Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.796 kg |
| Placement on Vehicle | Front Axle |
| Length | 144 mm |
| Width | 134.5 mm |
| Material | Rubber/Metal |
| Outer diameter | 86 mm. 97 mm |
| Thickness | 45 mm. 58.5 mm |
| Inner diameter | 15 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, with ball bearing |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.02
Important compatibility info
| Weight | 0.035 kg |
| Length | 68.5 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.02
Important compatibility info
| Weight | 1.465 kg |
| for OE number | 4G0 698 451 H |
| Placement on Vehicle | Rear Axle |
| Length | 116.4 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.3 mm |
| Function | Brake Pad Set, disc brake |
| Width | 60 mm. 58.8 mm |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
Technical Information
If an electronic parking brake (EPB) is fitted a suitable diagnostic device must be used to release and close the brakes during the fitting process.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.03
Important compatibility info
| Weight | 1.5 kg |
| Outer diameter | 114 mm |
| Inner diameter | 110 mm |
| Function | Corrugated Pipe, exhaust system |
| Length | 443 mm |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.03
Important compatibility info
| Weight | 1.424 kg |
| Placement on Vehicle | Rear Axle |
| Length | 140.7 mm. 141.2 mm |
| Width | 53.6 mm. 50.7 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.8 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.03
Important compatibility info
| Outer diameter | 230 mm. 131 mm |
| Thickness | 450 mm |
| Function | Bellow, air suspension |
| Additional Information | without piston |
| Weight | 2.0 kg |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.03
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Inspection Tag | ECE R90 Approved |
| Additional Information 2 | with piston clip |
| Wear Warning Contact | with acoustic wear warning |
| Length | 167.1 mm |
| Width | 62.6 mm |
| Thickness/Strength 1 | 17.6 mm |
| Weight | 2.016 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.03
Important compatibility info
| Weight | 1.231 kg |
| Placement on Vehicle | Front Axle |
| Length | 122.8 mm |
| Width | 51.6 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Manufacturer | FIAT FORD |
| Model | 500C KA PANDA |
| Additional Information 2 | with anti-squeak plate, with brake caliper screws, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.04
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 52 |
| Function | Chain, oil pump drive |
| Weight | 0.094 kg |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.04
Important compatibility info
| Length | 2220 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Weight | 0.385 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.05
Important compatibility info
| Extra Description | febi Plus |
| Type | Clock Spring, airbag |
| Weight | 0.140 kg |
| Number of Connectors / Ports | 5. 2 |
| Function | Clock Spring, airbag |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.05
Important compatibility info
| Weight | 0.750 kg |
| Length | 2176 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.05
Important compatibility info
| Paired article numbers | 40141 |
| Function | Tie Rod |
| Placement on Vehicle | Front Axle Left |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Additional Information | with lock nut |
| Weight | 1.282 kg |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (31523)
- 1x Febi Tie Rod End (39955)
£27.05
Important compatibility info
| Weight | 0.53 kg |
| Thickness | 44 mm |
| Inner diameter | 12 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Additional Information 2 | with ball bearing, with fastening material |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (28222)
- 1x Febi Nut (38060)
- 1x Febi Nut (38059)
£27.05
Important compatibility info
| Outer diameter | 80 mm |
| Width | 21.5 mm |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
| Weight | 0.38 kg |
| Inner diameter | 50 mm |
| Bearing Type | Tapered Roller Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.05
Important compatibility info
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Function | Tie Rod |
| Paired article numbers | 40140 |
| Placement on Vehicle | Front Axle Right |
| Weight | 1.282 kg |
| Additional Information | with lock nut |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (31523)
- 1x Febi Tie Rod End (39956)
£27.05
Important compatibility info
| Additional Information 2 | with piston clip |
| Weight | 2.16 kg |
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm. 155.2 mm |
| Width | 71.5 mm. 69 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| for OE number | 77364929 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.05
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 79 °C |
| Type | Thermostat, coolant |
| Weight | 0.111 kg |
| Additional Information 2 | with seal ring |
| Outer diameter | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.06
Important compatibility info
| Weight | 0.68 kg |
| Placement on Vehicle | Rear Axle |
| Length | 61.8 mm |
| Width | 56.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Thickness/Strength 1 | 15 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.06
Important compatibility info
| Inner diameter | 15 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Weight | 0.616 kg |
| Width | 29 mm |
| Outer diameter | 135 mm |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.06
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Length | 137 mm |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | incl. wear warning contact |
| Width | 57.5 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 1.873 kg |
| Thickness/Strength 1 | 19 mm |
| Number of wear indicators | 2 Per Axle |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.06
Important compatibility info
| Weight | 1.033 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,5 |
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Control Arm |
| Placement on Vehicle | Lower, Front, Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.06
Important compatibility info
| Weight | 1.427 kg |
| Hole Spacing | 115 mm |
| Placement on Vehicle | Front Axle, Upper, Right |
| Length | 147 mm |
