Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.36 kg |
| Height | 57 mm |
| Outer diameter | 63 mm |
| Filter type | Pollen Filter |
| Type | Filter Set, cabin air |
| Function | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.51
Important compatibility info
| ABS Ring Diameter | 90 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left |
| Number of Teeth, ABS ring | 48 |
| Weight | 2.168 kg |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.51
Important compatibility info
| Type | Air Filter |
| Placement on Vehicle | Front, Right |
| Length | 306 mm |
| Height | 97 mm |
| Width | 193 mm |
| Filter type | Filter Insert |
| Paired article numbers | 49667 |
| Function | Air Filter |
| Weight | 0.61 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.51
Important compatibility info
| Inner diameter | 45 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with axle nut |
| Outer diameter | 83 mm |
| Width | 44 mm |
| Weight | 0.99 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.51
Important compatibility info
| Weight | 0.235 kg |
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.51
Important compatibility info
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 177008 |
| Cable Length | 5510 mm |
| Resistance | 1185 Ohm |
| Number of Connectors / Ports | 2 |
| Weight | 0.197 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.51
Important compatibility info
| Weight | 0.22 kg |
| Placement on Vehicle | Outer, Rear, Rear Axle Left, Lower, Rear Axle Right |
| Outer diameter | 40 mm |
| Thickness | 50 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.52
Important compatibility info
| Placement on Vehicle | Centre |
| Length | 204 mm |
| Thickness | 120 mm |
| Function | Suspension, propshaft |
| Weight | 0.32 kg |
| Width | 45 mm |
| Type | Suspension, propshaft |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.52
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Sheet Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 181138 |
| Weight | 1.049 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.52
Important compatibility info
| Weight | 0.480 kg |
| Placement on Vehicle | Front Axle |
| Length | 219 mm |
| Width | 105 mm |
| Material | PU (Polyurethane), Rubber |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.53
Important compatibility info
| Placement on Vehicle | Upper, Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 0.53 kg |
| Type | Mounting, engine |
| for OE number | 3C0 199 867 E S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, engine (38401)
- 1x Febi Holder, engine mounting system (38402)
£28.54
Important compatibility info
| Function | Suspension Spring |
| Type | Suspension Spring |
| Weight | 1.82 kg |
| Outer diameter | 111 mm |
| Length | 351 mm |
| Placement on Vehicle | Rear Axle |
| Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.54
Important compatibility info
| Weight | 0.8 kg |
| Placement on Vehicle | Front Axle |
| Length | 146 mm |
| Width | 142 mm |
| Material | Rubber/Metal |
| Outer diameter | 87 mm |
| Inner diameter | 35 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Height | 28 mm |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.54
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Weight | 0.2 kg |
| Paired article numbers | 181347 |
| Length | 507 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.54
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| Weight | 0.481 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.54
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| External Teeth, Wheel Side | 26 |
| Internal Teeth, wheel side | 28 |
| Weight | 1.888 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Function | Air Filter |
| Weight | 2.708 kg |
| Filter type | Filter Insert |
| Outer diameter | 227 mm |
| Inner diameter | 117 mm |
| Height | 370 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Outer diameter | 60 mm |
| Material | Metal |
| Weight | 0.35 kg |
| Type | Tensioner Pulley, timing belt |
| Function | Tensioner Pulley, timing belt |
| Width | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Weight | 0.53 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 143 mm |
| Width | 40 mm |
| Thickness | 75 mm |
| Spanner Size | 19 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Length | 2643 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Weight | 0.311 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023