Important compatibility info
Weight | 1.23 kg |
Paired article numbers | 39042 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with clamps, with steering bellow |
Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (19935)
- 1x Febi Tie Rod End (10660)
- 1x Febi Bellow, steering (29206)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | both sides |
Length | 485 mm |
Weight | 0.2 kg |
Housing Diameter | 19 mm |
Eject Force | 645 N |
Stroke | 152 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 257 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.110 kg |
Length | 79.85 mm |
Outer diameter | 15.48 mm |
Function | Repair Kit, tilt pump |
Type | Repair Kit, tilt pump |
Inner diameter | 13.33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 45 mm |
Outer diameter | 72 mm |
Inner diameter | 32 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 1.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173057)
- 1x Febi Circlip (173802)
- 1x Febi Shaft Seal, wheel bearing (173803)
Important compatibility info
Placement on Vehicle | Front |
Length | 1908 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 12 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1890 mm |
Weight | 0.376 kg |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 32 mm |
Outer diameter | 230 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 5 mm |
Type | Brake Shoe Set |
Function | Brake Shoe Set |
Weight | 1.85 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.77 kg |
Paired article numbers | 104216 |
Function | Repair Kit, suspension strut support mount |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Right |
Length | 131 mm |
Type | Repair Kit, suspension strut support mount |
Height | 65 mm |
Width | 119 mm |
Additional Information 2 | with ball bearing |
Inner diameter | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 91 °C |
Function | Thermostat, coolant |
Weight | 0.213 kg |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.640 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 1827.22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.133 kg |
Chain Type | Simplex, with chain lock |
Number of Chain Links | 60 |
Function | Chain Kit, oil pump drive |
Type | Chain Kit, oil pump drive |
Timing Chain Size | G44HCF |
Wet Boiling Point | 50 °C |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33896)
- 1x Febi Tensioner Guide, oil pump drive chain (44609)
Important compatibility info
Weight | 0.4 kg |
Material | Plastic |
Outer diameter | 70 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information | with holder |
Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.103 kg |
Material | Plastic |
Length | 252 mm |
Engine Management | Timing Chain |
Function | Guide, timing chain |
Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.69 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 1 699 249 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.075 kg |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 171104 |
Number of Connectors / Ports | 2 |
Cable Length | 1535 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.140 kg |
Outer diameter | 73.7 mm |
Material | Plastic |
Number of Ribs | 6 |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information 2 | with screw |
Type | Deflection/Guide Pulley, v-ribbed belt |
Mounting points diameter | 8 mm |
Inner diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 109418 |
Number of Connectors / Ports | 2 |
Cable Length | 590 mm |
Function | Sensor, wheel speed |
Weight | 0.088 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.11 kg |
Length | 72 mm |
Width | 100 mm |
Thickness | 100 mm |
Function | Coolant Control Valve |
for OE number | 1J0 819 809 |
Extra Description | febi Plus |
Type | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 26.5 mm |
Material | Plastic |
Outer diameter | 81 mm |
Number of Ribs | 6 |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 22 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.235 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | End Outline Marker Light |
Light Design | LED |
Mounting bores distance | 78 mm |
Cable Length | 500 mm |
Inspection Tag | EMC |
Length | 173 mm |
Placement on Vehicle | Left |
Protection Type (IP Code) | IP67 |
Voltage from | 12 V |
Voltage to | 24 V |
Function | End Outline Marker Light |
Fulfils ECE norm | R10, R7, R91 |
Port / Connector type | PRS |
Weight | 0.195 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023