Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 205 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Weight | 0.021 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.91 kg |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 149 mm |
Outer diameter | 84.5 mm |
Placement on Vehicle | Wheel Side |
External Thread Size | M22 x 1,5 |
Function | Joint Kit, drive shaft |
Weight | 2.300 kg |
Number of Teeth, ABS ring | 44 |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 28 |
Seal Diameter | 56.6 mm |
Internal Teeth, wheel side | 33 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.11 kg |
Width | 25 mm |
Number of Teeth | 89 |
Belts | with rounded tooth profile |
Type | Timing Belt |
Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.134 kg |
Width | 44 mm |
Material | Plastic |
Outer diameter | 55 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 22 mm |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Seal Diameter | 67 mm |
Internal Teeth, wheel side | 32 |
Weight | 2.730 kg |
Outer diameter | 93 mm |
External Teeth, Wheel Side | 24 |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Length | 210 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.430 kg |
Placement on Vehicle | Left Rear |
Length | 967 mm |
Paired article numbers | 170669 |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with holder |
Placement on Vehicle | Front Axle Right |
Material | Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Thickness | 63 mm |
Outer diameter | 69.7 mm |
Inner diameter | 26 mm |
Paired article numbers | 172047, 174332 |
Weight | 0.682 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.810 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 67 mm |
Thickness | 83 mm |
Inner diameter | 15 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 126 mm. 72 mm |
Inner diameter | 29 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 100 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with axle nut |
Width | 82 mm |
Weight | 1.97 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower |
Material | AEM (Ethylene Acrylate Rubber) |
Weight | 0.418 kg |
Type | Charge Air Hose |
Hose Length | 250 mm |
Wall Thickness | 5 mm |
Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.470 kg |
Paired article numbers | 180287 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 180288 |
Weight | 2.470 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 34 mm |
Weight | 0.523 kg |
for OE number | 51.95800.6111 |
Material | Metal |
Outer diameter | 74 mm |
Mounting points diameter | 12 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 19.2 mm. 21.9 mm |
Outer diameter | 53.1 mm. 63 mm |
Inner diameter | 47.7 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
for OE number | 5131.A6 S1 |
Weight | 0.19 kg |
Function | Repair Kit, axle beam |
Type | Repair Kit, axle beam |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.671 kg |
Additional Information | with rubber mounts |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 175380 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Length | 583 mm |
Additional Information | with rubber mounts |
Rod/Strut | Guide Rod |
Weight | 2.196 kg |
Type | Rod/Strut, wheel suspension |
Function | Rod/Strut, wheel suspension |
External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.671 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Paired article numbers | 175395 |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Track rollers material | Metal |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.211 kg |
Type | Gasket, cylinder head |
Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Material | Plastic |
Paired article numbers | 24886 |
Colour | Black |
Function | Exterior Door Handle |
Weight | 0.780 kg |
Type | Exterior Door Handle |
Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.986 kg |
Int. teeth, diff.side, conn.to transm. | 34 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Weight | 0.296 kg |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (188443)
- 2x Febi Protective Cap/Bellow, shock absorber (192650)
Important compatibility info
Weight | 0.217 kg |
Placement on Vehicle | both sides |
Length | 450 mm |
Housing Diameter | 18 mm |
Eject Force | 455 N |
Stroke | 144 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.118 kg |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Bore Diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M10x1,5 |
Internal Teeth, wheel side | 28 |
Weight | 2.134 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Spring |
Number of Coils | 5.8 |
Outer diameter | 144 mm |
Length | 244 mm |
Placement on Vehicle | Rear Axle |
Type | Suspension Spring |
Weight | 2.63 kg |
Wire Diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Suspension Spring |
Placement on Vehicle | Front Axle |
Length | 351 mm |
Function | Suspension Spring |
Outer diameter | 152 mm |
Weight | 2.48 kg |
Wire Diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Weight | 2.039 kg |
Placement on Vehicle | Front Axle, Centre |
Length | 521 mm |
