Important compatibility info
Placement on Vehicle | Left |
Paired article numbers | 176681 |
Weight | 0.064 kg |
Type | Washer Fluid Jet, headlight cleaning |
Function | Washer Fluid Jet, headlight cleaning |
Extra Description | febi Plus |
Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right, Centre |
Weight | 0.698 kg |
Type | Roller Guide, sliding door |
Function | Roller Guide, sliding door |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.683 kg |
Placement on Vehicle | Rear Axle |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | without ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (32164)
- 1x Febi Nut (37956)
- 1x Febi Screw (39539)
- 2x Febi Screw (37958)
- 1x Febi Nut (37957)
Important compatibility info
Outer diameter | 60 mm |
Inner diameter | 8.2 mm |
Function | Tensioner Pulley, timing belt |
Weight | 0.29 kg |
Type | Tensioner Pulley, timing belt |
Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gas Spring, boot/cargo area |
Eject Force | 490 N |
Stroke | 182 mm |
Piston conrod diameter | 10 mm |
Type | Gas Spring, boot/cargo area |
Housing Diameter | 22 mm |
Weight | 0.4 kg |
Placement on Vehicle | both sides |
Length | 513 mm |
Housing length | 304 mm |
Mounting points diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 72.7 mm. 45 mm |
Outer diameter | 18.8 mm. 11.9 mm. 10.35 mm |
Function | Lock Cylinder |
Weight | 0.07 kg |
Type | Lock Cylinder |
Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Steering arm type | Control Arm |
Weight | 1.926 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 945 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Sensor Type | Differential Pressure Sensor |
Weight | 0.026 kg |
Number of Connectors / Ports | 3 |
Type | Sensor, exhaust pressure |
Function | Sensor, exhaust pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Length | 281 mm |
Outer diameter | 88 mm |
Weight | 1.9 kg |
Type | Spring, driver cab suspension |
Function | Spring, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 183478 |
Length | 663 mm |
Placement on Vehicle | Front Axle Left |
Function | Brake Hose |
Type | Brake Hose |
Weight | 0.31 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Shaft Seal, differential |
Sealing lip material | FPM (fluoride rubber) |
Type | Shaft Seal, differential |
Outer diameter 1 | 135 mm |
Weight | 0.27 kg |
Inner diameter | 80 mm |
Thickness | 18 mm |
Outer diameter | 154 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Spring, driver cab suspension |
Function | Spring, driver cab suspension |
Weight | 2.0 kg |
Placement on Vehicle | Front, Rear |
Thickness | 266 mm |
Outer diameter | 89 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane) |
Weight | 0.334 kg |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (36530)
- 2x Febi Protective Cap/Bellow, shock absorber (40088)
Important compatibility info
Weight | 0.037 kg |
Number of Connectors / Ports | 4 |
Type | Resistor, interior blower |
Function | Resistor, interior blower |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.66 kg |
Placement on Vehicle | Rear Axle |
Function | Gasket Set, differential |
Type | Gasket Set, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, differential (29782)
- 1x Febi Shaft Seal, differential (29783)
Important compatibility info
Weight | 0.74 kg |
Placement on Vehicle | Rear Axle, Front |
Function | Bush Set, axle beam |
Bearing/Mounting Type | Hydro Mount |
Inner diameter | 16 mm |
Outer diameter | 61 mm |
Material | Rubber/Metal |
Width | 58 mm |
Type | Bush Set, axle beam |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle cross member (06668)
- 2x Febi Screw (06673)
- 2x Febi Bushing, axle beam (06674)
Important compatibility info
Weight | 1.3 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 1844.92 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 144.8 mm |
Width | 75.5 mm |
Inspection Tag | ECE R90 Approved |
Weight | 2.178 kg |
Thickness/Strength 1 | 16 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Tensile Cord Material | Aramid |
Function | V-Ribbed Belt |
Number of Ribs | 6 |
Type | V-Ribbed Belt |
Alternator type | for starter generator |
Weight | 0.194 kg |
Length | 1986 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.987 kg |
Width | 139 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 45 mm |
Inner diameter | 31.5 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Type | Wheel Hub |
Function | Wheel Hub |
Additional Information 2 | without wheel bearing |
Outer diameter 1 | 139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 95 °C |
Function | Thermostat, coolant |
Replaces | 34876 |
Type | Thermostat, coolant |
Weight | 0.100 kg |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Right, Upper |
Material | Sheet Steel |
Additional Information 2 | with bearing |
Steering arm type | Control Arm |
Paired article numbers | 183595 |
Weight | 1.449 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 183594 |
Weight | 1.449 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Placement on Vehicle | Rear Axle Left, Upper |
Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.380 kg |
Type | Dust Cover Kit, shock absorber |
Placement on Vehicle | Rear Axle |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, Upper |
Weight | 0.207 kg |
Type | Holder, engine mounting system |
Function | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.238 kg |
Type | Bushing, axle beam |
Material | Rubber/Metal |
Outer diameter | 63.9 mm |
Thickness | 64 mm |
Inner diameter | 11.7 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 0.976 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Spring |
Wire Diameter | 11.8 mm |
Placement on Vehicle | Front Axle |
Length | 354 mm |
Weight | 1.72 kg |
Type | Suspension Spring |
Outer diameter | 134 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 112 mm |
Thickness | 16.5 mm |
Inner diameter | 10 mm |
Placement on Vehicle | Upper Right |
Weight | 0.750 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023