Important compatibility info
Material | Rubber/Metal |
Placement on Vehicle | Front, Rear Axle Left, Rear Axle Right |
Outer diameter | 95.5 mm |
Thickness | 88 mm |
Inner diameter | 21.2 mm |
Weight | 0.448 kg |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.240 kg |
Function | Thermostat, coolant |
Opening Temperature | 87 °C |
Thickness | 85 mm |
Outer diameter 2 | 66 mm |
Seal Material | NBR (nitrile butadiene rubber) |
Outer diameter 1 | 43 mm |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
for OE number | 111 200 09 15 |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Weight | 1.700 kg |
Internal Teeth, wheel side | 25 |
Thread Size | M24x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.066 kg |
Placement on Vehicle | Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 864 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Paired article numbers | 174560 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.101 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, speed |
Screw length below head | 55 mm |
External Thread Size | M18 |
Type | Sensor, speed |
for OE number | 012 542 56 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PE (Polyethylene) |
Inner diameter | 56 mm |
Weight | 0.326 kg |
Type | Charge Air Hose |
Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Right, Front Axle Left |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
ABS Ring Diameter | 81 mm |
Number of Teeth, ABS ring | 45 |
Weight | 2.426 kg |
Internal Teeth, wheel side | 27 |
External Teeth, Wheel Side | 33 |
Thread Size | M14x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Type | Knock Sensor |
Function | Knock Sensor |
Length | 340 mm |
Colour | Brown |
Weight | 0.69 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Cable Length | 1070 mm |
Function | Sensor, wheel speed |
Weight | 0.130 kg |
Placement on Vehicle | Front Axle Right |
Type | Sensor, wheel speed |
Paired article numbers | 175244 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.37 kg |
Outer diameter | 65 mm |
Placement on Vehicle | Charge Air Cooler, Right |
Inner diameter | 53 mm |
Function | Charge Air Hose |
Turbocharger line | Turbocharger to charge air cooler |
Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.772 kg |
Material | Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Type | with right-hand thread |
Cone Size | 26 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 180 mm |
Weight | 1.6 kg |
Function | Tie Rod End |
Internal Thread Size | M30 x 1,5 |
External Thread Size | M20 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with crown nut and split pin, with threaded sleeve, with sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (39389)
Important compatibility info
Paired article numbers | 12027 |
Weight | 0.831 kg |
Material | Rubber/Metal |
Replaces | 37921 |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (12029)
- 1x Febi Rolling Bearing, suspension strut support mount (12030)
Important compatibility info
Weight | 0.934 kg |
Material | Cast Aluminium |
Number of Teeth | 18 |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 142 mm |
Width | 59 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.3 mm |
Function | Brake Pad Set, disc brake |
Model | QASHQAI X-TRAIL |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Weight | 1.63 kg |
Manufacturer | NISSAN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 155.2 mm |
Width | 64 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.3 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Weight | 1.801 kg |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.262 kg |
Placement on Vehicle | Rear Axle Left |
Length | 185 mm |
Operating Mode | Manual |
Paired article numbers | 03587 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.05 kg |
Number of Connectors / Ports | 3 |
Switch Point | 91 °C. 99 °C |
Colour Coding | Black |
Type | Temperature Switch, radiator fan |
Function | Temperature Switch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.896 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with screw, with nut |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (21840)
- 1x Febi Inner Tie Rod (31496)
- 1x Febi Nut (39908)
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 79 °C |
Type | Thermostat, coolant |
Weight | 0.111 kg |
Additional Information 2 | with seal ring |
Outer diameter | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023