Important compatibility info
Weight | 2.39 kg |
Placement on Vehicle | Rear Axle |
Length | 381 mm |
Outer diameter | 126 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 12.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil sump |
Weight | 1.631 kg |
Extra Description | febi Plus |
Type | Oil sump |
Additional Information | without oil drain plug |
for OE number | 030 103 601 E SK |
Wet Sump Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 110 mm |
Thickness | 28 mm |
Inner diameter | 40 mm |
Number of Holes | 6 |
Bolt Hole Circle Diameter | 78 mm |
Function | Joint, propshaft |
Type | Joint, propshaft |
Weight | 0.34 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket Kit, cylinder head |
Weight | 0.2392 kg |
for OE number | 541 010 16 21 S1 |
Type | Gasket Kit, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (28685)
- 1x Febi Gasket, intake manifold (21911)
- 1x Febi Gasket, exhaust manifold (30615)
- 1x Febi Gasket, cylinder head (22013)
Important compatibility info
Additional Information 2 | with clamps, with steering bellow |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (36669)
- 1x Febi Tie Rod End (37860)
- 1x Febi Clamping Clip (38763)
- 1x Febi Clamping Clip (38756)
- 1x Febi Bellow, steering (36653)
Important compatibility info
Weight | 2.2 kg |
Length | 330 mm |
Number of Coils | 5 |
Outer diameter | 156 mm |
Function | Suspension Spring |
Type | Suspension Spring |
Placement on Vehicle | Front Axle |
Wire Diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.064 kg |
Placement on Vehicle | Right |
Paired article numbers | 176682 |
Type | Washer Fluid Jet, headlight cleaning |
Function | Washer Fluid Jet, headlight cleaning |
Extra Description | febi Plus |
Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.065 kg |
Type | Injector, urea injection |
Function | Injector, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 363 mm |
Function | Suspension Spring |
Wire Diameter | 13.3 mm |
Weight | 2.26 kg |
Type | Suspension Spring |
Outer diameter | 164 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Washer Fluid Jet, headlight cleaning |
Type | Washer Fluid Jet, headlight cleaning |
Weight | 0.022 kg |
Paired article numbers | 176706 |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle |
Length | 131 mm |
Outer diameter | 83 mm |
External Teeth, Wheel Side | 26 |
Seal Diameter | 60 mm |
Internal Teeth, wheel side | 28 |
Function | Joint Kit, drive shaft |
Weight | 2.19 kg |
Number of Teeth, ABS ring | 50 |
Type | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 25 |
Placement on Vehicle | Wheel Side |
Length | 139 mm |
Outer diameter | 80 mm |
Internal Teeth, wheel side | 29 |
Type | Joint Kit, drive shaft |
Number of Teeth, ABS ring | 43 |
Weight | 1.760 kg |
Seal Diameter | 49 mm |
External Thread Size | M18 x 1,5 |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Placement on Vehicle | Centre, Right |
Weight | 0.6 kg |
Type | Roller Guide, sliding door |
Function | Roller Guide, sliding door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Weight | 0.666 kg |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamp |
Placement on Vehicle | Charge Air Cooler |
Turbocharger line | Turbocharger to charge air cooler |
Function | Charge Air Hose |
Type | Charge Air Hose |
Outer diameter 2 | 66 mm |
Weight | 0.591 kg |
Outer diameter 1 | 62 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Inner diameter 2 | 56 mm |
Inner diameter 1 | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 100 mm |
Inner diameter | 50.8 mm |
Bearing Type | Tapered Roller Bearing |
Function | Bearing, manual transmission |
Weight | 1.25 kg |
Width | 35 mm |
Type | Bearing, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.7 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32100)
- 1x Febi Air Filter (38406)
- 1x Febi Filter, cabin air (27868)
- 4x Febi Spark Plug (13406)
Important compatibility info
Placement on Vehicle | both sides |
Length | 448 mm |
Housing Diameter | 18 mm |
Eject Force | 470 N |
Stroke | 159 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 250.5 mm |
Weight | 0.4 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Outer diameter | 69.7 mm |
Thickness | 63 mm |
Inner diameter | 26 mm |
Weight | 0.682 kg |
Paired article numbers | 174331 |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Material | Rubber/Metal |
Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Weight | 2.74 kg |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 224 mm |
Thickness | 57.6 mm |
Brake Disc Thickness | 9 mm |
Minimum thickness | 7 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 71 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023