Important compatibility info
Outer diameter | 80 mm |
Length | 155 mm |
Function | Joint Kit, drive shaft |
Weight | 1.8 kg |
Seal Diameter | 52 mm |
Internal Teeth, wheel side | 28 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Number of Teeth, ABS ring | 29 |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 22 |
External Thread Size | M20 x 1 |
Important compatibility info
Function | Hydraulic Filter, automatic transmission |
Weight | 0.148 kg |
Type | Hydraulic Filter, automatic transmission |
Length | 168.5 mm |
Height | 85 mm |
Width | 111 mm |
Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 151.4 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Thickness/Strength 1 | 15.8 mm |
Weight | 1.570 kg |
Inspection Tag | ECE R90 Approved |
Width | 52.6 mm |
Wear Warning Contact | with acoustic wear warning |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.271 kg |
Placement on Vehicle | both sides |
Length | 556 mm |
Housing Diameter | 18 mm |
Eject Force | 450 N |
Stroke | 224 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 302.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Nut, kingpin |
Type | Nut, kingpin |
Weight | 1.1 kg |
Spanner Size | 120 |
Paired article numbers | 182467 |
Placement on Vehicle | Left |
Bolt Head/Nut Design | Male Hex |
Height | 25 mm |
Material | Steel |
Surface | Phosphatized |
Thread Type | with left-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 300 mm |
Width | 600 mm |
Weight | 1.4 kg |
Type | Mudflap |
Function | Mudflap |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.26 kg |
Placement on Vehicle | both sides |
Length | 516 mm |
Housing Diameter | 18 mm |
Eject Force | 160 N |
Stroke | 184 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Housing length | 308.5 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 226 mm |
Additional Information | with counter nut |
Outer diameter | 42 mm |
Spanner Size | 37 |
Weight | 0.58 kg |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.327 kg |
Height | 137 mm |
Width | 137 mm |
Filter type | In-Line Filter |
Type | Fuel filter |
Function | Fuel filter |
Length | 194 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | V-Ribbed Belt |
Weight | 0.124 kg |
Number of Ribs | 6 |
Alternator type | for starter generator |
Function | V-Ribbed Belt |
Tensile Cord Material | Aramid |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1325 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023