Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information | with gasket/seal |
| Filter type | Screen Filter |
| Additional Information 2 | with seal ring, with bolts/screws |
| Seal Material | ACM (Polyacrylate) |
| Weight | 0.336 kg |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (09463)
- 1x Febi Gasket, automatic transmission oil sump (10072)
- 6x Febi Bolt, automatic transmission oil tray (46395)
- 1x Febi Gasket, automatic transmission oil sump (47393)
- 1x Febi Screw Plug, oil sump (46267)
- 1x Febi Plug-in housing, automatic transmission (control unit) (36332)
- 1x Febi Locking Pin, auto. trans. dipstick sealing piece (44204)
£30.49
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 680 mm |
| Weight | 0.125 kg |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Weight | 1.017 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Internal Teeth, wheel side | 24 |
| Function | Joint Kit, drive shaft |
| Seal Diameter | 58 mm |
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle |
| External Teeth, Wheel Side | 26 |
| Weight | 2.120 kg |
| Number of Teeth, ABS ring | 48 |
| Length | 150 mm |
| Outer diameter | 58 mm |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Length | 870 mm |
| Weight | 0.069 kg |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Weight | 0.53 kg |
| Additional Information 2 | with lid |
| Width | 23 mm |
| Outer diameter | 55.5 mm. 61 mm |
| Number of Ribs | 6 |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| Internal Teeth, wheel side | 21 |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 1.686 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Weight | 0.19 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 54 |
| Function | Chain Kit, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Type | Chain Kit, oil pump drive |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (40394)
- 1x Febi Chain Tensioner, oil pump drive (107836)
£30.49
Important compatibility info
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| External Teeth, Wheel Side | 30 |
| Thread Size | M24x1,5 |
| Type | Joint Kit, drive shaft |
| Weight | 2.230 kg |
| Internal Teeth, wheel side | 24 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| External Thread Size | M8 x 1,25 |
| Weight | 1.129 kg |
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Width of castor bearing surface | 25 mm |
| Material | Metal |
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Weight | 0.594 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 485 mm |
| Paired article numbers | 184028 |
| Weight | 0.440 kg |
| Type | Brake Hose |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Weight | 0.495 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Radiator Hose |
| Inner diameter 1 | 24 mm |
| Additional Information 2 | with clamps |
| Inner diameter 2 | 32 mm |
| Cooling Hose | from engine to engine cooler |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Weight | 0.045 kg |
| Number of Connectors / Ports | 3 |
| Function | RPM Sensor, automatic transmission |
| Type | RPM Sensor, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Weight | 1.44 kg |
| Bearing Type | Tapered Roller Bearing |
| Width | 54 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 90 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 55 mm |
| Replaces | 44776 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Weight | 0.14 kg |
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | transmission sided |
| Outer diameter | 185 mm |
| Thickness | 13 mm |
| Inner diameter | 135 mm. 145 mm |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Additional Information | with bush |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 3555 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Resistance | 1185 Ohm |
| Weight | 0.210 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.51
Important compatibility info
| Brake caliper piston diameter | 52 mm |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178764 |
| Weight | 2.27 kg |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.51
Important compatibility info
| Width | 18 mm |
| Number of Teeth | 120 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt Kit |
| Weight | 0.897 kg |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (12661)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (02558)
£30.51
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.760 kg |
| Placement on Vehicle | Front Axle |
| External Thread Size | M8 x 1,5 |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (19675)
- 1x Febi Rolling Bearing, suspension strut support mount (19924)
£30.52
Important compatibility info
| Weight | 0.407 kg |
| Placement on Vehicle | Front |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (21325)
£30.52
Important compatibility info
| Weight | 0.2 kg |
| Width | 26 mm |
| Material | Plastic |
| Outer diameter | 81.3 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 22.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Outer diameter | 154 mm |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 394 mm |
| Wire Diameter | 12.5 mm |
| Weight | 1.89 kg |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Cooling Hose | from expansion tank to ventilation pipe |
| Function | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.107 kg |
| Type | Radiator Hose |
| Hose Length | 670 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Suspension Spring |
| Length | 187 mm |
| Outer diameter | 144 mm |
| Wire Diameter | 16 mm |
| Type | Suspension Spring |
| Weight | 3.13 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Function | Suspension Spring |
| Outer diameter | 168 mm |
| Number of Coils | 4.6 |
| Length | 376 mm |
| Placement on Vehicle | Front Axle |
| Weight | 2.55 kg |
| Type | Suspension Spring |
| Wire Diameter | 13.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Placement on Vehicle | Left Front, Upper, Lower |
| Weight | 0.59 kg |
| Type | Door Hinge |
| Function | Door Hinge |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.416 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (188604)
- 2x Febi Protective Cap/Bellow, shock absorber (109362)
£30.53
Important compatibility info
| Function | Suspension Spring |
| Type | Suspension Spring |
| Weight | 1.870 kg |
| Outer diameter | 134 mm |
| Length | 330 mm |
| Placement on Vehicle | Front Axle |
| Wire Diameter | 11.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Additional Information | with pipe socket |
| Lock System | with two keys |
| Additional Information 2 | with bolts/screws |
| Outer diameter | 95 mm |
| Thickness | 120 mm |
| Colour | Blue |
| Type | Sealing Cap, tank unit (Urea injection) |
| Function | Sealing Cap, tank unit (Urea injection) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023