Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.380 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 98 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 86 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38818)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (38765)
- 1x Febi Molybdenum Grease (02582)
£21.58
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 02145 |
| Function | Tie Rod |
| Weight | 0.976 kg |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.58
Important compatibility info
| Type | Air Filter |
| Filter type | Filter Insert |
| Placement on Vehicle | Front, Right |
| Length | 198 mm |
| Height | 103 mm |
| Width | 194 mm |
| Inner diameter | 127 mm |
| Function | Air Filter |
| Weight | 0.364 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.58
Important compatibility info
| Placement on Vehicle | Lower Right |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Weight | 0.5 kg |
| Type | Roller Guide, sliding door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.58
Important compatibility info
| Outer diameter | 106 mm |
| Height | 132 mm |
| Filter type | In-Line Filter, with filter heating |
| Type | Fuel filter |
| Pipe Diameter | 10 mm |
| Weight | 0.350 kg |
| Function | Fuel filter |
| Housing material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.59
Important compatibility info
| Weight | 0.503 kg |
| Material | Rubber/Metal |
| Thickness | 90 mm |
| Paired article numbers | 170538 |
| Function | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.59
Important compatibility info
| Placement on Vehicle | Intake Side |
| Weight | 0.037 kg |
| Type | Finger Follower, engine timing |
| Function | Finger Follower, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.59
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Weight | 0.501 kg |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.60
Important compatibility info
| Weight | 0.834 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing, with fastening material |
| for OE number | 03 44 519 S2 |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (08176)
- 1x Febi Rolling Bearing, suspension strut support mount (17180)
- 1x Febi Rubber Buffer, suspension (03099)
£21.60
Important compatibility info
| Function | Lock Cylinder, ignition lock |
| Type | Lock Cylinder, ignition lock |
| Weight | 0.174 kg |
| Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.60
Important compatibility info
| Weight | 0.400 kg |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 82 mm |
| Thickness | 110 mm |
| Inner diameter | 26 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.60
Important compatibility info
| Thickness | 128 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Weight | 0.560 kg |
| Outer diameter | 54 mm. 50 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Lower Front Axle, Centre |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.61
Important compatibility info
| Weight | 0.7 kg |
| Placement on Vehicle | Rear Axle |
| Length | 110.4 mm |
| Width | 37.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 13.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.61
Important compatibility info
| Weight | 0.245 kg |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.61
Important compatibility info
| Additional Information | without coolant level sensor |
| Weight | 0.51 kg |
| Material | PP (Polypropylene) |
| Colour | White |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | 13 04 241 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.61
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 20.3 mm |
| Weight | 0.490 kg |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.230 kg |
| Length | 1487 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Outer diameter | 127 mm |
| Weight | 0.411 kg |
| Type | Protection Lid, wheel hub |
| Height | 50 mm |
| Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 1.165 kg |
| Internal Thread Size | M32 x 1,5 |
| Height | 263 mm |
| Outer diameter | 107 mm |
| Inner diameter | 93 mm |
| Filter type | Spin-on Filter |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.3 kg |
| Placement on Vehicle | both sides |
| Length | 750 mm |
| Housing Diameter | 18 mm |
| Eject Force | 300 N |
| Stroke | 325 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 407.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.361 kg |
| Placement on Vehicle | both sides |
| Length | 600 mm |
| Stroke | 250 mm |
| Eject Force | 330 N |
| Housing Diameter | 19 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Housing length | 323.5 mm |
| Mounting points diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.673 kg |
| Function | Repair Kit, reversing lever |
| Type | Repair Kit, reversing lever |
| for OE number | 211 498 171 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Steering Shaft (01539)
- 2x Febi Bush, steering arm shaft (01641)
- 1x Febi Seal, steering arm (01637)
- 1x Febi Seal, steering arm (01638)
- 1x Febi Repair Kit, reversing lever (01643)
- 1x Febi Washer (01642)
- 1x Febi Repair Kit, reversing lever (01644)
- 1x Febi Repair Kit, reversing lever (01645)
- 1x Febi Spring Washer (01646)
- 1x Febi Repair Kit, reversing lever (01635)
- 1x Febi Screw (01634)
£21.62
Important compatibility info
| Weight | 0.050 kg |
| Function | Gasket, cylinder head cover |
| Material | Rubber |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Paired article numbers | 180225 |
| Type | Brake Hose |
