Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Left, Right |
| Length | 725 mm |
| Weight | 0.872 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 0.52 kg |
| Placement on Vehicle | both sides |
| Length | 656 mm |
| Housing Diameter | 22 mm |
| Eject Force | 880 N |
| Stroke | 165 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 447.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 0.454 kg |
| Replaces | 14316 |
| Placement on Vehicle | Front Axle Left, Upper, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21906 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Length | 942 mm |
| Type | V-Ribbed Belt |
| Alternator type | for starter generator |
| Function | V-Ribbed Belt |
| Weight | 0.128 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 1.84 kg |
| Placement on Vehicle | Front Axle |
| Length | 334 mm |
| Outer diameter | 157 mm |
| Function | Suspension Spring |
| Wire Diameter | 12.5 mm |
| Number of Coils | 4.4 |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Number of Ribs | 5 |
| Tensile Cord Material | Aramid |
| Weight | 0.110 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1495 mm |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 1.06 kg |
| Placement on Vehicle | Front Axle Left, Outer, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Width | 31 mm |
| Outer diameter | 110 mm |
| Inner diameter | 70 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
| Bearing Code | 33014 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 0.066 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1015 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21904 |
| Replaces | 14314 |
| Placement on Vehicle | Front Axle Right, Upper, Rear |
| Weight | 0.454 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Length | 2120 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1200 Ohm |
| Cable Length | 2000 mm |
| Function | Sensor, wheel speed |
| Weight | 0.145 kg |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 0.048 kg |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 173587 |
| Number of Connectors / Ports | 2 |
| Cable Length | 690 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 1.63 kg |
| Placement on Vehicle | Front Axle |
| Length | 132.8 mm |
| Width | 58.2 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Manufacturer | HYUNDAI KIA |
| Model | i20 RIO STONIC |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 0.558 kg |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 10 mm |
| Stroke | 183 mm |
| Eject Force | 870 N |
| Housing Diameter | 22 mm |
| Length | 719 mm |
| Placement on Vehicle | both sides |
| Mounting points diameter | 18 mm |
| Type | Gas Spring, boot/cargo area |
| Housing length | 395.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 0.301 kg |
| Length | 2100 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 9 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Housing length | 255 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Stroke | 97 mm |
| Eject Force | 530 N |
| Housing Diameter | 18 mm |
| Weight | 0.2 kg |
| Length | 389 mm |
| Placement on Vehicle | both sides |
| Additional Information | Change interval/date according to gas spring imprint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Diameter 1 | 6 mm |
| Type | Tarpaulin rope |
| Function | Tarpaulin rope |
| Weight | 1.3 kg |
| Length | 34.5 m |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Left, Right |
| Function | Wiper Bearing |
| Weight | 0.4 kg |
| Type | Wiper Bearing |
| Hole Spacing | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 0.042 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 640 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Number of Ribs | 7 |
| Weight | 0.100 kg |
| Length | 994 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 0.06 kg |
| Cable Length | 740 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| for OE number | 77 00 426 721 |
| Type | Radiator Hose |
| Cooling Hose | from engine to engine cooler |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Radiator Hose |
| Weight | 0.477 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Length | 630 mm |
| Weight | 0.026 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Function | Pressure Switch, axle load control |
| Spanner Size | 27 |
| Thread Length | 11 mm |
| Weight | 0.06 kg |
| Operating Mode | Mechanical |
| Thickness | 56.7 mm |
| Type | Pressure Switch, axle load control |
| Control Type | Push Actuation |
| Number of Connectors / Ports | 2 |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Weight | 0.39 kg |
| Filter type | Filter Insert |
| Width | 134 mm |
| Additional Information 2 | with pre-filter |
| Height | 39 mm |
| Length | 675 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Length | 1122 mm |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Weight | 0.134 kg |
| Alternator type | for starter generator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Function | Spring, driver cab suspension |
| Type | Spring, driver cab suspension |
| Thickness | 297 mm |
| Weight | 0.5 kg |
| Outer diameter | 88 mm |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Function | Seal Kit, multi-valve |
| Weight | 0.099 kg |
| Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, air compressor (35729)
- 1x Febi Cylinder Head Gasket, air compressor (35730)
- 1x Febi Seal Kit, multi-valve (35768)
- 1x Febi Piston Ring Set, air compressor (35775)
- 1x Febi Seal, air compressor (35731)
- 2x Febi Nut (35732)
- 2x Febi Seal Kit, multi-valve (35733)
- 2x Febi Pressure Limiting Valve (35774)
£23.60
Important compatibility info
| Weight | 0.106 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 107660 |
| Number of Connectors / Ports | 2 |
| Resistance | 1800 Ohm |
| Cable Length | 1470 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Outer diameter | 71 mm |
| Inner diameter | 60 mm |
| Type | Radiator Hose |
| Function | Radiator Hose |
