invoice Page 1011 of 1895
Results 20201 - 20220 of 37886
Part number: 172688
Please enter your vehicle information above to check this fits your vehicle!
for OE number 50890-SNA-A82
Function Mounting, engine
Type Mounting, engine
Bearing/Mounting Type Rubber-Metal Mount
Placement on Vehicle Rear
Weight 0.702 kg

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 172688 Engine Mount
ONLY
£31.55
Quantity:
Part number: 01289
Please enter your vehicle information above to check this fits your vehicle!
Material Cast Aluminium
Number of Wings 14
Function Water Pump, engine cooling
Water pump impeller material Metal
Seal Material Paper
Weight 1.101 kg
Additional Information with gasket/seal
Type Water Pump, engine cooling

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 01289 Water Pump
ONLY
£31.55
Quantity:
Part number: 39025
Please enter your vehicle information above to check this fits your vehicle!
Placement on Vehicle Front Axle
Length 75 mm
Cone Size 32 mm
Weight 1.8 kg
Thickness 127 mm
Thread Type with right-hand thread
External Thread Size M27 x 1,5
Internal Thread Size M26 x 1,5 RHT
Extra Description ProKit
Type Angled Ball Joint / Tie Rod End
Function Angled Ball Joint / Tie Rod End
Additional Information with crown nut and split pin

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 39025 Tie / Track Rod End
ONLY
£31.56
Quantity:
Part number: 188430
Please enter your vehicle information above to check this fits your vehicle!
Type Cap, oil filter housing
Function Cap, oil filter housing
Outer diameter 107 mm
Weight 0.24 kg
Spanner Size 36
Bolt Head/Nut Design Male Hex
Tightening Torque 25 Nm
Extra Description febi Plus
Height 312 mm
Additional Information 2 with seal ring

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 188430 Oil Filter Cap
ONLY
£31.56
Quantity:
Part number: 171489
Please enter your vehicle information above to check this fits your vehicle!
Function Suspension Strut Support Mount
Weight 1.060 kg
Paired article numbers 177032
Inner diameter 12 mm
Type Suspension Strut Support Mount
Additional Information 2 without ball bearing
Material Rubber/Metal
Placement on Vehicle Rear Axle

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 171489 Top Strut Mounting
ONLY
£31.56
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Type Control Valve, camshaft adjustment
Placement on Vehicle Intake Side, Exhaust Side
Weight 0.237 kg
Function Control Valve, camshaft adjustment
Extra Description febi Plus
for OE number 11 36 7 593 719

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 175058 Camshaft Adjuster Valve
ONLY
£31.56
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Weight 0.050 kg
Function Resistor, interior blower
Number of Connectors / Ports 9
Colour Black, White
Material Plastic
Extra Description febi Plus
Type Resistor, interior blower

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 100048 Heater / Blower Resistor
ONLY
£31.58
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Width 160 mm
Length 285 mm
Function Hydraulic Filter, automatic transmission
Thickness 220 mm
Type Hydraulic Filter, automatic transmission
Weight 0.405 kg
Filter type Screen Filter
Transmission Type CVT Automatic Transmission (stepless)

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 101900 Automatic GearBox Oil Filter
ONLY
£31.58
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Weight 0.528 kg
Placement on Vehicle Lower Front Axle, both sides
Outer diameter 70 mm. 34 mm
Thickness 80 mm
Inner diameter 24 mm
Bearing/Mounting Type Hydro Mount
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 27880 Wishbone / Control / Trailing Arm Bush
ONLY
£31.58
Quantity:
Part number: 41251
Please enter your vehicle information above to check this fits your vehicle!
Weight 1.34 kg
Placement on Vehicle Front Axle Left, Lower, Front Axle Right
Cone Size 21.5 mm
Mounting points diameter 12.2 mm
Function Ball Joint
External Thread Size M16 x 1,5
Type Ball Joint
Additional Information 2 with crown nut
Steering arm type for control arm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 41251 Ball Joint
ONLY
£31.59
Quantity:
Part number: 35192
Please enter your vehicle information above to check this fits your vehicle!
Material EPDM (ethylene propylene diene Monomer (M-class) rubber)
Inner diameter 60 mm. 65 mm
Function Radiator Hose
Type Radiator Hose
Weight 0.23 kg
Hose Length 330 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 35192 Radiator Hose
ONLY
£31.59
Quantity:
Part number: 174968
Please enter your vehicle information above to check this fits your vehicle!
Outer diameter 84 mm
Type Wheel Bearing Kit
Function Wheel Bearing Kit
Width 45 mm
Placement on Vehicle Front Axle
Bearing Type Angular Ball Bearing
Weight 1.214 kg
Inner diameter 45 mm
Additional Information 2 with integrated magnetic sensor ring, with ABS sensor ring

