Important compatibility info
Weight | 0.839 kg |
Additional Information 2 | with seal ring |
Material | Cast Aluminium |
Number of Teeth | 23 |
Number of Wings | 8 |
Water pump impeller material | Metal |
Function | Water Pump, engine cooling |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner Brake Drum Diameter | 180 mm |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Rear Axle |
Width | 30 mm |
Outer diameter | 211.5 mm |
Thickness | 74.5 mm |
Bolt Hole Circle Diameter | 100 mm |
Function | Brake Drum |
Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Outer diameter | 57 mm |
Inner diameter | 8.2 mm |
Weight | 0.293 kg |
Type | Deflection Pulley/Guide Pulley, timing belt |
Function | Deflection Pulley/Guide Pulley, timing belt |
Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.265 kg |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
Length | 4400 mm |
Number of Connectors / Ports | 2 |
Resistance | 1200 Ohm |
Cable Length | 4280 mm |
Type | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Seal Diameter | 100 mm |
Height | 195 mm |
Function | Fuel filter |
Weight | 0.253 kg |
Inner diameter | 45 mm |
Type | Fuel filter |
Outer diameter | 95 mm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 12.5 mm |
Weight | 1.94 kg |
Placement on Vehicle | Front Axle |
Length | 328 mm |
Outer diameter | 169 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 16.5 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 6 mm |
Eject Force | 235 N |
Stroke | 47 mm |
Weight | 0.2 kg |
Length | 165 mm |
Housing Diameter | 15 mm |
Placement on Vehicle | both sides |
Housing length | 98.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.47 kg |
Extra Description | ProKit |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
External Thread Size | M12 x 1,25 |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M22 x 1,5 |
Weight | 1.67 kg |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 147 mm |
Outer diameter | 80 mm |
External Teeth, Wheel Side | 22 |
Seal Diameter | 69 mm |
Internal Teeth, wheel side | 22 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | In-Line Filter |
Function | Filter, venting (fuel tank) |
Weight | 0.045 kg |
Length | 156 mm |
Outer diameter | 47.5 mm |
Pipe Diameter | 6 mm |
Type | Filter, venting (fuel tank) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.77 kg |
Placement on Vehicle | Front Axle |
Length | 360 mm |
Outer diameter | 133 mm |
Function | Suspension Spring |
Wire Diameter | 11.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Number of Connectors / Ports | 2 |
Type | Sensor, coolant temperature |
Function | Sensor, coolant temperature |
Weight | 0.087 kg |
for OE number | 3985651 |
Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.982 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
for OE number | 204 320 12 73 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.86 kg |
Placement on Vehicle | Front Axle |
Bearing/Mounting Type | Rubber-Metal Mount |
Material | Rubber/Metal |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.545 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Steering arm type | Control Arm |
Rod/Strut | Guide Rod |
Function | Control/Trailing Arm, wheel suspension |
for OE number | 220 350 24 06 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 7 |
Weight | 0.196 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Track rollers material | Plastic |
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 75 mm |
Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Cone Size | 19.5 mm |
Weight | 1.25 kg |
Steering arm type | for control arm |
Mounting points diameter | 12 mm |
Type | Ball Joint |
Function | Ball Joint |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.192 kg |
Type | Splash Guard, brake disc |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 175136 |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.074 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 106319 |
Number of Connectors / Ports | 2 |
Cable Length | 855 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.690 kg |
Placement on Vehicle | Left Rear, Right Rear |
Length | 1994 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.95 kg |
Placement on Vehicle | Front Axle |
Length | 155.3 mm |
Width | 68.5 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.8 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 170526 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.95 kg |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.91 kg |
Wire Diameter | 11.5 mm |
Placement on Vehicle | Rear Axle |
Length | 357 mm |
Outer diameter | 111 mm. 79 mm |
Function | Suspension Spring |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 1.0 kg |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 7599694 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Material | Rubber/Metal |
Placement on Vehicle | Right Rear |
Weight | 1.56 kg |
Type | Mounting, engine |
for OE number | 1H0 199 262 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.315 kg |
