Important compatibility info
Function | Gasket Kit, cylinder head |
Weight | 0.197 kg |
Type | Gasket Kit, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.68 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Inner diameter | 12 mm |
Inner diameter 1 | 12 mm |
Outer diameter 1 | 38 mm |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Width 1 | 20 mm |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 107290 |
Number of Connectors / Ports | 2 |
Weight | 0.150 kg |
Placement on Vehicle | Front Axle Left |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Rear |
Length | 180 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Weight | 0.89 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.063 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Cable Length | 1130 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 205 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Weight | 0.021 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 27 |
Weight | 2.04 kg |
Seal Diameter | 60 mm |
Number of Teeth, ABS ring | 46 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Internal Teeth, wheel side | 22 |
Outer diameter | 79 mm |
Placement on Vehicle | Front Axle, Wheel Side |
Length | 153 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.134 kg |
Width | 44 mm |
Material | Plastic |
Outer diameter | 55 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 22 mm |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 69 mm |
Outer diameter | 122 mm. 44 mm |
Inner diameter | 30 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 95 mm |
Weight | 1.5 kg |
Placement on Vehicle | Front Axle |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Steering arm type | Control Arm |
Rod/Strut | Guide Rod |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.532 kg |
Type | Control/Trailing Arm, wheel suspension |
for OE number | 220 350 27 06 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Opening Temperature | 82 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Weight | 0.354 kg |
Additional Information 2 | with seal ring |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 149 mm |
Outer diameter | 84.5 mm |
Placement on Vehicle | Wheel Side |
External Thread Size | M22 x 1,5 |
Function | Joint Kit, drive shaft |
Weight | 2.300 kg |
Number of Teeth, ABS ring | 44 |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 28 |
Seal Diameter | 56.6 mm |
Internal Teeth, wheel side | 33 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.11 kg |
Width | 25 mm |
Number of Teeth | 89 |
Belts | with rounded tooth profile |
Type | Timing Belt |
Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 06 84 694 |
Weight | 0.822 kg |
Placement on Vehicle | Front |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 0.760 kg |
Placement on Vehicle | Front Axle |
External Thread Size | M8 x 1,5 |
Additional Information 2 | with ball bearing |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (19675)
- 1x Febi Rolling Bearing, suspension strut support mount (19924)
Important compatibility info
Weight | 1.91 kg |
Placement on Vehicle | Front Axle |
Length | 154.8 mm. 155.2 mm |
Width | 63.6 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.9 mm |
Function | Brake Pad Set, disc brake |
Brake System | ATE |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Glow Plug Type | after-glow capable |
Type | Glow Plug |
Function | Glow Plug |
External Thread Size | M12 x 1,25 |
Fitting Depth | 27 mm |
Weight | 0.029 kg |
Voltage | 11.5 V |
Spanner Size | 12 |
Length | 86.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front, Right Front |
Length | 732 mm |
Housing Diameter | 19 mm |
Eject Force | 210 N |
Stroke | 313 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, front panel |
Function | Gas Spring, front panel |
Housing length | 395.5 mm |
Weight | 0.4 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.118 kg |
Placement on Vehicle | Front Axle Right |
Number of Connectors / Ports | 2 |
Resistance | 1400 Ohm |
Cable Length | 940 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.560 kg |
Function | Expansion Tank, coolant |
Outer diameter 2 | 11 mm |
Outer diameter 1 | 11 mm |
Outer diameter | 25 mm |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information | without coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023