Proud to be a UK-based company
Contact us
Important compatibility info
| Brake caliper piston diameter | 52 mm |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178764 |
| Weight | 2.27 kg |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.51
Important compatibility info
| Additional Information | with bush |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 3555 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Resistance | 1185 Ohm |
| Weight | 0.210 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.51
Important compatibility info
| Width | 18 mm |
| Number of Teeth | 120 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt Kit |
| Weight | 0.897 kg |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (12661)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (02558)
£30.51
Important compatibility info
| Weight | 0.407 kg |
| Placement on Vehicle | Front |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (21325)
£30.52
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.760 kg |
| Placement on Vehicle | Front Axle |
| External Thread Size | M8 x 1,5 |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (19675)
- 1x Febi Rolling Bearing, suspension strut support mount (19924)
£30.52
Important compatibility info
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 27 |
| Weight | 1.712 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Weight | 0.165 kg |
| Extra Description | febi Plus |
| Function | Oil Separator, crankcase ventilation |
| Type | Oil Separator, crankcase ventilation |
| for OE number | 11 61 7 503 520 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Function | Suspension Spring |
| Outer diameter | 168 mm |
| Number of Coils | 4.6 |
| Length | 376 mm |
| Placement on Vehicle | Front Axle |
| Weight | 2.55 kg |
| Type | Suspension Spring |
| Wire Diameter | 13.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Weight | 0.526 kg |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| for OE number | 48331-0D030 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (180840)
- 2x Febi Protective Cap/Bellow, shock absorber (186119)
£30.53
Important compatibility info
| Outer diameter | 154 mm |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 394 mm |
| Wire Diameter | 12.5 mm |
| Weight | 1.89 kg |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Cooling Hose | from expansion tank to ventilation pipe |
| Function | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.107 kg |
| Type | Radiator Hose |
| Hose Length | 670 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Suspension Spring |
| Length | 187 mm |
| Outer diameter | 144 mm |
| Wire Diameter | 16 mm |
| Type | Suspension Spring |
| Weight | 3.13 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Weight | 2.645 kg |
| Placement on Vehicle | Rear Axle, Upper, Lower |
| Length | 166 mm |
| Outer diameter | 85 mm |
| Steering arm type | for trailing arm |
| Mounting points diameter | 19 mm |
| Function | Repair Kit, control/trailing arm |
| Type | Repair Kit, control/trailing arm |
| Hole Spacing | 130 mm |
| Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Material | Rubber/Metal |
| Thickness | 2 mm |
| Weight | 0.100 kg |
| Type | Gasket, oil sump |
| Function | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Additional Information | with pipe socket |
| Lock System | with two keys |
| Additional Information 2 | with bolts/screws |
| Outer diameter | 95 mm |
| Thickness | 120 mm |
| Colour | Blue |
| Type | Sealing Cap, tank unit (Urea injection) |
| Function | Sealing Cap, tank unit (Urea injection) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Weight | 1.9 kg |
| Function | Spring, driver cab suspension |
| Thickness | 270 mm |
| Outer diameter | 89 mm |
| Placement on Vehicle | Front, Rear |
| Type | Spring, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Weight | 0.75 kg |
| Number of Connectors / Ports | 2 |
| Number of mounting bores | 2 |
| Mounting points diameter | 12 mm |
| Function | Dryer, air conditioning |
| Length | 290 mm |
| Outer diameter | 52 mm |
| Type | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Weight | 1.5 kg |
| External Thread Size | M14 x 1,5 |
| Length | 1440 mm |
| Outer diameter | 8.5 mm |
| Inner diameter | 4 mm |
| Pressure | 400 bar |
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 19.6 mm |
| Material | Steel |
| Outer diameter | 188 mm |
| Inner diameter | 172 mm |
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Weight | 0.54 kg |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.416 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (188604)
- 2x Febi Protective Cap/Bellow, shock absorber (109362)
£30.53
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Intake Hose, air filter |
| Weight | 0.453 kg |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Function | Suspension Spring |
| Type | Suspension Spring |
| Weight | 1.870 kg |
| Outer diameter | 134 mm |
| Length | 330 mm |
| Placement on Vehicle | Front Axle |
| Wire Diameter | 11.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 342 mm |
| Weight | 2.08 kg |
| Outer diameter | 152 mm |
| Type | Suspension Spring |
| Wire Diameter | 12.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Weight | 0.829 kg |
| Material | Cast Aluminium |
| Number of Teeth | 27 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Placement on Vehicle | Left Front, Upper, Lower |
| Weight | 0.59 kg |
| Type | Door Hinge |
| Function | Door Hinge |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 4.2 kg |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 240 mm |
| Thickness | 39 mm |
| Brake Disc Thickness | 21.7 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 61 mm |
| Surface | Coated |
| Number of mounting bores | 4 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Replaces | 31301 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.54
Important compatibility info
| Function | Fuel filter |