| Weight | 0.232 kg |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Length | 535 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Additional Information 2 | with bolts/screws, with sensor |
| Function | Coolant Flange |
| Type | Coolant Flange |
| Weight | 0.166 kg |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1212 mm |
| Type | V-Ribbed Belt |
| Alternator type | for starter generator |
| Weight | 0.112 kg |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.085 kg |
| Resistance | 1300 Ohm |
| Cable Length | 920 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Length | 1015 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.341 kg |
| Housing length | 390.5 mm |
| Function | Gas Spring, bonnet |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Eject Force | 350 N |
| Stroke | 308 mm |
| Length | 730 mm |
| Placement on Vehicle | Right |
| Housing Diameter | 18 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Paired article numbers | 180234 |
| Weight | 0.187 kg |
| Type | Brake Hose |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Additional Information | with holder |
| Placement on Vehicle | Front Axle Right |
| Length | 693 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Function | Cable Pull, clutch control |
| Outer Length | 971 mm |
| Inner Length | 602 mm |
| Weight | 0.262 kg |
| Type | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 1.016 kg |
| Function | Bolt, release fork |
| Type | Bolt, release fork |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
£21.62
Important compatibility info
| Opening Temperature | 82 °C |
| Function | Thermostat, coolant |
| Weight | 0.178 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (11848)
- 1x Febi Seal, thermostat (11834)
£21.62
Important compatibility info
| Weight | 0.030 kg |
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Outer diameter | 70 mm |
| Thickness | 8 mm |
| Inner diameter | 55 mm |
| Function | Shaft Seal, injector pump |
| Type | Shaft Seal, injector pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.437 kg |
| Diameter | 400 mm. 430 mm |
| Type | Repair Kit, clutch release bearing |
| Function | Repair Kit, clutch release bearing |
| Replaces | 44160 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.470 kg |
| Placement on Vehicle | Front |
| Length | 157 mm |
| Width | 88 mm |
| Thickness | 60 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.3 kg |
| Function | Oil Cooler, engine oil |
| Additional Information | with gasket/seal |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Number of Ribs | 10 |
| Length | 1635 mm |
| Weight | 0.227 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 700 mm |
| Housing Diameter | 22 mm |
| Mounting points diameter | 18 mm |
| Eject Force | 660 N |
| Stroke | 305 mm |
| Housing length | 373.5 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.556 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| for OE number | 1 755 951 S1 |
| Weight | 0.7 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Outer diameter | 65 mm |
| Inner diameter | 55 mm |
| Function | Radiator Hose |
| Extra Description | ProKit |
| Additional Information 2 | with clamps |
| Type | Radiator Hose |
| Hose Length | 574 mm |
| Wall Thickness | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (101070)
- 2x Febi Hose Clamp (48355)
£21.62
Important compatibility info
| Weight | 0.092 kg |
| Length | 57 mm |
| Spanner Size | 19 |
| Opening Pressure | 14.3 bar |
| Function | Pressure Relief Valve |
| External Thread Size | M16 x 1,5 |
| Type | Pressure Relief Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 693 mm |
| Paired article numbers | 180235 |
| Weight | 0.170 kg |
| Type | Brake Hose |
| Function | Brake Hose |
| Additional Information | with holder |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Additional Information | with lock nut |
| Weight | 0.92 kg |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 211 mm |
| Paired article numbers | 43547 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 1.290 kg |
| Additional Information 2 | with fastening material |
| Placement on Vehicle | Front Axle |
| Length | 128.7 mm |
| Width | 46.4 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.46 kg |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 171546 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.63
Important compatibility info
| Cooling Hose | from engine to engine cooler |
| Inner diameter | 36 mm |
| Function | Radiator Hose |
| Placement on Vehicle | Lower Right |
| Weight | 0.285 kg |
| Additional Information | with quick coupling |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.63
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.927 kg |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.63
Important compatibility info
| Weight | 0.246 kg |
| Placement on Vehicle | both sides |
| Length | 505 mm |
| Housing Diameter | 19 mm |
| Eject Force | 770 N |
| Stroke | 157 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.63
Important compatibility info
| Extra Description | ProKit |
| Weight | 0.239 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 170 mm |
| Material | Plastic |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.63
Important compatibility info
| Paired article numbers | 171537 |
| Weight | 0.383 kg |
| Placement on Vehicle | Front Axle Right |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.63
Important compatibility info
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 0.72 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.63
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023