Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter | 85 mm |
| Height | 190 mm |
| Inner diameter | 73 mm |
| Function | Air Filter |
| Filter type | Filter Insert |
| Weight | 0.262 kg |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.58
Important compatibility info
| Weight | 0.380 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 98 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 86 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38818)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (38765)
- 1x Febi Molybdenum Grease (02582)
£21.58
Important compatibility info
| Weight | 0.149 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 54 |
| Function | Chain, oil pump drive |
| Timing Chain Size | G53HP, G53HR |
| Additional Information 2 | Requires special tools for mounting |
| Type | Chain, oil pump drive |
| Replaces | 33893 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.58
Important compatibility info
| Tensile Cord Material | Aramid |
| Placement on Vehicle | engine sided |
| Length | 1157 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Weight | 0.099 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.58
Important compatibility info
| Placement on Vehicle | Intake Side |
| Weight | 0.037 kg |
| Type | Finger Follower, engine timing |
| Function | Finger Follower, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.59
Important compatibility info
| Weight | 0.503 kg |
| Material | Rubber/Metal |
| Thickness | 90 mm |
| Paired article numbers | 170538 |
| Function | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.59
Important compatibility info
| Outer diameter | 106 mm |
| Height | 132 mm |
| Filter type | In-Line Filter, with filter heating |
| Type | Fuel filter |
| Pipe Diameter | 10 mm |
| Weight | 0.350 kg |
| Function | Fuel filter |
| Housing material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.59
Important compatibility info
| Function | Lock Cylinder, ignition lock |
| Type | Lock Cylinder, ignition lock |
| Weight | 0.174 kg |
| Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.60
Important compatibility info
| Weight | 0.400 kg |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 82 mm |
| Thickness | 110 mm |
| Inner diameter | 26 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.60
Important compatibility info
| Weight | 0.834 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing, with fastening material |
| for OE number | 03 44 519 S2 |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (08176)
- 1x Febi Rolling Bearing, suspension strut support mount (17180)
- 1x Febi Rubber Buffer, suspension (03099)
£21.60
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Weight | 0.501 kg |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.60
Important compatibility info
| Thickness | 128 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Weight | 0.560 kg |
| Outer diameter | 54 mm. 50 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Lower Front Axle, Centre |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.61
Important compatibility info
| Weight | 0.7 kg |
| Placement on Vehicle | Rear Axle |
| Length | 110.4 mm |
| Width | 37.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 13.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.61
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| for OE number | 33 50 6 773 629 S1 |
| Weight | 0.192 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.61
Important compatibility info
| Weight | 0.245 kg |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.61
Important compatibility info
| Additional Information | without coolant level sensor |
| Weight | 0.51 kg |
| Material | PP (Polypropylene) |
| Colour | White |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | 13 04 241 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.61
Important compatibility info
| Weight | 0.006 kg |
| Function | Bulb / Bulb, front fog light |
| Fulfils ECE norm | R37 |
| Type | Bulb / Bulb, front fog light |
| Rated Power | 70 W |
| Bulb Type | H1, longer service life (vibration-proof), longer service life |
| Voltage | 24 V |
| Base design light bulb | P14.5s |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 1.016 kg |
| Function | Bolt, release fork |
| Type | Bolt, release fork |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
£21.62
Important compatibility info
| Outer diameter | 127 mm |
| Weight | 0.411 kg |
| Type | Protection Lid, wheel hub |
| Height | 50 mm |
| Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.030 kg |
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Outer diameter | 70 mm |
| Thickness | 8 mm |
| Inner diameter | 55 mm |
| Function | Shaft Seal, injector pump |
| Type | Shaft Seal, injector pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023