Important compatibility info
Weight | 0.744 kg |
Material | Cast Aluminium |
Number of Teeth | 19 |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Function | Mounting, transfer case |
Weight | 1.115 kg |
Type | Mounting, transfer case |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.116 kg |
Placement on Vehicle | Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 1875 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Function | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Weight | 1.352 kg |
Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Dryer Cartridge, compressed-air system |
Height | 176 mm |
Outer diameter | 136 mm |
Internal Thread Size | M39 x 1,5 |
Additional Information 2 | with integrated oil separator, with seal ring |
Type | Air Dryer Cartridge, compressed-air system |
Weight | 2.3 kg |
Spanner Size | 30 |
Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, pneumatic suspension level |
Inner diameter | 11.5 mm |
Number of Connectors / Ports | 2 |
Weight | 0.121 kg |
Internal Thread Size | M6 x 1 |
Type | Sensor, pneumatic suspension level |
Hole Spacing | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.8 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 39557 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.8 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 39558 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Weight | 2.94 kg |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 239 mm |
Thickness | 33.6 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 65 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.064 kg |
Placement on Vehicle | Right |
Paired article numbers | 176682 |
Type | Washer Fluid Jet, headlight cleaning |
Function | Washer Fluid Jet, headlight cleaning |
Extra Description | febi Plus |
Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.224 kg |
Additional Information | with bush |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Resistance | 1185 Ohm |
Cable Length | 3440 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 185 mm |
Height | 158 mm |
Width | 98.5 mm |
Additional Information | with gasket/seal |
Additional Information 2 | with filter |
Filter type | with water drain screw |
Weight | 0.48 kg |
Type | Housing, fuel filter |
Function | Housing, fuel filter |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 353 mm |
Outer diameter | 110 mm |
Weight | 2.379 kg |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 13.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.968 kg |
Placement on Vehicle | Right |
Length | 157 mm |
Width | 138 mm |
Thickness | 75 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 19.1 mm. 19.4 mm |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | with acoustic wear warning |
Placement on Vehicle | Front Axle |
Inspection Tag | ECE R90 Approved |
Type | Brake Pad Set, disc brake |
Weight | 1.976 kg |
Additional Information 2 | with fastening material |
Length | 133.8 mm |
Width | 59.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.475 kg |
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Material | Aluminium |
Core Length | 142 mm |
Core Width | 80 mm |
Core Depth | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.894 kg |
Placement on Vehicle | outer, Rear Axle |
Length | 166.5 mm |
Mounting points diameter | 19 mm |
Type | Repair Kit, control/trailing arm |
Function | Repair Kit, control/trailing arm |
Additional Information 2 | with retaining ring, with spacer disc |
Outer diameter | 75 mm |
Steering arm type | for trailing arm, for triangular control arm (CV) |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Semi-Trailing Arm |
Weight | 2.741 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Additional Information | with rubber-metal mounts |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.525 kg |
Placement on Vehicle | Rear Axle, Front |
Length | 91 mm |
Thickness | 66.5 mm |
Inner diameter | 14 mm |
Function | Mounting, differential |
Material | Rubber/Metal |
Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.477 kg |
Number of mounting bores | 3 |
for OE number | 56 79 352 |
Type | Central Slave Cylinder, clutch |
Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 4 -Hole |
Rotor Style | Internally Vented |
Weight | 3.628 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 231 mm |
Thickness | 44.1 mm |
Brake Disc Thickness | 17 mm |
Minimum thickness | 15 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 60 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 154 mm |
Thickness | 170 mm |
Inner diameter | 107 mm |
Function | Mounting, leaf spring |
Weight | 2.182 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Mounting, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.708 kg |
Placement on Vehicle | Rear Axle |
Length | 120 mm |
Outer diameter | 42 mm |
Function | Joint, propshaft |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.014 kg |
Length | 42 mm |
Width | 48 mm |
Thickness | 35 mm |
