Important compatibility info
Outer diameter 2 | 56 mm |
Outer diameter 1 | 65 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Type | Brake Disc |
Minimum thickness | 27.75 mm |
Centering Diameter | 215 mm |
Height | 134 mm |
Outer diameter | 322 mm |
Function | Brake Disc |
Brake Disc Thickness | 30 mm |
Brake Disc Type | Vented |
Number of Holes | 10 |
Important compatibility info
Length | 634 mm |
External Teeth, Wheel Side | 29 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Drive Shaft |
Function | Drive Shaft |
External Teeth, Diff.Side | 27 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1506)
Important compatibility info
Water pump impeller material | Plastic |
Water Pump Pulley Diameter | 98 mm |
Impeller Diameter | 62 mm |
Number of Ribs | 7 |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Rear |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6928 |
Important compatibility info
Length | 179 mm |
Height | 110 mm |
Thickness | 50 mm |
Number of Holes | 2 |
Function | Suspension, propshaft |
for centre hole diameter of | 30 mm |
Type | Suspension, propshaft |
Replaces | BPB1012 |
Important compatibility info
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Upper Right |
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower, Rear |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6927 |
Important compatibility info
Length 2 | 754 mm |
Length 3 | 1127 mm |
Length 4 | 1059 mm |
Length 1 | 813 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Important compatibility info
Length | 634 mm |
External Teeth, Wheel Side | 25 |
Type | Drive Shaft |
External Teeth, Diff.Side | 24 |
Placement on Vehicle | Front Axle Left |
Function | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1208)
Important compatibility info
Type | Clutch Kit |
Hub Profile | 18.7 x 16.6 |
Outer diameter | 215 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Replaces | HK2502; HK2329 |
Number of Parts | 2 -part |
Number of Teeth | 22 |
Important compatibility info
Hub Profile | 24.6 x 21.3 |
Outer diameter | 240 mm |
Function | Clutch Kit |
Number of Teeth | 21 |
Number of Parts | 2 -part |
Type | Clutch Kit |
Important compatibility info
Valve type | Flow Restriction Valve |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Operating Mode | Vacuum-controlled |
Important compatibility info
Number of Teeth | 17 |
Hub Profile | 19.8 x 16.9 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Parts | 3 -part |
Important compatibility info
Type | Brake Disc Rotor |
Outer diameter | 305 mm |
Brake Disc Thickness | 28 mm |
Height | 51 mm |
Quantity Unit | Set |
Rotor Style | Vented |
Placement on Vehicle | Front Axle |
Function | Brake Disc |
Centering Diameter | 67 mm |
Minimum thickness | 25.4 mm |
Number of Holes | 5 |
Surface | Coated |
Number of mounting bores | 1 |
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 25 mm |
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Brake Disc |
Centering Diameter | 30 mm |
Minimum thickness | 9.5 mm |
Outer diameter | 290 mm |
Number of Holes | 5 |
Additional Information 2 | with groove, with ABS sensor ring, with wheel bearing |
Height | 90.2 mm |
Type | Brake Disc Rotor |
Rotor Style | Solid |
Brake Disc Thickness | 11 mm |
Quantity | 1 |
Surface | Coated |
Important compatibility info
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Replaced by | BWP2242 |
Important compatibility info
Number of Holes | 5 |
Function | Brake Disc |
Rotor Style | Vented |
Placement on Vehicle | Front Axle |
Centering Diameter | 67 mm |
Surface | Coated |
Brake Disc Thickness | 36 mm |
Minimum thickness | 33.4 mm |
Outer diameter | 375 mm |
Type | Brake Disc Rotor |
Height | 60 mm |
Number of mounting bores | 3 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023