vehicle | Front Axle |
| Length | 141.4 mm |
| Width | 44.6 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 1.11 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Outer diameter | 80 mm |
| Inner diameter | 42 mm |
| Additional Information | with axle nut |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
| Type | Wheel Bearing Kit |
| Width | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Mounting points diameter | 18 mm |
| Housing length | 364.5 mm |
| Function | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Stroke | 303 mm |
| Eject Force | 230 N |
| Housing Diameter | 18 mm |
| Length | 685 mm |
| Placement on Vehicle | both sides |
| Weight | 0.394 kg |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.339 kg |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Eject Force | 500 N |
| Housing length | 312 mm |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.28 kg |
| Housing Diameter | 18 mm |
| Length | 585 mm |
| Placement on Vehicle | both sides |
| Stroke | 246 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Weight | 0.070 kg |
| Cable Length | 1005 mm |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 0.026 kg |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Weight | 0.480 kg |
| Additional Information 2 | without ball bearing |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Height | 100 mm |
| Additional Information | with gaskets/seals |
| Material | Paper |
| Outer diameter | 74 mm |
| Inner diameter | 18 mm |
| Filter type | Filter Insert |
| Type | Fuel filter |
| Function | Fuel filter |
| Weight | 0.15 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Weight | 0.23 kg |
| Width | 55.3 mm |
| Material | Plastic |
| Outer diameter | 60 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 75.2 mm |
| Inner diameter | 32.1 mm |
| Weight | 0.483 kg |
| Type | Bush, driver cab suspension |
| Function | Bush, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Thickness | 70 mm |
| Inner diameter | 20 mm |
| Weight | 0.578 kg |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Weight | 0.051 kg |
| Type | Spring Seat |
| Function | Spring Seat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.16
Important compatibility info
| Weight | 0.58 kg |
| Placement on Vehicle | Lower Right |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Type | Roller Guide, sliding door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.17
Important compatibility info
| Weight | 0.0195 kg |
| Housing Colour | black |
| Length | 68 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Type | Stop Light Switch |
| Function | Stop Light Switch |
| Screw length below head | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.17
Important compatibility info
| Weight | 0.210 kg |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (37477)
- 2x Febi Protective Cap/Bellow, shock absorber (180463)
£20.18
Important compatibility info
| Weight | 0.560 kg |
| Additional Information 2 | with screw |
| Material | Metal |
| Outer diameter | 74 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 46 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.18
Important compatibility info
| Chemical Properties | Elastic |
| Weight | 0.083 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Number of Ribs | 6 |
| Length | 860 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.18
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.145 kg |
| Material | Aluminium |
| Piston Diameter | 25.4 mm |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Additional Information 2 | with screw |
| Width | 22 mm |
| Material | Plastic |
| Outer diameter | 56 mm |
| Spanner Size | 15 |
| External Thread Size | M10 x 1,5 |
| Weight | 0.263 kg |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Function | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Function | Repair Kit, pressure relief valve (air compressor) |
| Weight | 0.133 kg |
| Type | Repair Kit, pressure relief valve (air compressor) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 03K 906 051 |
| Weight | 0.027 kg |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Function | Oil Jet, piston underside cooling |
| Type | Oil Jet, piston underside cooling |
| Weight | 0.025 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Weight | 1.45 kg |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Placement on Vehicle | Intake Side, Exhaust Side |
| Weight | 0.068 kg |
| Outer diameter | 12 mm |
| Thickness | 34.7 mm |
| Operating Mode | Hydraulic |
| Type | Tappet |
| Function | Tappet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.20
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.204 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (22142)
- 2x Febi Rubber Buffer, suspension (23410)
£20.20
Important compatibility info
| Mounting points diameter | 18 mm |
| Housing length | 327.5 mm |
| Weight | 0.335 kg |
| Placement on Vehicle | both sides |
| Length | 537 mm |
| Housing Diameter | 19 mm |
| Eject Force | 670 N |
| Stroke | 180 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.20
Important compatibility info
| Weight | 0.217 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 30 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Length | 117 mm |
| Inner diameter 2 | 82 mm |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172855)
- 1x Febi Molybdenum Grease (02582)
£20.20
Important compatibility info
| Weight | 0.35 kg |
| Type | Mounting, support frame/subframe |
| Placement on Vehicle | both sides, Centre, Lower |
| Length | 57 mm |
| Outer diameter | 72.5 mm |
| Function | Mounting, support frame/subframe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Material | ACM (Polyacrylate) |
| for OE number | 654 016 22 00 |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
| Weight | 0.042 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 284 mm |
| Diameter | 1 mm |
| Material | Steel |
| Paired article numbers | 184018 |
| Rod/Strut | Coupling Rod |
| Weight | 0.654 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5, M12 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Diameter | 1 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Right |
| Length | 284 mm |
| External Thread Size | M10 x 1,5, M12 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Weight | 0.654 kg |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 184019 |
| Spanner Size | 19 |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Weight | 0.25 kg |
| Height | 249 mm |
| Outer diameter | 88 mm |
| Inner diameter | 46 mm. 18 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Internal Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 169 mm |
| Additional Information | with counter nut |
| Spanner Size | 25 |
| Paired article numbers | 180829 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Weight | 0.92 kg |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Weight | 0.06 kg |
| Air Supply Hoses/Pipes | from valve (crankcase ventilation) to oil filter |
| Function | Hose, cylinder head cover ventilation |
| Extra Description | febi Plus |
| for OE number | 06F 103 235 |
| Additional Information 2 | with quick couplers |
| Type | Hose, cylinder head cover ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Weight | 0.45 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
| for OE number | 1844.42 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.22
Important compatibility info
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Weight | 0.190 kg |
| Function | Timing Belt |
| Belts | with rounded tooth profile |
| Number of Teeth | 101 |
| Width | 20 mm |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.22
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023