Inner diameter | 6.5 mm |
Number of Connectors / Ports | 3 |
Hole Spacing | 34 mm |
Function | Sensor, intake manifold pressure |
Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bore Diameter | 19 mm |
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Weight | 0.136 kg |
Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.37 kg |
Wire Diameter | 12.3 mm |
Placement on Vehicle | Front Axle |
Length | 366 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Outer diameter | 157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 123 mm |
Outer diameter | 104 mm |
Filter type | Filter Insert |
Function | Fuel filter |
Weight | 0.16 kg |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 1.714 kg |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 30 |
Internal Teeth, wheel side | 27 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Right |
Weight | 0.073 kg |
Cable Length | 1840 mm |
Number of Connectors / Ports | 2 |
Paired article numbers | 171102 |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without wheel bearing |
Function | Wheel Hub |
Type | Wheel Hub |
Weight | 1.837 kg |
Bolt Hole Circle Diameter | 114.3 mm |
Inner diameter | 29.6 mm |
Placement on Vehicle | Front Axle |
Outer diameter | 139 mm |
Width | 68 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.04 kg |
Placement on Vehicle | Front Axle |
Length | 165 mm |
Width | 165 mm |
Material | Rubber/Metal |
Thickness | 51 mm |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 60 mm |
Outer diameter | 5.2 mm |
Spanner Size | 27 |
Number of Connectors / Ports | 2 |
Function | Sensor, coolant temperature |
External Thread Size | M16 x 1,5 |
Weight | 0.070 kg |
Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 83 mm |
Thickness | 72 mm |
Inner diameter | 18 mm |
Weight | 0.416 kg |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Cooler, engine oil |
Weight | 0.50 kg |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.0 kg |
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.71 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 42 mm |
Outer diameter | 74 mm |
Inner diameter | 40 mm |
Bearing Type | Double Row |
Type | Wheel Bearing |
Function | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.96 kg |
Placement on Vehicle | Front Axle Left |
Length | 223 mm |
Thickness | 79 mm |
Spanner Size | 22 |
Paired article numbers | 41901 |
Function | Tie Rod End |
External Thread Size | M14 x 1,5 |
Internal Thread Size | M16 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Weight | 1.733 kg |
Paired article numbers | 182033 |
Steering arm type | Control Arm |
Additional Information 2 | with bearing |
Placement on Vehicle | Rear Axle Left, Lower, Front |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 297 mm |
Outer diameter | 48 mm |
Weight | 2.636 kg |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.992 kg |
Material | Cast Aluminium |
Number of Teeth | 29 |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.207 kg |
Length | 198.1 mm |
Valve stem diameter | 9.975 mm |
Valve head diameter | 46 mm |
Notches / Holes Number | 1 |
Type | Exhaust Valve |
Function | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.718 kg |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, automatic transmission |
Function | Mounting, automatic transmission |
Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.063 kg |
Placement on Vehicle | Front Axle Left |
Length | 640 mm |
Paired article numbers | 24610 |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Extra Description | febi Plus |
Function | Control Valve, camshaft adjustment |
Type | Control Valve, camshaft adjustment |
Number of Connectors / Ports | 2 |
Placement on Vehicle | Intake Side, Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.545 kg |
Height | 376 mm |
Outer diameter | 242 mm |
Inner diameter | 132 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with fastening material |
Placement on Vehicle | Front Axle |
Length | 163.1 mm |
Width | 71.6 mm. 81 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Weight | 2.919 kg |
Thickness/Strength 1 | 18.2 mm. 17.7 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.99 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 65 mm |
Thickness | 98 mm |
Inner diameter | 30 mm |
Function | Mounting, shock absorber |
Type | Mounting, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bushing, axle beam |
Material | Rubber |
Weight | 0.6 kg |
Type | Bushing, axle beam |
Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 15 7 559 528 |
Weight | 0.143 kg |
Hose Length | 490 mm |
Height | 130 mm |
Width | 240 mm |
Inner diameter 1 | 14 mm |
Inner diameter 2 | 19 mm |
Type | Hose, crankcase ventilation |
Function | Hose, crankcase ventilation |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.3 kg |
Placement on Vehicle | Front Axle |
Length | 397 mm |
Function | Suspension Spring |
Wire Diameter | 12.3 mm |
Type | Suspension Spring |
Outer diameter | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023