Cone Size | 14.6 mm |
Pipe Diameter | 30 mm |
Function | Tie Rod |
Type | Tie Rod |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1000 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Weight | 0.05 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M125 x 2 |
Weight | 0.630 kg |
Spanner Size | 110 |
Type | Protection Lid, wheel hub |
Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 75 mm |
Cone Size | 32 mm |
Weight | 1.8 kg |
Thickness | 127 mm |
Thread Type | with right-hand thread |
External Thread Size | M27 x 1,5 |
Internal Thread Size | M26 x 1,5 RHT |
Extra Description | ProKit |
Type | Angled Ball Joint / Tie Rod End |
Function | Angled Ball Joint / Tie Rod End |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.300 kg |
Function | Expansion Tank, coolant |
Material | Plastic |
Type | Expansion Tank, coolant |
for OE number | 2 066 919 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.31 kg |
Placement on Vehicle | Front Axle |
Length | 429 mm |
Outer diameter | 172 mm |
Function | Suspension Spring |
Wire Diameter | 13 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.530 kg |
Placement on Vehicle | both sides |
Length | 667 mm |
Housing Diameter | 22 mm |
Eject Force | 755 N |
Stroke | 238 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 394.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information | with stop function |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Centre |
Material | Rubber/Metal |
Outer diameter | 83 mm |
Thickness | 124 mm |
Inner diameter | 12.8 mm |
Paired article numbers | 184985 |
Weight | 0.826 kg |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1375 mm |
Number of Connectors / Ports | 2 |
Weight | 0.075 kg |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Width | 22 mm |
Material | Metal |
Outer diameter | 50 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, brake camshaft |
Weight | 0.95 kg |
Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bearing, brake camshaft (07479)
- 2x Febi Holder, brake camshaft seal ring (07480)
- 1x Febi Holder, brake camshaft seal ring (08472)
- 3x Febi Shaft Seal, brake camshaft (07481)
- 1x Febi Shaft Seal, brake camshaft (07482)
- 1x Febi Stop Plate, adjuster (07483)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (07485)
- 1x Febi Spacer, brake shaft (07486)
- 1x Febi Spacer, brake shaft (07487)
- 1x Febi Spacer, brake shaft (07489)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07490)
- 1x Febi Spacer, brake shaft (07491)
- 2x Febi Circlip (07492)
- 1x Febi Circlip, brake shaft (07493)
- 1x Febi Grease Nipple (06533)
- 1x Febi Grease Nipple (01094)
Important compatibility info
Weight | 1.96 kg |
Function | Ball Joint |
External Thread Size | M16 x 1,5, M10 x 1,25 |
Cone Size | 20 mm |
Mounting points diameter | 10.5 mm |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Joint Type | Tripod Joint |
Weight | 0.177 kg |
Inner diameter 2 | 79 mm |
Inner diameter 1 | 25 mm |
Material | Thermoplastic polyester elastomer |
Length | 105 mm |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (188120)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided, Wheel Side |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 21 |
Internal Teeth, wheel side | 21 |
Weight | 1.726 kg |
Number of Teeth, ABS ring | 48 |
ABS Ring Diameter | 99 mm |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.267 kg |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Weight | 1.8 kg |
Internal Teeth, wheel side | 22 |
Seal Diameter | 51 mm |
External Teeth, Wheel Side | 25 |
Outer diameter | 80 mm |
Length | 141 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Function | Joint Kit, drive shaft |
External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Manufacturer Restriction | Bosch (ABS/ESP 8.1) |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Outer diameter | 110 mm |
Placement on Vehicle | both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Thickness | 68 mm |
Function | Mounting, engine |
Internal Thread Size | M10 x 1,5 |
Type | Mounting, engine |
Replaces | 28169; 28170 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 25 |
Internal Teeth, wheel side | 30 |
Weight | 1.898 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Teeth, wheel side | 22 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
ABS Ring Diameter | 84 mm |
Number of Teeth, ABS ring | 47 |
Weight | 1.894 kg |
External Teeth, Wheel Side | 33 |
Thread Size | M20x1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.193 kg |
Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
Resistance | 1150 Ohm |
Cable Length | 2690 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information | with bush |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Replaced by | 24341 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.041 kg |
Control Type | Rocker Actuation |
Number of Connectors / Ports | 6 |
Function | Switch, differential lock |
Voltage | 24 V |
Type | Switch, differential lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023