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

  • 1x Febi Wheel Bearing (174967)
  • 1x Febi Circlip (173838)
Febi 174968 Wheel Bearing Kit
ONLY
£31.60
Quantity:
Part number: 183720
Please enter your vehicle information above to check this fits your vehicle!
Placement on Vehicle Rear Axle Left, Rear Axle Right, Front
Material Rubber/Metal
Outer diameter 73.5 mm
Thickness 85 mm
Inner diameter 17 mm
Weight 0.325 kg
Type Bushing, axle beam
Function Bushing, axle beam

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 183720 Axle Beam Mount
ONLY
£31.61
Quantity:
Part number: 30009
Please enter your vehicle information above to check this fits your vehicle!
Weight 1.114 kg
Placement on Vehicle Left Rear
Width 115 mm
Thickness 85 mm
Bearing/Mounting Type Rubber-Metal Mount
Outer Length 115 mm
Function Mounting, automatic transmission
Type Mounting, automatic transmission

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 30009 Gearbox Mounting
ONLY
£31.61
Quantity:
Part number: 178664
Please enter your vehicle information above to check this fits your vehicle!
Extra Description febi Plus
Length 57 mm
Weight 0.02 kg
Type Regulating Valve, oil pressure
Function Regulating Valve, oil pressure
External Thread Size M14 x 1,5

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 178664 Non Return Valve
ONLY
£31.62
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Weight 3.9 kg
Rim Hole Number 4 -Hole
Rotor Style Solid
Placement on Vehicle Front Axle
Outer diameter 256 mm
Thickness 41.1 mm
Brake Disc Thickness 11 mm
Minimum thickness 8 mm
Bolt Hole Circle Diameter 100 mm
Centering Diameter 60 mm
Surface Coated
Number of mounting bores 1
Type Brake Disc Rotor
Function Brake Disc

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 17209 2x Brake Discs Pair Solid
ONLY
£31.62
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Weight 3.8 kg
Rotor Style Internally Vented
Rim Hole Number 5 -Hole
Placement on Vehicle Front Axle
Outer diameter 239 mm
Thickness 34.9 mm
Brake Disc Thickness 18 mm
Minimum thickness 16 mm
Bolt Hole Circle Diameter 100 mm
Centering Diameter 65 mm
Surface Coated
Number of mounting bores 1
Type Brake Disc Rotor
Function Brake Disc

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 22874 2x Brake Discs Pair Vented
ONLY
£31.62
Quantity:
Part number: 175325
Please enter your vehicle information above to check this fits your vehicle!
Placement on Vehicle both sides
Length 320 mm
Weight 0.2 kg
Housing Diameter 19 mm
Eject Force 410 N
Stroke 113 mm
Mounting points diameter 18 mm
Piston conrod diameter 8 mm
Type Gas Spring, bonnet
Function Gas Spring, bonnet
Housing length 180.5 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 175325 Bonnet Gas Strut
ONLY
£31.62
Quantity:
Part number: 188435
Please enter your vehicle information above to check this fits your vehicle!
Placement on Vehicle Rear Axle
Width 26 mm
Outer diameter 190 mm
Weight 0.8 kg
Type Brake Shoe Set, parking brake
Function Brake Shoe Set, parking brake

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

No image found
ONLY
£31.64
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Weight 0.234 kg
Type Dust Cover Kit, shock absorber
Function Dust Cover Kit, shock absorber
Placement on Vehicle Front Axle

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

  • 2x Febi Protective Cap/Bellow, shock absorber (34288)
  • 2x Febi Rubber Buffer, suspension (26177)
Febi 180253 Shock Absorber Dust Cover Kit
ONLY
£31.64
Quantity:

Featured brands
NAPA
Borg & Beck
Febi
Gates
Bosch
Blue Print
Reviews

All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....


RS
R S
Sept 2023

A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......


MT
Mark T
Sept 2023

First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.


GR
Graham P
Sept 2023

Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.


DP
David P
Aug 2023

Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....


DB
Daniel B
Aug 2023