Important compatibility info
Placement on Vehicle | Rear Axle |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | Vented |
Number of Holes | 5 |
Minimum thickness | 18 mm |
Centering Diameter | 69 mm |
Surface | Coated |
Quantity Unit | Set |
Brake Disc Thickness | 20 mm |
Outer diameter | 325 mm |
Height | 34.8 mm |
Number of mounting bores | 2 |
Important compatibility info
Pipe Diameter | 42 mm |
Rod/Strut | Push Rod |
Thread Measurement 2 | M20X1.5 |
Length | 789 mm |
Type | Centre Rod Assembly |
Thread Measurement 1 | M30X1.5 RHT |
for OE number | 9704600905 |
Function | Centre Rod Assembly |
Important compatibility info
Function | Centre Rod Assembly |
Rod/Strut | Push Rod |
Length | 720 mm |
Type | Centre Rod Assembly |
Thread Measurement 2 | M24X1.5 |
Thread Measurement 1 | M30X1.5 RHT |
Pipe Diameter | 36 mm |
Important compatibility info
Function | Centre Rod Assembly |
Thread Measurement 1 | M30X1.5 RHT |
Length | 863 mm |
Type | Centre Rod Assembly |
Pipe Diameter | 42 mm |
Rod/Strut | Push Rod |
Thread Measurement 2 | M24X1.5 |
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 25 mm |
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 24 mm |
Important compatibility info
Length | 900 mm |
Thread Measurement 1 | M30X1.5 RHT |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Pipe Diameter | 48 mm |
Thread Measurement 2 | M24X1.5 |
Rod/Strut | Push Rod |
Important compatibility info
Operating Mode | electronically controlled |
Additional Information | with gaskets/seals |
Additional Information 2 | with sensor |
Housing Type | two-piece housing |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Opening Temperature | 102 °C |
Important compatibility info
Function | Cable Pull, manual transmission |
Length 1 | 1200 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Replaced by | BWP2366 |
Impeller Diameter | 59 mm |
Additional Information | with gaskets/seals |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Important compatibility info
Length | 620 mm |
External Teeth, Wheel Side | 33 |
Placement on Vehicle | Front Axle Right |
Type | Drive Shaft |
Function | Drive Shaft |
Number of Teeth, ABS ring | 45 |
Diameter 2 | 130 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1238)
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 24 mm |
Important compatibility info
Type | Auxiliary water pump (cooling water circuit) |
Function | Auxiliary water pump (cooling water circuit) |
Voltage | 12 V |
Port / Connector type | 3 PIN |
Connector Shape | Oval |
Important compatibility info
Housing Type | with housing |
Additional Information | with gaskets/seals |
Function | Thermostat, coolant |
Opening Temperature | 103 °C |
Type | Thermostat, coolant |
Important compatibility info
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6745 |
Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
Number of Parts | 2 -part |
Hub Profile | 23 x 20 |
Outer diameter | 239 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Number of Teeth | 20 |
Type | Clutch Kit |
Important compatibility info
Housing material | Cast Iron |
Number of Teeth | 28 |
Water Pump Pulley Diameter | 50 mm |
Function | Water Pump, engine cooling |
Housing Type | with housing |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Function | Drive Shaft |
Diameter 2 | 108 mm |
Type | Drive Shaft |
External Teeth, Wheel Side | 36 |
Length | 472 mm |
Important compatibility info
Surface | Coated |
Number of mounting bores | 2 |
Rotor Style | Vented |
Number of Holes | 5 |
Height | 49.2 mm |
Outer diameter | 305 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 25 mm |
Centering Diameter | 62 mm |
Quantity Unit | Set |
Function | Brake Disc |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023