Important compatibility info
Weight | 1.5 kg |
Outer diameter | 345 mm |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Rated Power | 100 W, 60 W |
Number of Wings | 7 |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Ignition Coil | 4 Spark |
Function | Ignition Coil |
Weight | 1.022 kg |
Replaces | 19032 |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.326 kg |
Width | 25 mm |
Outer diameter | 60 mm |
Inner diameter | 8 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Width of castor bearing surface | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.188 kg |
Length | 165 mm |
Outer diameter | 61 mm |
Additional Information 2 | with pressure regulator |
Filter type | In-Line Filter |
Number of Connectors / Ports | 3 |
Pressure | 4 bar |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, exterior temperature |
Type | Sensor, exterior temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Repair Set, door |
Placement on Vehicle | both sides, Front and Rear |
Additional Information | with squeeze connector |
Cable Length | 420 mm |
Number of circuits | 28 |
Weight | 0.178 kg |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.5 kg |
for OE number | 6Q0 820 803 G |
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with belt pulley |
Belt Pulley Diameter | 110 mm |
Oil Fill Quantity | 150 ml |
Type | Compressor, air conditioning |
Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.126 kg |
Material | Plastic |
Colour | Black |
Combi Switch Function | with wipe-wash function, with rear wipe-wash function |
Function | Steering Column Switch |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 40 mm |
Outer diameter | 200 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 5 mm |
Function | Brake Shoe Set |
Weight | 1.52 kg |
Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.222 kg |
Placement on Vehicle | Rear Axle |
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (23410)
- 2x Febi Protective Cap/Bellow, shock absorber (19286)
Important compatibility info
Additional Information | with nuts |
Extra Description | ProKit |
Inner diameter | 21 mm |
Thickness | 51 mm |
Outer diameter | 63 mm. 71 mm |
Material | Rubber/Metal |
Weight | 0.49 kg |
Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (31253)
- 2x Febi Nut, ball joint (21884)
- 2x Febi Screw (39229)
- 2x Febi Mounting Paste (31941)
Important compatibility info
Weight | 0.177 kg |
Length | 248 mm |
Height | 30 mm |
Width | 216 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | FPM (fluoride rubber) |
Outer diameter | 42 mm |
Placement on Vehicle | frontal sided |
Function | Shaft Seal, camshaft |
Inner diameter | 27 mm |
Thickness | 8 mm |
Weight | 0.009 kg |
Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 16 mm |
Placement on Vehicle | Front Axle |
Weight | 0.216 kg |
Function | Mounting Kit, stabiliser bar |
Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (27638)
- 1x Febi Bracket, stabiliser mounting (37148)
- 1x Febi Bracket, stabiliser mounting (37147)
- 4x Febi Screw (37063)
Important compatibility info
Weight | 0.02 kg |
Function | Frost Plug |
Outer diameter | 42.3 mm |
Extra Description | febi Plus |
Type | Frost Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Number of Connectors / Ports | 3 |
Function | Pressure Switch, air conditioning |
Type | Pressure Switch, air conditioning |
for OE number | 1K0 959 126 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.093 kg |
Voltage | 12 V |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Number of Connectors / Ports | 2 |
Replaces | 09088; 12793; 26257 |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.878 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 19816 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Adjustable | Adjustable |
External Thread Size | M14 x 1,5, M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (32473)
- 1x Febi Tie Rod End (19814)
Important compatibility info
Weight | 0.031 kg |
External Thread Size | M10 x 1 |
Number of Connectors / Ports | 1 |
Colour Coding | Green |
Function | Oil Pressure Switch |
Switch point to | 0.6 bar |
Switch point from | 0.3 bar |
Spanner Size | 22 |
Type | Oil Pressure Switch |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Resistor, interior blower |
Number of Connectors / Ports | 4 |
Weight | 0.045 kg |
Extra Description | febi Plus |
Type | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023