| Outer diameter | 67 mm |
| Thickness | 24 mm |
| Steering arm type | for trailing arm |
| Mounting points diameter | 17 mm |
| Type | Repair Kit, control/trailing arm |
| Function | Repair Kit, control/trailing arm |
| Additional Information 2 | with spacer disc, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.06
Important compatibility info
| Cable Length | 2244 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1800 Ohm |
| Weight | 0.154 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.06
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 27 |
| Internal Teeth, wheel side | 36 |
| Weight | 3.034 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.07
Important compatibility info
| Length | 521 mm |
| Housing Diameter | 18 mm |
| Eject Force | 535 N |
| Stroke | 153 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 303.5 mm |
| Weight | 0.25 kg |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.07
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 145 mm |
| Thread Length | 107 mm |
| Weight | 1.55 kg |
| External Thread Size | M20 x 1,5 |
| Cone Size | 28.9 mm |
| Internal Thread Size | M30 x 1,5 |
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Additional Information | with threaded sleeve, with crown nut and split pin, with sleeve |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (34103)
£27.07
Important compatibility info
| Wire Diameter | 12.5 mm |
| Outer diameter | 117 mm. 80 mm |
| Length | 368 mm |
| Weight | 2.26 kg |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.07
Important compatibility info
| Weight | 0.140 kg |
| Length | 265 mm |
| Housing length | 149.5 mm |
| Placement on Vehicle | both sides |
| Eject Force | 325 N |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Mounting points diameter | 16.5 mm |
| Stroke | 84 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.07
Important compatibility info
| Placement on Vehicle | Upper, Lower |
| Function | Holder, engine mounting system |
| Weight | 0.433 kg |
| Type | Holder, engine mounting system |
| for OE number | 5Q0 198 037 A |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.07
Important compatibility info
| Weight | 1.58 kg |
| Function | Oil sump |
| Type | Oil sump |
| Additional Information | without oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Weight | 2.0 kg |
| Placement on Vehicle | Rear Axle, Front Axle |
| Type | Repair Kit, brake caliper |
| Function | Repair Kit, brake caliper |
| for OE number | 0865 966 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Housing length | 293.5 mm |
| Housing Diameter | 19 mm |
| Eject Force | 445 N |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Stroke | 224 mm |
| Mounting points diameter | 18 mm |
| Weight | 0.25 kg |
| Length | 556 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Weight | 0.44 kg |
| Type | Sensor, crankshaft pulse |
| Length | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Spanner Size | 22 |
| Number of Connectors / Ports | 3 |
| Switch Point | 91 °C. 99 °C |
| Colour Coding | White |
| Weight | 0.046 kg |
| External Thread Size | M14 x 1,5 |
| Function | Temperature Switch, radiator fan |
| Type | Temperature Switch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Weight | 1.037 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 10589 |
| Colour | Black |
| Function | Tie Rod |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (32157)
- 1x Febi Tie Rod End (10888)
£27.08
Important compatibility info
| Weight | 0.223 kg |
| Placement on Vehicle | both sides |
| Length | 450 mm |
| Housing Diameter | 18 mm |
| Eject Force | 385 N |
| Stroke | 168 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 250.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Weight | 0.47 kg |
| Number of Teeth | 36 |
| Engine Management | Timing Chain |
| Function | Gear/Sprocket, camshaft |
| Type | Gear/Sprocket, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Weight | 0.4 kg |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Length | 170 mm |
| Quality/ Grade | 10.9 |
| External Thread Size | M12 x 1,75 |
| Weight | 1.96 kg |
| Function | Cylinder Head Bolt Set |
| Screw length below head | 157 mm |
| Type | Cylinder Head Bolt Set |
| Number of screws | 14 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 14x Febi Cylinder Head Bolt (14799)
£27.08
Important compatibility info
| Material | ACM (Polyacrylate) |
| Weight | 0.06 kg |
| for OE number | 11 12 8 583 293 |
| Type | Gasket Set, cylinder head cover |
| Function | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Weight | 0.22 kg |
| Outer diameter | 30 mm |
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Housing Type | with housing |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 192 mm |
| Inner diameter | 174 mm |
| Function | Sensor Ring, ABS |
| Number of Teeth, ABS ring | 100 |
| Type | Sensor Ring, ABS |
| Weight | 0.417 kg |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Additional Information 2 | with mounting sleeve |
| Outer diameter | 81 mm |
| Width | 11.5 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Placement on Vehicle | frontal sided |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Weight | 0.058 kg |
| Inner diameter | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Weight | 0.28 kg |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Material | Metal |
| Outer diameter | 70 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Weight | 0.42 kg |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Weight | 0.097 kg |
| Placement on Vehicle | Rear Axle Right |
| Length | 2140 mm |
| Paired article numbers | 104748 |
| Cable Length | 1918 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| for OE number | 39310-02600 |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Weight | 0.120 kg |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Length | 144 mm |
| Height | 66 mm |
| Weight | 0.150 kg |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
| Width | 140 mm |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Forward- /Backflow | Supply Line |
| Material | Metal |
| Spanner Size | 17 |
| Weight | 0.168 kg |
| Type | Oil Line, charger |
| Number of Connectors / Ports | 2 |
| Function | Oil Line, charger |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023