Proud to be a UK-based company
Contact us
Important compatibility info
| Internal Thread Size | M125 x 2 |
| Weight | 0.630 kg |
| Spanner Size | 110 |
| Type | Protection Lid, wheel hub |
| Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| External Teeth, Wheel Side | 25 |
| Seal Diameter | 49 mm |
| Internal Teeth, wheel side | 21 |
| Weight | 1.860 kg |
| Type | Joint Kit, drive shaft |
| External Thread Size | M18 x 1,5 |
| Function | Joint Kit, drive shaft |
| Outer diameter | 75 mm |
| Length | 147 mm |
| Placement on Vehicle | Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.211 kg |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Stroke | 190 mm |
| Weight | 0.2 kg |
| Eject Force | 390 N |
| Housing Diameter | 18 mm |
| Mounting points diameter | 16.5 mm |
| Length | 534 mm |
| Housing length | 305 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.041 kg |
| Control Type | Rocker Actuation |
| Number of Connectors / Ports | 6 |
| Function | Switch, differential lock |
| Voltage | 24 V |
| Type | Switch, differential lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.217 kg |
| Placement on Vehicle | both sides |
| Length | 450 mm |
| Housing Diameter | 18 mm |
| Eject Force | 455 N |
| Stroke | 144 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 1.460 kg |
| Type | Repair Kit, brake camshaft |
| Function | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 129 mm |
| Material | Steel |
| Spanner Size | 19 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.38 kg |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 121 mm. 37 mm |
| Thickness | 74.7 mm |
| Number of Teeth | 21 |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Hub |
| Internal Thread Size | M12 x 1,5, M8 x 1,25 |
| Type | Wheel Hub |
| Weight | 1.45 kg |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Placement on Vehicle | Right |
| Material | Plastic |
| Paired article numbers | 24886 |
| Colour | Black |
| Function | Exterior Door Handle |
| Weight | 0.780 kg |
| Type | Exterior Door Handle |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.300 kg |
| Function | Expansion Tank, coolant |
| Material | Plastic |
| Type | Expansion Tank, coolant |
| for OE number | 2 066 919 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.848 kg |
| Material | Cast Aluminium |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Aluminium |
| Seal Material | Paper |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Replaces | 37413 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Cable Length | 835 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.04 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 2.9 kg |
| Placement on Vehicle | Front Axle |
| Length | 360 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.8 mm |
| Type | Suspension Spring |
| Outer diameter | 109 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.56 kg |
| Length | 180 mm |
| Width | 52 mm |
| Thickness | 105 mm |
| Inner diameter | 30 mm |
| Placement on Vehicle | Front |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 559 mm |
| Min. Length | 344 mm |
| Pipe Diameter | 39 mm. 51 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber |
| Weight | 4.1 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.505 kg |
| Hose Length | 480 mm |
| Placement on Vehicle | Upper |
| Inner diameter | 40 mm. 49 mm. 55 mm. 8 mm |
| Function | Radiator Hose |
| Cooling Hose | from engine to engine cooler |
| Type | Radiator Hose |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| for OE number | 11 15 7 559 528 |
| Weight | 0.143 kg |
| Hose Length | 490 mm |
| Height | 130 mm |
| Width | 240 mm |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 19 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Additional Information 2 | with top, with screw |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Material | Metal |
| Outer diameter | 78 mm |
| Weight | 0.5 kg |
| Width of castor bearing surface | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Outer diameter | 107 mm |
| Weight | 0.24 kg |
| Spanner Size | 36 |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Extra Description | febi Plus |
| Height | 312 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023