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Rear Axle |
Length | 114.2 mm |
Width | 73 mm |
Thickness/Strength 1 | 15.3 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.739 kg |
Material | Cast Aluminium |
Number of Teeth | 21 |
Number of Wings | 20 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.72 kg |
Placement on Vehicle | Front Axle |
Length | 124.6 mm |
Width | 70.6 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.3 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Rod/Strut | Coupling Rod |
Weight | 1.200 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (21357)
- 1x Febi Link/Coupling Rod, stabiliser bar (21358)
- 2x Febi Screw (22248)
- 4x Febi Nut (06877)
Important compatibility info
Function | Oil Separator, crankcase ventilation |
Weight | 0.167 kg |
Extra Description | febi Plus |
for OE number | 611 016 03 34 |
Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 503 mm |
Function | Brake Hose |
Type | Brake Hose |
Weight | 0.09 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Weight | 1.820 kg |
Inner diameter | 103 mm |
Outer diameter | 213 mm |
Height | 221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Rear |
Weight | 0.942 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 31277314 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Weight | 0.072 kg |
Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | Tripod Joint |
Weight | 0.098 kg |
Inner diameter 2 | 61 mm |
Inner diameter 1 | 22 mm |
Material | Thermoplast |
Length | 104 mm |
Placement on Vehicle | transmission sided, Front Axle |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Bellow Kit, drive shaft (176045)
Important compatibility info
Length | 3648 mm |
Paired article numbers | 104544 |
Weight | 0.148 kg |
Placement on Vehicle | Rear Axle Right |
Number of Connectors / Ports | 2 |
Resistance | 1150 Ohm |
Cable Length | 3588 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 10 mm |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Thickness | 32 mm |
Material | Cast Aluminium |
Length | 170 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.304 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with bolts/screws, with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (39895)
- 1x Febi Screw (37265)
- 1x Febi Screw (38298)
- 1x Febi Nut (22263)
Important compatibility info
Function | Valve, crankcase ventilation |
Type | Valve, crankcase ventilation |
Extra Description | febi Plus |
Weight | 0.270 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Colour | White |
Weight | 0.071 kg |
Function | Resistor, interior blower |
Extra Description | febi Plus |
Type | Resistor, interior blower |
for OE number | 701 959 263 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Number of Connectors / Ports | 2 |
Weight | 0.02 kg |
Type | Sensor, coolant temperature |
Function | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Adjustable | Adjustable |
External Thread Size | M12 x 1,5 |
Type | Tie Rod |
Function | Tie Rod |
Colour | Green |
Driver Position | for right-hand drive vehicles |
Weight | 0.998 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 7 |
Outer diameter | 68.7 mm |
Additional Information 2 | with lid |
Inner diameter | 17 mm |
Weight | 0.738 kg |
Type | Alternator Freewheel Clutch |
Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.355 kg |
Width of castor bearing surface | 29.50 mm |
Material | Metal |
Outer diameter | 80 mm |
Number of Ribs | 7 |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.30 kg |
Number of Connectors / Ports | 2 |
Width | 14.2 mm |
Outer diameter | 88 mm |
Thickness | 28 mm |
Inner diameter | 52 mm |
Function | Central Magnet, camshaft adjustment |
Extra Description | febi Plus |
Type | Central Magnet, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.32 kg |
Inner diameter | 25 mm |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (08510)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 169 mm |
Spanner Size | 46 |
Weight | 1.040 kg |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 12.5 mm |
Outer diameter | 117 mm. 80 mm |
Length | 368 mm |
Weight | 2.26 kg |
Placement on Vehicle | Rear Axle |
Function | Suspension Spring |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Tie Rod End |
Function | Tie Rod End |
Spanner Size | 23 |
Additional Information | with lock nut |
Weight | 0.522 kg |
Paired article numbers | 183437 |
External Thread Size | M12 x 1,5 |
Internal Thread Size | M16 x 1,5 |
Length | 197 mm |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 23 |
Paired article numbers | 183436 |
Function | Tie Rod End |
Weight | 0.522 kg |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M12 x 1,5 |
Length | 197 mm |
Placement on Vehicle | Front Axle Left |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 187 mm |
Outer diameter | 160 mm |
Additional Information 2 | with pre-filter |
Inner diameter | 78 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Weight | 0.357 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023