Important compatibility info
Material | Cast Aluminium |
Number of Teeth | 23 |
Number of Wings | 8 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Weight | 0.702 kg |
Type | Water Pump, engine cooling |
Additional Information | without gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.62 kg |
Length | 155.1 mm |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 15.8 mm |
Inspection Tag | ECE R90 Approved |
Width | 61.8 mm |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.49 kg |
Placement on Vehicle | Front Axle |
Length | 310 mm |
Outer diameter | 142 mm |
Function | Suspension Spring |
Type | Suspension Spring |
Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Height | 51 mm |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Suspension Strut Support Mount |
Weight | 0.934 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Resistance | 1300 Ohm |
Weight | 0.136 kg |
Length | 1595 mm |
Cable Length | 1515 mm |
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Additional Information | with sleeve, with grease |
for OE number | 001 153 04 20 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, control/trailing arm |
Inner diameter | 16 mm |
Weight | 0.426 kg |
Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
Length | 65 mm |
Material | Rubber/Metal |
Width | 65 mm |
Outer diameter | 55 mm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Rear |
Length | 1601 mm |
Weight | 0.680 kg |
Paired article numbers | 170424 |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.905 kg |
Placement on Vehicle | Rear Axle, Front and Rear |
Outer diameter | 60 mm |
Inner diameter | 22 mm |
Material | Rubber/Metal |
Length | 76 mm |
Function | Bush, spring eye |
Type | Bush, spring eye |
Shape/Form | slotted |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.22 kg |
Width | 19 mm |
Outer diameter | 60 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.94 kg |
Placement on Vehicle | Front Axle |
Function | Tie Rod |
External Thread Size | M12 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod |
Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (02287)
- 1x Febi Tie Rod End (04452)
Important compatibility info
Weight | 1.21 kg |
Outer diameter | 34 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Placement on Vehicle | Front Axle |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.50 kg |
Placement on Vehicle | Front Axle Left, Upper, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 32319 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.450 kg |
Placement on Vehicle | Front Axle |
Length | 122.8 mm |
Width | 58.4 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.4 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 32318 |
Placement on Vehicle | Front Axle Right, Upper, Front |
Weight | 0.50 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.721 kg |
Placement on Vehicle | Rear Axle |
Length | 129 mm |
Width | 65.3 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.9 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 151.9 mm |
Width | 64.5 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.9 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Weight | 1.990 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Warning Contact Set, brake pad wear |
Type | Warning Contact Set, brake pad wear |
Quantity | 2 |
Weight | 0.075 kg |
Number of Connectors / Ports | 2 |
Length | 777 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.032 kg |
Length | 57 mm |
Height | 42 mm |
Function | Sensor, boost pressure |
Width | 50 mm |
Number of Connectors / Ports | 4 |
Type | Sensor, boost pressure |
for OE number | 51.27421.0216 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 174755 |
Number of Connectors / Ports | 2 |
Cable Length | 690 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left |
Weight | 0.050 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.53 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Front, Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023