Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 2320 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Weight | 0.270 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Hose Length | 250 mm |
| Weight | 0.241 kg |
| Placement on Vehicle | Upper |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Paired article numbers | 49256 |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Function | Tappet |
| Operating Mode | Hydraulic |
| Weight | 0.057 kg |
| Placement on Vehicle | Intake Side, Exhaust Side |
| Type | Tappet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tappet (22344)
- 1x Febi Finger Follower, engine timing (26938)
- 1x Febi Thrust Piece, intake/exhaust valve (29906)
£22.13
Important compatibility info
| Weight | 0.500 kg |
| Placement on Vehicle | Lower, Front Axle Left |
| Paired article numbers | 15069 |
| Cone Size | 22 mm |
| Mounting points diameter | 12.5 mm |
| Function | Ball Joint |
| External Thread Size | M16 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Replaces | 41257 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Mounting points diameter | 16.5 mm |
| Housing Diameter | 19 mm |
| Placement on Vehicle | both sides |
| Length | 497 mm |
| Housing length | 269 mm |
| Eject Force | 610 N |
| Stroke | 180 mm |
| Weight | 0.25 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.47 kg |
| Placement on Vehicle | Front |
| Engine Management | Timing Belt |
| Function | Sprocket, crankshaft |
| Type | Sprocket, crankshaft |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (25172)
- 1x Febi Pulley Bolt (17230)
£22.13
Important compatibility info
| Weight | 0.7 kg |
| Placement on Vehicle | Front Axle, Upper |
| Material | Rubber/Metal |
| Outer diameter | 114 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Height | 49 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Width | 31.5 mm |
| Material | Plastic |
| Outer diameter | 64 mm |
| Number of grooves | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 21.5 mm |
| Weight | 0.195 kg |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Placement on Vehicle | Upper Left |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Weight | 0.431 kg |
| Type | Radiator Hose |
| Hose Length | 520 mm |
| Additional Information 2 | with quick couplers |
| for OE number | 204 501 07 82 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.263 kg |
| Placement on Vehicle | both sides |
| Length | 436 mm |
| Housing Diameter | 18 mm |
| Eject Force | 350 N |
| Stroke | 160 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 238.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.530 kg |
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| DIN / ISO | 7867 |
| Length | 2315 mm |
| Weight | 0.24 kg |
| Function | V-Ribbed Belt |
| Number of Ribs | 6 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Length | 170 mm |
| Width | 155 mm |
| Material | Rubber/Metal |
| Inner diameter | 14 mm |
| Weight | 1.55 kg |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 56 mm |
| Outer diameter | 99 mm. 151 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.540 kg |
| Placement on Vehicle | Lower, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.174 kg |
| Placement on Vehicle | both sides |
| Length | 408 mm |
| Housing Diameter | 20 mm |
| Eject Force | 300 N |
| Stroke | 152 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 1.89 kg |
| Placement on Vehicle | Rear Axle |
| Width | 45 mm |
| Outer diameter | 200 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 5 mm |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Length | 1120 mm |
| Number of Connectors / Ports | 2 |
| Weight | 0.083 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.395 kg |
| Inner Length | 838 mm |
| Outer Length | 1205 mm |
| Type | Cable Pull, clutch control |
| Function | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.500 kg |
| Cone Size | 22 mm |
| Mounting points diameter | 12.5 mm |
| Placement on Vehicle | Lower, Front Axle Right |
| Paired article numbers | 15068 |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| External Thread Size | M16 x 1,5 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.31 kg |
| Function | Bushing, axle beam |
| Thickness | 66 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Front |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.035 kg |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Cooling Hose | from engine to thermostat |
| Function | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Weight | 0.272 kg |
| Additional Information | with quick coupling |
| Type | Radiator Hose |
| Hose Length | 290 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.117 kg |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 27859 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.287 kg |
| Length | 2113 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.500 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Thread Length | 22.5 mm |
| Function | Repair Kit, suspension strut support mount |
| External Thread Size | M8 x 1,25 |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| Inner diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket Set, cylinder head cover |
| Weight | 0.052 kg |
| for OE number | 11 12 8 511 814 |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 418 mm |
| Housing Diameter | 22 mm |
| Eject Force | 490 N |
| Stroke | 163 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 230 mm |
| Piston conrod diameter | 8 mm |
| Weight | 0.282 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.547 kg |
| Function | Expansion Tank, coolant |
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Weight | 0.600 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Outer diameter | 109 mm |
| Inner diameter | 13 mm |
| Placement on Vehicle | Front Axle |
| Weight | 0.53 kg |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (38308)
- 1x Febi Nut (30005)
- 1x Febi Nut (15428)
£22.13
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023