Important compatibility info
Number of Parts | 3 -part |
Number of Teeth | 20 |
Hub Profile | 23.3 x 20.3 |
Outer diameter | 189 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Function | Tie Rod |
Type | Tie Rod |
Pipe Diameter | 52 mm |
Thread Size | M20X1.5 |
Length | 863 mm |
Important compatibility info
Pipe Diameter | 42 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Length | 865 mm |
Rod/Strut | Push Rod |
Thread Measurement 2 | M20X1.5 |
Thread Measurement 1 | M30X1.5 RHT |
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7306 |
Important compatibility info
Number of Gears | for reverse gear |
Length 1 | 1180 mm |
Length 2 | 836 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6061 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5388)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6112)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6284)
Important compatibility info
Length | 955 mm |
Placement on Vehicle | Front Axle Right |
Type | Drive Shaft |
External Teeth, Wheel Side | 25 |
Seal Diameter | 56 mm |
Function | Drive Shaft |
External Teeth, Diff.Side | 27 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1519)
Important compatibility info
Function | Wheel Bearing Kit |
Width 1 | 56 mm |
Inner diameter 1 | 52 mm |
Outer diameter | 91 mm |
Bearing Code | Gen 2 |
Type | Wheel Bearing Kit |
Wheelbase | Long Wheelbase |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7381 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Upper |
Length | 253 mm |
Paired article numbers | FCA7404 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6062 |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5388)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6112)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6284)
Important compatibility info
Number of Gears | for forwards gear |
Length 1 | 1161 mm |
Length 2 | 825 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Important compatibility info
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Version | With fittings(ex.KP) |
Paired article numbers | FCA7951 |
Diameter | 18 mm |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right, Upper |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7381 |
Important compatibility info
Function | Clutch Kit |
Number of Parts | 2 -part |
Hub Profile | 20.5 x 18.2 |
Outer diameter | 215 mm |
Type | Clutch Kit |
Number of Teeth | 24 |
Important compatibility info
Length | 649 mm |
Function | Drive Shaft |
Diameter 2 | 108 mm |
External Teeth, Wheel Side | 30 |
Type | Drive Shaft |
Important compatibility info
External Teeth, Diff.Side | 22 |
Function | Drive Shaft |
Length | 862 mm |
External Teeth, Wheel Side | 21 |
Placement on Vehicle | Front Axle Right |
Type | Drive Shaft |
Important compatibility info
Length | 876 mm |
Rod/Strut | Push Rod |
Pipe Diameter | 52 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Thread Measurement 1 | M30X1.5 RHT |
Thread Measurement 2 | M20X1.5 RHT |
Important compatibility info
Number of Teeth | 26 |
Additional Information | with central slave cylinder |
Function | Clutch Kit |
Type | Clutch Kit |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023