Important compatibility info
Weight | 0.150 kg |
Housing length | 207.5 mm |
Function | Gas Spring, boot/cargo area |
Piston conrod diameter | 6 mm |
Mounting points diameter | 13 mm |
Stroke | 158 mm |
Eject Force | 50 N |
Housing Diameter | 16 mm |
Length | 388 mm. 233 mm |
Placement on Vehicle | Left Rear |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Function | Sensor, intake manifold pressure |
Weight | 0.024 kg |
Type | Sensor, intake manifold pressure |
for OE number | 038 906 051 D |
Placement on Vehicle | Charge Air Cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Weight | 0.24 kg |
Opening Temperature | 87 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 451 mm |
Weight | 0.3 kg |
Housing Diameter | 22 mm |
Eject Force | 480 N |
Stroke | 162 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 245 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.441 kg |
Placement on Vehicle | Front Axle |
Length | 314 mm |
Outer diameter | 130 mm |
Function | Suspension Spring |
Wire Diameter | 11 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Placement on Vehicle | Rear Axle |
Height | 20 mm |
Type | Cover Sheet, brake drum |
Outer diameter | 449 mm |
Function | Cover Sheet, brake drum |
Inner diameter | 121 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.242 kg |
Placement on Vehicle | Right |
Material | Metal |
Outer diameter | 70 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.790 kg |
Function | Air Filter |
Inner diameter | 135 mm |
Outer diameter | 263 mm |
Height | 345 mm |
Filter type | Filter Insert |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 332.75 mm |
Weight | 0.728 kg |
Function | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M16 x 1,5 |
Additional Information | with counter nut |
Type | Inner Tie Rod |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 131.8 mm |
Width | 75 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.1 mm |
Wear Warning Contact | incl. wear warning contact |
Weight | 2.345 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.132 kg |
Placement on Vehicle | Front Axle Left |
Number of Connectors / Ports | 1 |
Cable Length | 1080 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Paired article numbers | 185595 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front, Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 52.2 mm |
Thickness | 40 mm |
Additional Information 2 | with bolts/screws |
Inner diameter | 24.5 mm |
Weight | 0.210 kg |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information | with nuts |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (103787)
- 2x Febi Bolt, control arm (174648)
- 1x Febi Nut (10638)
- 1x Febi Screw (40708)
- 1x Febi Nut (15428)
Important compatibility info
Material | Metal |
Outer diameter | 50 mm |
Weight | 0.187 kg |
Width of castor bearing surface | 26 mm |
for OE number | 16 138 384 80 |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Weight | 0.98 kg |
Type | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Type | Suspension Strut Support Mount |
Function | Suspension Strut Support Mount |
Weight | 0.589 kg |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.52 kg |
Length | 66.5 mm |
Material | Rubber/Metal |
Outer diameter | 62.5 mm |
Inner diameter | 15.5 mm |
Placement on Vehicle | Rear Axle, Rear |
Function | Bush Set, axle beam |
Type | Bush Set, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (01691)
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Function | Mounting, control/trailing arm |
Thickness | 51 mm |
Outer diameter | 79 mm |
Material | Aluminium, Rubber/Metal |
Width | 71 mm |
Length | 64 mm |
Weight | 1.02 kg |
Extra Description | ProKit |
Type | Mounting, control/trailing arm |
Additional Information 2 | with bolts/screws |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (30691)
- 2x Febi Screw (37613)
- 1x Febi Screw (39229)
Important compatibility info
Weight | 0.866 kg |
Material | Cast Aluminium |
Number of Teeth | 19 |
Number of Wings | 12 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Additional Information 2 | with seal ring |
for OE number | 13 34 024 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.386 kg |
Type | Gas Spring, boot/cargo area |
Placement on Vehicle | both sides |
Length | 518 mm |
Housing Diameter | 19 mm |
Eject Force | 420 N |
Stroke | 183 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 298 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Rear |
Weight | 0.831 kg |
for OE number | 12363-0M070 |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 197142 |
Weight | 0.180 kg |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, parking brake |
Paired article numbers | 109495 |
Placement on Vehicle | Right Rear |
Length | 1809 mm |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.174 kg |
Function | Gasket Kit, cylinder head |
for OE number | 541 010 16 21 S2 |
Type | Gasket Kit, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (28685)
- 1x Febi Gasket, intake manifold (21911)
- 1x Febi Gasket, exhaust manifold (30615)
- 1x Febi Gasket, cylinder head (39484)
Important compatibility info
Weight | 0.15 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 55590052 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Weight | 0.74 kg |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (02009)
- 1x Febi Rolling Bearing, suspension strut support mount (09015)
- 1x Febi Rubber Buffer, suspension (03100)
Important compatibility info
Weight | 0.127 kg |
Placement on Vehicle | Rear Axle Left |
Length | 2545 mm |
Paired article numbers | 40546 |
Number of Connectors / Ports | 2 |
Resistance | 1200 Ohm |
Cable Length | 2530 mm |
Colour Coding | Grey |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 64 |
Timing Chain Size | G53HP, G53HR |
Function | Chain, oil pump drive |
Additional Information 2 | Requires special tools for mounting |
Type | Chain, oil pump drive |
Weight | 0.176 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.807 kg |
Height | 400 mm |
Width | 600 mm |
Type | Mudflap |
Function | Mudflap |
Replaces | 03260 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.040 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Cable Length | 607 mm |
Type | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 107991 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 182.5 mm |
Placement on Vehicle | both sides |
Eject Force | 600 N |
Stroke | 76 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing Diameter | 19 mm |
Weight | 0.192 kg |
Length | 292 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023