| Filter type | In-Line Filter, without water sensor, with water drain screw |
| Height | 122 mm |
| Type | Fuel filter |
| Pipe Diameter | 10 mm |
| Weight | 0.426 kg |
| Outer diameter | 103 mm |
| Additional Information | with valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.54
Important compatibility info
| Weight | 1.45 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 121 mm. 37 mm |
| Number of Teeth | 23 |
| Bolt Hole Circle Diameter | 100 mm |
| Internal Thread Size | M12 x 1,5, M8 x 1,25 |
| Function | Wheel Hub |
| Height | 75 mm |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.54
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Filter type | Screen Filter |
| Weight | 0.30 kg |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Length | 145 mm |
| Height | 62 mm |
| Width | 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.54
Important compatibility info
| Inner diameter | 14 mm |
| Weight | 0.760 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.54
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 840 mm |
| Colour | White |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Weight | 0.05 kg |
| Type | Sensor, wheel speed |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.55
Important compatibility info
| Number of Connectors / Ports | 6 |
| Lock System | with double sealing |
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 178972 |
| Weight | 0.661 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.55
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Lock System | with double sealing |
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 178971 |
| Weight | 0.656 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.55
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.462 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 118 |
| Timing Chain Size | G67WZ |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.56
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 2495 mm |
| Type | V-Ribbed Belt |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Weight | 0.403 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.56
Important compatibility info
| Material | Plastic |
| Outer diameter | 70 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 33 mm |
| Weight | 0.1 kg |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.56
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 2 210 413 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Weight | 0.51 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.56
Important compatibility info
| Material | FKM (fluorocarbon rubber), Aluminium |
| Function | Gasket, oil filter housing |
| Weight | 0.160 kg |
| Type | Gasket, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.56
Important compatibility info
| Internal Thread Size | M8 x 1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Inner diameter | 12.2 mm |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Weight | 0.730 kg |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.57
Important compatibility info
| Weight | 0.336 kg |
| Length | 190.6 mm |
| Height | 45 mm |
| Width | 154 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information 2 | with oil sump gasket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (171507)
- 1x Febi Gasket, automatic transmission oil sump (171508)
£30.57
Important compatibility info
| Placement on Vehicle | Lower, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 0.730 kg |
| Type | Mounting, engine |
| for OE number | 1 612 783 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.57
Important compatibility info
| Weight | 0.502 kg |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Material | Aluminium |
| Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.57
Important compatibility info
| Weight | 0.104 kg |
| Paired article numbers | 176646 |
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1150 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.57
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Weight | 1.590 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.57
Important compatibility info
| Weight | 0.530 kg |
| Height | 166 mm |
| Width | 144 mm |
| Voltage | 12 V. 24 V |
| Inspection Tag | EMC, ADR |
| Bulb Type | H1 |
| Rated Power | 55 W, 70 W |
| Light Design | Halogen |
| Cable Length | 260 mm |
| Fastening Type | 3-point attachment |
| Protection Type (IP Code) | IP67 |
| Type | Rotating Beacon |
| Fulfils ECE norm | R65, R10 |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Rotating Beacon |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.58
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 13 mm |
| Material | Rubber/Metal |
| Weight | 0.946 kg |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (171380)
- 1x Febi Rolling Bearing, suspension strut support mount (30841)
£30.58
Important compatibility info
| Material | Rubber/Metal |
| Colour | Black |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Weight | 1.16 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.58
Important compatibility info
| Weight | 0.7 kg |
| Outer diameter | 247 mm |
| Inner diameter | 139 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| Replaces | 49339 |
| Height | 415 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.58
Important compatibility info
| Weight | 0.040 kg |
| Function | Sensor, exhaust pressure |
| Type | Sensor, exhaust pressure |
| Number of Connectors / Ports | 3 |
| for OE number | 642 905 02 00 |
| Sensor Type | Differential Pressure Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.59
Important compatibility info
| Weight | 0.250 kg |
| Placement on Vehicle | both sides |
| Length | 547 mm |
| Housing Diameter | 15 mm |
| Eject Force | 210 N |
| Stroke | 190 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 6 mm |
| Type | Gas Spring, rear window |
| Function | Gas Spring, rear window |
| Housing length | 336.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.59
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023