| Weight | 0.589 kg |
| for OE number | 2124 556 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Length | 1040 mm |
| Width | 14 mm |
| Material | NBR (nitrile butadiene rubber) |
| Thickness | 17 mm |
| Function | Gasket, oil sump |
| Weight | 0.444 kg |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Resistance | 1180 Ohm |
| Cable Length | 3590 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Rear Axle Left |
| Additional Information | with bush |
| Paired article numbers | 106259 |
| Number of Connectors / Ports | 2 |
| Weight | 0.26 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Function | Joint Kit, drive shaft |
| External Teeth, Diff.Side | 25 |
| Weight | 1.500 kg |
| Int. teeth, diff.side, conn.to transm. | 21 |
| Type | Joint Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Length | 4350 mm |
| Outer diameter | 6 mm |
| Spanner Size | 14 |
| Function | Hose Line, driver cab tilting device |
| Internal Thread Size | M12 x 1,5 |
| Weight | 0.144 kg |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hose Line, driver cab tilting device (26007)
- 2x Febi Hose Line, driver cab tilting device (105733)
- 2x Febi Nut (104612)
£23.60
Important compatibility info
| Housing length | 389.5 mm |
| Mounting points diameter | 18 mm |
| Weight | 0.332 kg |
| Placement on Vehicle | Left |
| Length | 722 mm |
| Eject Force | 180 N |
| Stroke | 306 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Length | 1203 mm |
| Number of Ribs | 7 |
| Weight | 0.126 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Type | V-Ribbed Belt |
| Weight | 0.124 kg |
| Number of Ribs | 6 |
| Alternator type | for starter generator |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1325 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 0.331 kg |
| Housing length | 378.5 mm |
| Mounting points diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 713 mm |
| Eject Force | 290 N |
| Stroke | 303 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Weight | 0.145 kg |
| Placement on Vehicle | both sides |
| Length | 216 mm |
| Colour | Black |
| Housing Diameter | 19 mm |
| Eject Force | 720 N |
| Stroke | 52 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 134 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Width | 47 mm |
| Material | Metal |
| Outer diameter | 85 mm |
| Mounting points diameter | 12 mm |
| Function | Tensioner Pulley, v-ribbed belt |
| Width of castor bearing surface | 46.5 mm |
| Weight | 0.994 kg |
| Type | Tensioner Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.61
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 141.9 mm |
| Width | 64.1 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.2 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 2.062 kg |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.61
Important compatibility info
| Function | Exhaust Valve |
| Length | 73.3 mm |
| Weight | 0.116 kg |
| Valve head diameter | 58.95 mm |
| Type | Exhaust Valve |
| Notches / Holes Number | 1 |
| Valve stem diameter | 7.985 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.61
Important compatibility info
| Weight | 0.30 kg |
| Material | Metal |
| Outer diameter | 92 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.61
Important compatibility info
| Housing Diameter | 22 mm |
| Eject Force | 500 N |
| Stroke | 193 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 281.5 mm |
| Mounting points diameter | 17.8 mm |
| Placement on Vehicle | both sides |
| Weight | 0.347 kg |
| Length | 500 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.61
Important compatibility info
| Weight | 0.05 kg |
| Voltage | 14.5 V |
| Function | Alternator Regulator |
| Type | Alternator Regulator |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.61
Important compatibility info
| Weight | 0.038 kg |
| Material | Plastic |
| Colour | Black |
| Function | Hazard Warning Light Switch |
| Extra Description | febi Plus |
| Type | Hazard Warning Light Switch |
| Switch Lighting | Yellow |
| Number of Connectors / Ports | 6 |
| Combi Switch Function | with hazard warning light function, Door Locking |
| Placement on Vehicle | Centre Console |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.61
Important compatibility info
| Placement on Vehicle | Front Axle Right, Rear |
| Length | 139 mm |
| Width | 129 mm |
| Outer diameter | 60 mm. 31 mm |
| Thickness | 62 mm |
| Inner diameter | 23 mm. 13 mm |
| Paired article numbers | 22102 |
| Function | Mounting, control/trailing arm |
| Weight | 1.062 kg |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.61
Important compatibility info
| Weight | 0.409 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186667, 186747 |
| for OE number | 1 733 896 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.61
Important compatibility info
| Extra Description | ProKit |
| Function | Mounting, control/trailing arm |
| Weight | 0.160 kg |
| Type | Mounting, control/trailing arm |
| Additional Information 2 | with bolts/screws |
| Thickness | 52 mm |
| Outer diameter | 53 mm |
| Material | Rubber/Metal |
| Inner diameter | 10.2 mm |
| Placement on Vehicle | Upper, Front Axle Left, inner, Front Axle Right |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (105830)
- 1x Febi Bolt, control arm (172805)
- 1x Febi Bolt, control arm (173768)
- 1x Febi Nut (173396)
- 1x Febi Nut (173767)
- 1x Febi Nut (174700)
£23.62
Important compatibility info
| Length | 381 mm |
| Function | Air Filter |
| Weight | 0.963 kg |
| Filter type | Filter Insert |
| Outer diameter 2 | 183 mm |
| Outer diameter 1 | 163 mm |
| Inner diameter | 134 mm |
| Additional Information | with gasket/seal |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.62
Important compatibility info
| Weight | 1.17 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 26762 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (22620)
- 1x Febi Tie Rod End (26759)
£23.62
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023