Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.2 kg |
| Colour | light green |
| Type | Equalising reservoir, hydraulic oil (power steering) |
| Function | Equalising reservoir, hydraulic oil (power steering) |
| Extra Description | febi Plus |
| Additional Information 2 | with cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.82
Important compatibility info
| Weight | 1.91 kg |
| Placement on Vehicle | Front Axle |
| Length | 119.3 mm |
| Width | 78 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.82
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Weight | 0.01 kg |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.82
Important compatibility info
| Function | Tappet |
| Operating Mode | Hydraulic |
| Weight | 0.057 kg |
| Placement on Vehicle | Intake Side, Exhaust Side |
| Type | Tappet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tappet (22344)
- 1x Febi Finger Follower, engine timing (26938)
- 1x Febi Thrust Piece, intake/exhaust valve (29906)
£21.82
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 207 mm |
| Cone Size 2 | 20 mm |
| Cone Size 1 | 16 mm |
| External Thread Size | M14 x 1,5 |
| Spanner Size | 21 |
| Paired article numbers | 183113 |
| Weight | 0.922 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.83
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket, cylinder head cover |
| Weight | 0.119 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.83
Important compatibility info
| Weight | 0.361 kg |
| Function | V-Ribbed Belt |
| Length | 2347 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.83
Important compatibility info
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left |
| Length | 207 mm |
| Cone Size 2 | 20 mm |
| Function | Tie Rod End |
| Spanner Size | 21 |
| Paired article numbers | 183111 |
| Weight | 0.922 kg |
| Type | Tie Rod End |
| Cone Size 1 | 16 mm |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.83
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 448 mm |
| Paired article numbers | 37591 |
| Function | Tie Rod |
| Weight | 1.158 kg |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (37594)
- 1x Febi Inner Tie Rod (26045)
£21.83
Important compatibility info
| Weight | 1.158 kg |
| Length | 448 mm |
| Paired article numbers | 37592 |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (37593)
- 1x Febi Inner Tie Rod (26045)
£21.83
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 260 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Diameter | 1 mm |
| Material | Steel |
| Outer diameter | 10 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 0.414 kg |
| Thread Length | 26.5 mm |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.84
Important compatibility info
| Weight | 2.0 kg |
| Placement on Vehicle | Front Axle |
| Length | 148.6 mm |
| Width | 57.4 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.2 mm |
| Function | Brake Pad Set, disc brake |
| Replaces | 16119 |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.84
Important compatibility info
| Weight | 1.360 kg |
| Placement on Vehicle | Front Axle |
| Length | 116.9 mm |
| Width | 59.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.84
Important compatibility info
| Weight | 0.396 kg |
| Placement on Vehicle | Left |
| Length | 674 mm |
| Paired article numbers | 24719 |
| Housing Diameter | 18 mm |
| Eject Force | 300 N |
| Stroke | 293 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 362.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.84
Important compatibility info
| Additional Information 2 | with anti-squeak plate, with piston clip |
| Placement on Vehicle | Rear Axle |
| Length | 88.8 mm |
| Width | 47.4 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.6 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Weight | 0.870 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.84
Important compatibility info
| Weight | 0.07 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Material | Steel |
| Outer diameter | 157 mm |
| Inner diameter | 154 mm |
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.85
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 70 |
| Timing Chain Size | Z46 |
| Function | Chain, oil pump drive |
| Weight | 0.4 kg |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.85
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Cable Length | 350 mm |
| Type | Sensor, crankshaft pulse |
| Weight | 0.045 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.85
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Inner diameter | 12 mm |
| Function | Suspension Strut Support Mount |
| Weight | 0.43 kg |
| Type | Suspension Strut Support Mount |
| Height | 50 mm |
| Outer diameter | 117 mm. 121 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.85
Important compatibility info
| Additional Information | with gasket/seal |
| Outer diameter | 54 mm |
| Weight | 0.121 kg |
| Opening Temperature | 89 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (179755)
- 1x Febi Seal, thermostat (172462)
£21.85
Important compatibility info
| Width | 24 mm |
| Outer diameter | 62 mm |
| Function | Pilot Bearing, clutch |
| Inner diameter | 25 mm |
| Type | Pilot Bearing, clutch |
| Weight | 0.312 kg |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.85
Important compatibility info
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Weight | 0.131 kg |
| Paired article numbers | 176572 |
| Placement on Vehicle | Left |
| Type | Washer Fluid Jet, headlight cleaning |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.85
Important compatibility info
| Type | Valve, crankcase ventilation |
| Extra Description | febi Plus |
| Function | Valve, crankcase ventilation |
| Weight | 0.046 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.86
Important compatibility info
| Weight | 0.413 kg |
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Internal Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.86
Important compatibility info
| Weight | 0.42 kg |
| Placement on Vehicle | Front Axle |
| External Thread Size | M8 x 1,25 |
| Outer diameter | 128 mm |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Height | 61 mm |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (106699)
£21.86
Important compatibility info
| Weight | 0.067 kg |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 172515 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1210 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.86
