Important compatibility info
Weight | 0.042 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 640 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 630 mm |
Weight | 0.026 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Seal Kit, multi-valve |
Weight | 0.099 kg |
Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, air compressor (35729)
- 1x Febi Cylinder Head Gasket, air compressor (35730)
- 1x Febi Seal Kit, multi-valve (35768)
- 1x Febi Piston Ring Set, air compressor (35775)
- 1x Febi Seal, air compressor (35731)
- 2x Febi Nut (35732)
- 2x Febi Seal Kit, multi-valve (35733)
- 2x Febi Pressure Limiting Valve (35774)
Important compatibility info
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Tensile Cord Material | Aramid |
Length | 1203 mm |
Number of Ribs | 7 |
Weight | 0.126 kg |
Alternator type | for starter generator |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.301 kg |
Length | 2100 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 9 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.106 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 107660 |
Number of Connectors / Ports | 2 |
Resistance | 1800 Ohm |
Cable Length | 1470 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Outer diameter | 71 mm |
Inner diameter | 60 mm |
Type | Radiator Hose |
Function | Radiator Hose |
Weight | 0.589 kg |
for OE number | 2124 556 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Cable Length | 1044 mm |
Weight | 0.100 kg |
Number of Connectors / Ports | 2 |
Paired article numbers | 106715 |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1040 mm |
Width | 14 mm |
Material | NBR (nitrile butadiene rubber) |
Thickness | 17 mm |
Function | Gasket, oil sump |
Weight | 0.444 kg |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Type | Air Filter |
Weight | 0.39 kg |
Filter type | Filter Insert |
Width | 134 mm |
Additional Information 2 | with pre-filter |
Height | 39 mm |
Length | 675 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Spring, driver cab suspension |
Type | Spring, driver cab suspension |
Thickness | 297 mm |
Weight | 0.5 kg |
Outer diameter | 88 mm |
Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 107659 |
Number of Connectors / Ports | 2 |
Resistance | 1800 Ohm |
Cable Length | 1470 mm |
Function | Sensor, wheel speed |
Weight | 0.103 kg |
Type | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
External Teeth, Diff.Side | 25 |
Weight | 1.500 kg |
Int. teeth, diff.side, conn.to transm. | 21 |
Type | Joint Kit, drive shaft |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Diameter 1 | 6 mm |
Type | Tarpaulin rope |
Function | Tarpaulin rope |
Weight | 1.3 kg |
Length | 34.5 m |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.52 kg |
Placement on Vehicle | both sides |
Length | 656 mm |
Housing Diameter | 22 mm |
Eject Force | 880 N |
Stroke | 165 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 447.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing Diameter | 22 mm |
Eject Force | 500 N |
Stroke | 193 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 281.5 mm |
Mounting points diameter | 17.8 mm |
Placement on Vehicle | both sides |
Weight | 0.347 kg |
Length | 500 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Rear |
Length | 139 mm |
Width | 129 mm |
Outer diameter | 60 mm. 31 mm |
Thickness | 62 mm |
Inner diameter | 23 mm. 13 mm |
Paired article numbers | 22102 |
Function | Mounting, control/trailing arm |
Weight | 1.062 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Exhaust Valve |
Length | 73.3 mm |
Weight | 0.116 kg |
Valve head diameter | 58.95 mm |
Type | Exhaust Valve |
Notches / Holes Number | 1 |
Valve stem diameter | 7.985 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 141.9 mm |
Width | 64.1 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.2 mm |
Function | Brake Pad Set, disc brake |
Weight | 2.062 kg |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.409 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for turbocharger (art. no.) | 186667, 186747 |
for OE number | 1 733 896 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 47 mm |
Material | Metal |
Outer diameter | 85 mm |
Mounting points diameter | 12 mm |
Function | Tensioner Pulley, v-ribbed belt |
Width of castor bearing surface | 46.5 mm |
Weight | 0.994 kg |
Type | Tensioner Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Control Type | Rocker Actuation |
Weight | 0.018 kg |
Number of Connectors / Ports | 4 |
Switch Lighting | Amber-coloured |
Additional Information 2 | Chromed edge |
Type | Switch, window regulator |
Function | Switch, window regulator |
Housing Colour | black, silver |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 51 mm |
Thickness | 65 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 51 mm |
Function | Mounting, stabiliser bar |
Inner diameter | 31 mm |
Weight | 0.144 kg |
Type | Mounting, stabiliser bar |
Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, stabiliser bar (183882)
- 1x Febi Mounting, stabiliser bar (183883)
Important compatibility info
Length | 60 mm |
Outer diameter | 74 mm |
Inner diameter | 50 mm |
Function | Mounting, stabiliser bar |
Weight | 0.150 kg |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 14 mm |
Outer diameter | 88 mm. 109 mm |
Material | Rubber/Metal |
Width | 147 mm |
Height | 50 mm |
Length | 167 mm |
Placement on Vehicle | Front Axle |
Weight | 0.97 kg |
Additional Information 2 | with ball bearing |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (17803)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
Important compatibility info
Length | 2020 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 10 |
Function | V-Ribbed Belt |
Weight | 0.329 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Function | Mounting, control/trailing arm |
Weight | 0.160 kg |
Type | Mounting, control/trailing arm |
Additional Information 2 | with bolts/screws |
Thickness | 52 mm |
Outer diameter | 53 mm |
Material | Rubber/Metal |
Inner diameter | 10.2 mm |
Placement on Vehicle | Upper, Front Axle Left, inner, Front Axle Right |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (105830)
- 1x Febi Bolt, control arm (172805)
- 1x Febi Bolt, control arm (173768)
- 1x Febi Nut (173396)
- 1x Febi Nut (173767)
- 1x Febi Nut (174700)
Important compatibility info
Weight | 1.17 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 26762 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (22620)
- 1x Febi Tie Rod End (26759)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Resistance | 1185 Ohm |
Cable Length | 1390 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Weight | 0.094 kg |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 70 mm |
Additional Information 2 | with crown nut |
Thread Size | M18 x 1,5 |
Weight | 0.600 kg |
Cone Size | 22.2 mm |
Type | Tie Rod End |
Function | Tie Rod End |
Extra Description | ProKit |
External Thread Size | M20 x 1,5 |
Thread Type | with left-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023