Important compatibility info
Weight | 1.70 kg |
Function | Brake Shoe Set, parking brake |
Thickness/Strength 1 | 3 mm |
Inspection Tag | ECE R90 Approved |
Outer diameter | 210 mm |
Width | 30 mm |
Placement on Vehicle | Rear Axle |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 59.9 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Weight | 0.02 kg |
Type | Sensor, camshaft position |
Additional Information 2 | with seal ring |
Additional Information
Technical Information
Please note colour of connector
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with mounting sleeve |
Outer diameter | 81 mm |
Width | 11.5 mm |
Material | PTFE (polytetrafluoroethylene) |
Placement on Vehicle | frontal sided |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Weight | 0.058 kg |
Inner diameter | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.4 kg |
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 45 mm |
Outer diameter | 90 mm |
Inner diameter | 49 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Additional Information | with axle nut |
Type | Wheel Bearing Kit |
Weight | 1.150 kg |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (23926)
- 1x Febi Circlip (23927)
- 1x Febi Nut, kingpin (12181)
Important compatibility info
Length | 2142 mm |
Paired article numbers | 104521 |
Number of Connectors / Ports | 2 |
Resistance | 1150 Ohm |
Weight | 0.096 kg |
Cable Length | 1919 mm |
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.885 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 45 mm |
Outer diameter | 80 mm |
Inner diameter | 45 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information 2 | with nut, with screw, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (01891)
- 1x Febi Circlip (04903)
- 1x Febi Nut (01892)
- 1x Febi Bolt, brake disc (01893)
Important compatibility info
Placement on Vehicle | Right Rear |
Length | 1900 mm |
Function | Cable Pull, parking brake |
Weight | 0.95 kg |
Type | Cable Pull, parking brake |
Paired article numbers | 32464 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, automatic transmission |
Weight | 0.62 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Rear |
Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 290 mm |
Weight | 0.412 kg |
Paired article numbers | 38054 |
Rod/Strut | Coupling Rod |
Spanner Size | 19 |
Thickness | 65 mm |
Extra Description | ProKit |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,5 |
Type | Link/Coupling Rod, stabiliser bar |
Material | Aluminium |
Width | 35 mm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (38055)
- 2x Febi Nut, stabiliser bar (22264)
Important compatibility info
Inner diameter 2 | 67 mm |
Inner diameter 1 | 23 mm |
Material | Thermoplastic polyester elastomer |
Placement on Vehicle | transmission sided, Front Axle |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Joint Type | Tripod Joint |
Length | 101 mm |
Weight | 0.192 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (177577)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Switch, tailgate release |
Type | Switch, tailgate release |
Extra Description | febi Plus |
Weight | 0.044 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Spring |
Placement on Vehicle | Rear Axle |
Length | 400 mm |
Outer diameter | 126 mm |
Weight | 1.59 kg |
Type | Suspension Spring |
Wire Diameter | 10.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 705 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Weight | 0.049 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 130 mm |
Function | Suspension Spring |
Length | 266 mm |
Placement on Vehicle | Rear Axle |
Type | Suspension Spring |
Weight | 2.23 kg |
Wire Diameter | 13.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.807 kg |
Height | 400 mm |
Width | 600 mm |
Type | Mudflap |
Function | Mudflap |
Replaces | 03260 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 175123 |
Placement on Vehicle | Rear Axle Right |
Weight | 0.531 kg |
Function | Splash Guard, brake disc |
Type | Splash Guard, brake disc |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | In-Line Filter, without filter heating |
Pipe Diameter | 8 mm. 10 mm |
Function | Fuel filter |
Height | 210 mm |
Weight | 0.450 kg |
Outer diameter | 90 mm |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 175124 |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Weight | 0.531 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Weight | 0.900 kg |
Placement on Vehicle | Rear Axle |
Width | 25 mm |
Outer diameter | 160 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 3.3 mm |
Function | Brake Shoe Set, parking brake |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Accessory Kit, brake shoes (31044)
- 1x Febi Brake Shoe Set, parking brake (10799)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023