Important compatibility info
Weight | 1.165 kg |
Internal Thread Size | M32 x 1,5 |
Height | 263 mm |
Outer diameter | 107 mm |
Inner diameter | 93 mm |
Filter type | Spin-on Filter |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.437 kg |
Diameter | 400 mm. 430 mm |
Type | Repair Kit, clutch release bearing |
Function | Repair Kit, clutch release bearing |
Replaces | 44160 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.085 kg |
Resistance | 1300 Ohm |
Cable Length | 920 mm |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
Length | 1015 mm |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.230 kg |
Length | 1487 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 10 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, clutch control |
Outer Length | 971 mm |
Inner Length | 602 mm |
Weight | 0.262 kg |
Type | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | V-Ribbed Belt |
Tensile Cord Material | Aramid |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1212 mm |
Type | V-Ribbed Belt |
Alternator type | for starter generator |
Weight | 0.112 kg |
Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.006 kg |
Function | Bulb / Bulb, front fog light |
Fulfils ECE norm | R37 |
Type | Bulb / Bulb, front fog light |
Rated Power | 70 W |
Bulb Type | H1, longer service life (vibration-proof), longer service life |
Voltage | 24 V |
Base design light bulb | P14.5s |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Lock System | with key |
Function | Lock Cylinder, ignition lock |
Type | Lock Cylinder, ignition lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.31 kg |
Height | 109 mm |
Outer diameter | 97 mm |
Filter type | In-Line Filter |
Type | Fuel filter |
Function | Fuel filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 180225 |
Type | Brake Hose |
Weight | 0.232 kg |
Function | Brake Hose |
Internal Thread Size | M10 x 1 |
Length | 535 mm |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.341 kg |
Housing length | 390.5 mm |
Function | Gas Spring, bonnet |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Eject Force | 350 N |
Stroke | 308 mm |
Length | 730 mm |
Placement on Vehicle | Right |
Housing Diameter | 18 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 82 °C |
Function | Thermostat, coolant |
Weight | 0.178 kg |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (11848)
- 1x Febi Seal, thermostat (11834)
Important compatibility info
Weight | 1.016 kg |
Function | Bolt, release fork |
Type | Bolt, release fork |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
Important compatibility info
Weight | 0.673 kg |
Function | Repair Kit, reversing lever |
Type | Repair Kit, reversing lever |
for OE number | 211 498 171 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Steering Shaft (01539)
- 2x Febi Bush, steering arm shaft (01641)
- 1x Febi Seal, steering arm (01637)
- 1x Febi Seal, steering arm (01638)
- 1x Febi Repair Kit, reversing lever (01643)
- 1x Febi Washer (01642)
- 1x Febi Repair Kit, reversing lever (01644)
- 1x Febi Repair Kit, reversing lever (01645)
- 1x Febi Spring Washer (01646)
- 1x Febi Repair Kit, reversing lever (01635)
- 1x Febi Screw (01634)
Important compatibility info
Weight | 0.46 kg |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 171546 |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.246 kg |
Placement on Vehicle | both sides |
Length | 505 mm |
Housing Diameter | 19 mm |
Eject Force | 770 N |
Stroke | 157 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 0.72 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 171537 |
Weight | 0.383 kg |
Placement on Vehicle | Front Axle Right |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.458 kg |
Length | 253 mm |
Height | 40 mm |
Width | 134 mm |
Filter type | Activated Carbon Filter |
Function | Filter Set, cabin air |
Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Weight | 0.239 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 170 mm |
Material | Plastic |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with bolts/screws |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023