Important compatibility info
Weight | 0.603 kg |
Type | Tensioner Pulley, timing belt |
Outer diameter | 68 mm |
Function | Tensioner Pulley, timing belt |
Width | 41 mm |
Width of castor bearing surface | 30 mm |
Replaces | 193644 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Housing Type | with housing |
Weight | 0.25 kg |
Opening Temperature | 82 °C |
Function | Thermostat, coolant |
Outer diameter | 36 mm |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1000 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Weight | 0.05 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Additional Information 2 | with retaining ring |
Function | Repair Kit, guide strut |
Type | Repair Kit, guide strut |
Weight | 2.725 kg |
Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Pump, fuel pre-supply |
Weight | 0.32 kg |
Internal Thread Size | M14 x 1,5 |
Type | Pump, fuel pre-supply |
Additional Information 2 | with filter |
Length | 105 mm |
Height | 102 mm |
Width | 75.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Type | Mounting, engine |
Weight | 0.899 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | both sides, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Actuator, headlight levelling |
Operating Mode | Electric |
Placement on Vehicle | both sides |
Weight | 0.06 kg |
Extra Description | febi Plus |
Type | Actuator, headlight levelling |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | without coolant level sensor |
Weight | 0.52 kg |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | LR 004080 SK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Oil Line, charger |
Weight | 0.141 kg |
Type | Oil Line, charger |
Forward- /Backflow | Return Line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 98 mm |
Paired article numbers | 47934 |
Placement on Vehicle | Front Axle Left |
Length | 432 mm |
Weight | 1.3 kg |
Additional Information 2 | with clamps, with steering bellow |
Function | Tie Rod |
Width | 52 mm |
Extra Description | ProKit |
Type | Tie Rod |
External Thread Size | M16 x 1,5, M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (47931)
- 1x Febi Bellow Kit, steering (39833)
Important compatibility info
Weight | 0.15 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 54 |
Function | Chain, oil pump drive |
Additional Information 2 | Requires special tools for mounting |
Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Weight | 0.774 kg |
for OE number | GS1G-39-040A |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Cable Length | 1850 mm |
Paired article numbers | 172425 |
Number of Connectors / Ports | 2 |
Weight | 0.181 kg |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.116 kg |
Placement on Vehicle | Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 1875 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.1 kg |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 26042 |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Function | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Weight | 1.352 kg |
Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 70 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Inner diameter | 10 mm |
Mounting points diameter | 10 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Weight | 0.35 kg |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Dryer Cartridge, compressed-air system |
Height | 176 mm |
Outer diameter | 136 mm |
Internal Thread Size | M39 x 1,5 |
Additional Information 2 | with integrated oil separator, with seal ring |
Type | Air Dryer Cartridge, compressed-air system |
Weight | 2.3 kg |
Spanner Size | 30 |
Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Weight | 1.004 kg |
Type | Water Pump, engine cooling |
Replaces | 17013 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.8 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 39557 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, pneumatic suspension level |
Inner diameter | 11.5 mm |
Number of Connectors / Ports | 2 |
Weight | 0.121 kg |
Internal Thread Size | M6 x 1 |
Type | Sensor, pneumatic suspension level |
Hole Spacing | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.8 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 39558 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Internal Thread Size | M20 x 1,5 |
Paired article numbers | 186128 |
Function | Tie Rod End |
Type | Tie Rod End |
Weight | 1.122 kg |
Spanner Size | 30 |
Placement on Vehicle | Front Axle Right |
Length | 205 mm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.262 kg |
Placement on Vehicle | both sides |
Length | 560 mm |
Housing Diameter | 18 mm |
Eject Force | 290 N |
Stroke | 221 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Housing length | 305.5 mm |
Mounting points diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.217 kg |
Placement on Vehicle | both sides |
Length | 450 mm |
Housing Diameter | 18 mm |
Eject Force | 455 N |
Stroke | 144 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.300 kg |
Function | Expansion Tank, coolant |
Material | Plastic |
Type | Expansion Tank, coolant |
for OE number | 2 066 919 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Weight | 2.94 kg |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 239 mm |
Thickness | 33.6 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 65 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.064 kg |
Placement on Vehicle | Right |
Paired article numbers | 176682 |
Type | Washer Fluid Jet, headlight cleaning |
Function | Washer Fluid Jet, headlight cleaning |
Extra Description | febi Plus |
Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.37 kg |
Wire Diameter | 12.3 mm |
Placement on Vehicle | Front Axle |
Length | 366 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Outer diameter | 157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.224 kg |
Additional Information | with bush |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Resistance | 1185 Ohm |
Cable Length | 3440 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023