Important compatibility info
| Resistance | 1200 Ohm |
| Cable Length | 1480 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 1570 mm |
| Number of Connectors / Ports | 2 |
| Weight | 0.112 kg |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.86
Important compatibility info
| Weight | 0.075 kg |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 172610 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1440 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.86
Important compatibility info
| Weight | 0.880 kg |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 37629 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with fastening/mounting material |
| Steering | with tie rod end |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (19604)
- 1x Febi Inner Tie Rod (32874)
£21.87
Important compatibility info
| Additional Information 2 | with seal ring |
| Outer diameter | 89 mm |
| Height | 211 mm |
| Inner diameter | 41 mm |
| Filter type | Filter Insert |
| Weight | 0.266 kg |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.87
Important compatibility info
| Weight | 2.015 kg |
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm |
| Width | 68 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.8 mm. 19.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.87
Important compatibility info
| Function | Exhaust Valve |
| Length | 161 mm |
| Type | Exhaust Valve |
| Notches / Holes Number | 3 |
| Weight | 0.130 kg |
| Valve head diameter | 38 mm |
| Valve stem diameter | 8.965 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.87
Important compatibility info
| Weight | 0.880 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 37630 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with fastening/mounting material |
| Steering | with tie rod end |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (19605)
- 1x Febi Inner Tie Rod (32874)
£21.87
Important compatibility info
| Weight | 2.38 kg |
| Height | 164 mm |
| Outer diameter | 136 mm |
| Inner diameter | 111 mm |
| Function | Air Dryer Cartridge, compressed-air system |
| Internal Thread Size | M41 x 2 |
| Type | Air Dryer Cartridge, compressed-air system |
| Additional Information 2 | with seal ring, with integrated oil separator |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.88
Important compatibility info
| Function | Hose, cylinder head cover ventilation |
| Type | Hose, cylinder head cover ventilation |
| Inner diameter 1 | 19.5 mm |
| Weight | 0.113 kg |
| Material | Plastic |
| Extra Description | febi Plus |
| Outer diameter 1 | 26.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.88
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 118.1 mm |
| Width | 47.4 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Weight | 1.080 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.88
Important compatibility info
| Weight | 1.219 kg |
| Placement on Vehicle | Front Axle |
| Length | 141.63 mm |
| Width | 50.6 mm. 50.8 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.7 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.88
Important compatibility info
| Additional Information 2 | with seal ring |
| Colour | Black |
| Number of Connectors / Ports | 3 |
| Weight | 0.02 kg |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.88
Important compatibility info
| Weight | 0.465 kg |
| Internal Thread Size | M24 x 1,5 |
| Placement on Vehicle | both sides |
| Length | 560 mm |
| Outer diameter | 23.8 mm |
| Inner diameter | 12.6 mm |
| Function | Pressure Hose, air compressor |
| Type | Pressure Hose, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.88
Important compatibility info
| Seal Material | Paper |
| Function | Hydraulic Filter Kit, automatic transmission |
| Filter type | Screen Filter |
| Additional Information 2 | with oil sump gasket |
| Weight | 0.40 kg |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (100398)
- 1x Febi Gasket, automatic transmission oil sump (31994)
£21.88
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.356 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.88
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1502 mm |
| Number of Ribs | 6 |
| Weight | 0.144 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.88
Important compatibility info
| Outer diameter | 60 mm |
| Inner diameter | 10 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.26 kg |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 26.5 mm |
| Mounting points diameter | 10.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.89
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.368 kg |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (30423)
- 2x Febi Protective Cap/Bellow, shock absorber (182957)
£21.89
Important compatibility info
| Function | Hose, crankcase ventilation |
| Colour | Black |
| Material | Plastic |
| Weight | 0.034 kg |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
| for OE number | 11 15 7 503 523 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.89
Important compatibility info
| Weight | 0.164 kg |
| Placement on Vehicle | transmission sided |
| Height | 13 mm |
| Material | MVQ (silicone rubber) |
| Outer diameter | 139 mm |
| Inner diameter | 104 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.89
Important compatibility info
| DIN / ISO | 7867 |
| Length | 2315 mm |
| Weight | 0.24 kg |
| Function | V-Ribbed Belt |
| Number of Ribs | 6 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.89
Important compatibility info
| Weight | 1.56 kg |
| Placement on Vehicle | Front Axle |
| Length | 352 mm |
| Function | Suspension Spring |
| Wire Diameter | 11.8 mm |
| Type | Suspension Spring |
| Outer diameter | 149 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.89
Important compatibility info
| Housing length | 113 mm |
| Weight | 0.105 kg |
| Placement on Vehicle | both sides |
| Length | 196 mm |
| Housing Diameter | 18 mm |
| Eject Force | 500 N |
| Stroke | 36 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.89
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Weight | 0.350 kg |
| for OE number | 5Q0 412 303 C S1 |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (186195)
- 2x Febi Protective Cap/Bellow, shock absorber (46720)
£21.89
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023