Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.42 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Hole Spacing | 120 mm |
| for OE number | 51732681 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Function | Radiator Hose |
| Cooling Hose | from engine to thermostat |
| Placement on Vehicle | Upper Right |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.127 kg |
| Hose Length | 115 mm |
| Additional Information | with quick coupling |
| Type | Radiator Hose |
| Additional Information 2 | with heat shield pipe, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Function | Gasket, oil sump |
| Weight | 0.030 kg |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.13
Important compatibility info
| Weight | 0.47 kg |
| Placement on Vehicle | Front |
| Engine Management | Timing Belt |
| Function | Sprocket, crankshaft |
| Type | Sprocket, crankshaft |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (25172)
- 1x Febi Pulley Bolt (17230)
£22.13
Important compatibility info
| Type | Fuel filter |
| Pipe Diameter | 10 mm |
| Weight | 0.516 kg |
| Filter type | with water drain screw, In-Line Filter, with connection for water sensor |
| Outer diameter | 98 mm |
| Height | 126 mm |
| Additional Information | with valve |
| Function | Fuel filter |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.14
Important compatibility info
| Additional Information | with counter nut |
| External Thread Size | M15 x 1,5, M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 242.5 mm |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Weight | 0.668 kg |
| Replaces | 43228 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.14
Important compatibility info
| Additional Information 2 | with anti-squeak plate, with fastening material |
| Weight | 1.650 kg |
| Placement on Vehicle | Front Axle |
| Length | 131.9 mm |
| Width | 59.7 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.14
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 34 mm |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Weight | 0.756 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Inner diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.14
Important compatibility info
| Additional Information 2 | with piston clip |
| Weight | 2.05 kg |
| Placement on Vehicle | Front Axle |
| Length | 155.2 mm |
| Width | 59.2 mm. 64.4 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.9 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.14
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.02 kg |
| Wash Nozzle Type | Heated |
| Type | Washer Fluid Jet, window cleaning |
| Function | Washer Fluid Jet, window cleaning |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.14
Important compatibility info
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Weight | 0.060 kg |
| Paired article numbers | 175651 |
| Placement on Vehicle | Right |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.15
Important compatibility info
| Function | Wheel Bearing Kit |
| Outer diameter | 74 mm |
| Inner diameter | 40 mm |
| Width | 34 mm |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.860 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.15
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Inner diameter | 12.2 mm |
| Weight | 0.511 kg |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.15
Important compatibility info
| Weight | 0.65 kg |
| Type | Air Filter |
| Function | Air Filter |
| Filter type | Filter Insert |
| Height | 392 mm |
| Outer diameter | 172 mm |
| Inner diameter | 134 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.15
Important compatibility info
| Additional Information | with lift cylinder |
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Weight | 0.060 kg |
| Paired article numbers | 175652 |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.15
Important compatibility info
| Function | Sensor, camshaft position |
| Number of Connectors / Ports | 2 |
| Outer diameter | 18 mm |
| Length | 52.5 mm |
| Type | Sensor, camshaft position |
| Weight | 0.030 kg |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.15
Important compatibility info
| Weight | 0.420 kg |
| Placement on Vehicle | Front |
| Length | 1200 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.15
Important compatibility info
| Wire Diameter | 13.5 mm |
| Weight | 1.85 kg |
| Placement on Vehicle | Front Axle |
| Length | 220 mm |
| Outer diameter | 172 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.15
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 12.2 mm |
| Additional Information 2 | without ball bearing |
| Weight | 0.413 kg |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Thickness | 39.5 mm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.16
Important compatibility info
| Outer diameter | 69 mm |
| Material | Plastic |
| Weight | 0.28 kg |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.16
Important compatibility info
| Weight | 0.94 kg |
| Placement on Vehicle | Rear Axle |
| Length | 106.1 mm |
| Width | 45.5 mm |
| Brake System | TRW |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.16
Important compatibility info
| Placement on Vehicle | both sides |
| Housing Diameter | 20 mm |
| Eject Force | 420 N |
| Stroke | 181 mm |
| Weight | 0.4 kg |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 271 mm |
| Length | 498 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.16
Important compatibility info
| Weight | 0.538 kg |
| Material | Rubber/Metal |
| Replaces | 01951 |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (05155)
- 1x Febi Rolling Bearing, suspension strut support mount (01874)
£22.16
Important compatibility info
| Function | Gas Spring, rear window |
| Housing length | 216.5 mm |
| Type | Gas Spring, rear window |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Stroke | 139 mm |
| Eject Force | 180 N |
| Housing Diameter | 18 mm |
| Weight | 0.200 kg |
| Length | 393 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.16
Important compatibility info
| Notches / Holes Number | 1 |
| Type | Exhaust Valve |
| Function | Exhaust Valve |
| Weight | 0.195 kg |
| Valve head diameter | 46 mm |
| Length | 191.4 mm |
| Valve stem diameter | 9.940 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.16
Important compatibility info
| Weight | 0.500 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (22943)
- 1x Febi Rolling Bearing, suspension strut support mount (31291)
£22.17
Important compatibility info
| Weight | 0.060 kg |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 885 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.17
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.288 kg |
| Width | 56 mm |
| Length | 218 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (23422)
- 2x Febi Protective Cap/Bellow, shock absorber (176486)
£22.17
Important compatibility info
| Weight | 0.44 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.17
Important compatibility info
| Type | V-Ribbed Belt |
| Number of Ribs | 8 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Alternator type | for starter generator |
| Length | 954 mm |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Weight | 0.127 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.17
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023