Important compatibility info
Function | Charge Air Hose |
Weight | 0.482 kg |
Turbocharger line | Charge air cooler to intake manifold |
Inner diameter 2 | 62 mm |
Inner diameter 1 | 55 mm |
Outer diameter 1 | 67 mm |
Outer diameter 2 | 73 mm |
Additional Information 2 | with clamp |
Placement on Vehicle | Charge Air Cooler, Left |
Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.134 kg |
Width | 44 mm |
Material | Plastic |
Outer diameter | 55 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 22 mm |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 27 |
Weight | 2.04 kg |
Seal Diameter | 60 mm |
Number of Teeth, ABS ring | 46 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Internal Teeth, wheel side | 22 |
Outer diameter | 79 mm |
Placement on Vehicle | Front Axle, Wheel Side |
Length | 153 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 67 mm |
Opening Temperature | 83 °C |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Type | Thermostat, coolant |
Weight | 0.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 37 mm |
Number of Holes | 4 |
Number of Teeth | 21 |
Bolt Hole Circle Diameter | 100 mm |
Weight | 1.446 kg |
Placement on Vehicle | Front Axle |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Inner diameter | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front, Right Front |
Length | 732 mm |
Housing Diameter | 19 mm |
Eject Force | 210 N |
Stroke | 313 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, front panel |
Function | Gas Spring, front panel |
Housing length | 395.5 mm |
Weight | 0.4 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket Kit, cylinder head |
Weight | 0.197 kg |
Type | Gasket Kit, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 163 mm |
Function | Expansion Tank, coolant |
Material | PP (Polypropylene) |
Weight | 0.482 kg |
Length | 249 mm |
Height | 220 mm |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Seal Diameter | 67 mm |
Internal Teeth, wheel side | 32 |
Weight | 2.730 kg |
Outer diameter | 93 mm |
External Teeth, Wheel Side | 24 |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Length | 210 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 149 mm |
Outer diameter | 84.5 mm |
Placement on Vehicle | Wheel Side |
External Thread Size | M22 x 1,5 |
Function | Joint Kit, drive shaft |
Weight | 2.300 kg |
Number of Teeth, ABS ring | 44 |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 28 |
Seal Diameter | 56.6 mm |
Internal Teeth, wheel side | 33 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.11 kg |
Width | 25 mm |
Number of Teeth | 89 |
Belts | with rounded tooth profile |
Type | Timing Belt |
Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 107290 |
Number of Connectors / Ports | 2 |
Weight | 0.150 kg |
Placement on Vehicle | Front Axle Left |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.280 kg |
Length | 158 mm |
Number of Connectors / Ports | 4 |
Function | Ignition Coil |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.560 kg |
Function | Expansion Tank, coolant |
Outer diameter 2 | 11 mm |
Outer diameter 1 | 11 mm |
Outer diameter | 25 mm |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information | without coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 1300 mm |
Colour | Blue |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.118 kg |
Placement on Vehicle | Front Axle Right |
Number of Connectors / Ports | 2 |
Resistance | 1400 Ohm |
Cable Length | 940 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 205 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Weight | 0.021 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with coolant level sensor |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Weight | 0.580 kg |
Material | Plastic |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.035 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 775 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.81 kg |
Length | 110 mm |
Placement on Vehicle | Upper Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.13 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 1140 mm |
Colour | Grey |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.063 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Cable Length | 1130 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 69 mm |
Outer diameter | 122 mm. 44 mm |
Inner diameter | 30 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 95 mm |
Weight | 1.5 kg |
Placement on Vehicle | Front Axle |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.810 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 67 mm |
Thickness | 83 mm |
Inner diameter | 15 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 126 mm. 72 mm |
Inner diameter | 29 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 100 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with axle nut |
Width | 82 mm |
Weight | 1.97 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with holder |
Placement on Vehicle | Front Axle Right |
Material | Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Thickness | 63 mm |
Outer diameter | 69.7 mm |
Inner diameter | 26 mm |
Paired article numbers | 172047, 174332 |
Weight | 0.682 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 180288 |
Weight | 2.470 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 34 mm |
Weight | 0.523 kg |
for OE number | 51.95800.6111 |
Material | Metal |
Outer diameter | 74 mm |
Mounting points diameter | 12 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower |
Material | AEM (Ethylene Acrylate Rubber) |
Weight | 0.418 kg |
Type | Charge Air Hose |
Hose Length | 250 mm |
Wall Thickness | 5 mm |
Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.470 kg |
Paired article numbers | 180287 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.671 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Paired article numbers | 175395 |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Track rollers material | Metal |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 19.2 mm. 21.9 mm |
Outer diameter | 53.1 mm. 63 mm |
Inner diameter | 47.7 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
for OE number | 5131.A6 S1 |
Weight | 0.19 kg |
Function | Repair Kit, axle beam |
Type | Repair Kit, axle beam |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.671 kg |
Additional Information | with rubber mounts |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 175380 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Length | 583 mm |
Additional Information | with rubber mounts |
Rod/Strut | Guide Rod |
Weight | 2.196 kg |
Type | Rod/Strut, wheel suspension |
Function | Rod/Strut, wheel suspension |
External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.167 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 50 |
Timing Chain Size | G67HP, G67HR, G67AM |
Function | Timing Chain |
Additional Information 2 | Requires special tools for mounting |
Type | Timing Chain |
Replaces | 25362 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Coils | 4.6 |
Type | Suspension Spring |
Function | Suspension Spring |
Outer diameter | 145 mm |
Length | 322 mm |
Weight | 1.5 kg |
Placement on Vehicle | Front Axle |
Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Type | Oil Pressure |
Placement on Vehicle | Rear Axle |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 559 mm |
Min. Length | 344 mm |
Pipe Diameter | 39 mm. 51 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 12 mm |
Function | Shock Absorber |
Weight | 4.1 kg |
Shock Absorber Design | Telescopic Shock Absorber |
Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bearing |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 1.514 kg |
Steering arm type | Control Arm |
Placement on Vehicle | Upper, Rear Axle Left, Rear Axle Right, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Teeth, wheel side | 22 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
ABS Ring Diameter | 84 mm |
Number of Teeth, ABS ring | 47 |
Weight | 1.894 kg |
External Teeth, Wheel Side | 33 |
Thread Size | M20x1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.530 kg |
Placement on Vehicle | both sides |
Length | 667 mm |
Housing Diameter | 22 mm |
Eject Force | 755 N |
Stroke | 238 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 394.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information | with stop function |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M125 x 2 |
Weight | 0.630 kg |
Spanner Size | 110 |
Type | Protection Lid, wheel hub |
Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.34 kg |
Thickness | 1.74 mm |
Function | Gasket, cylinder head |
Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M10x1,5 |
Internal Teeth, wheel side | 28 |
Weight | 2.134 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Joint Type | Tripod Joint |
Weight | 0.177 kg |
Inner diameter 2 | 79 mm |
Inner diameter 1 | 25 mm |
Material | Thermoplastic polyester elastomer |
Length | 105 mm |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (188120)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Length | 265 mm |
Function | Hydraulic Hose, steering |
Material | Rubber |
Type | Hydraulic Hose, steering |
Additional Information | with quick coupling |
Weight | 0.177 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1375 mm |
Number of Connectors / Ports | 2 |
Weight | 0.075 kg |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1000 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Weight | 0.05 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided, Wheel Side |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 21 |
Internal Teeth, wheel side | 21 |
Weight | 1.726 kg |
Number of Teeth, ABS ring | 48 |
ABS Ring Diameter | 99 mm |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Replaced by | 24341 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 835 mm |
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Weight | 0.04 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023