Proud to be a UK-based company
Contact us
Important compatibility info
| Piston conrod diameter | 8 mm |
| Eject Force | 495 N |
| Stroke | 140 mm |
| Mounting points diameter | 16.5 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 209.5 mm |
| Housing Diameter | 18 mm |
| Weight | 0.195 kg |
| Length | 372 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.60
Important compatibility info
| Weight | 0.04 kg |
| Material | Plastic |
| Number of Connectors / Ports | 8 |
| Control Type | Rotary Operation |
| Function | Ignition Switch |
| Extra Description | febi Plus |
| Type | Ignition Switch |
| Replaces | 37342 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.60
Important compatibility info
| Weight | 2.450 kg |
| Placement on Vehicle | Rear Axle, Front Axle, Upper |
| Material | Rubber/Metal |
| Outer diameter | 85 mm |
| Steering arm type | for trailing arm |
| Mounting points diameter | 25 mm |
| Function | Repair Kit, control/trailing arm |
| Hole Spacing | 130 mm |
| Type | Repair Kit, control/trailing arm |
| Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.60
Important compatibility info
| for OE number | 50 01 867 708 SK2 |
| Function | Sealing Set, air compressor |
| Weight | 0.19 kg |
| Type | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.61
Important compatibility info
| Weight | 1.579 kg |
| Steering arm type | Control Arm |
| Additional Information | with rubber-metal mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Upper, Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.61
Important compatibility info
| Weight | 0.352 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.62
Important compatibility info
| Weight | 0.468 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 28285-2A700 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.62
Important compatibility info
| Length | 77.5 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Weight | 0.025 kg |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.62
Important compatibility info
| Thickness | 98 mm |
| Paired article numbers | 47935 |
| Function | Tie Rod |
| Width | 52 mm |
| Placement on Vehicle | Front Axle Right |
| Length | 432 mm |
| Weight | 1.3 kg |
| Extra Description | ProKit |
| External Thread Size | M16 x 1,5, M18 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (47932)
- 1x Febi Bellow Kit, steering (39833)
£32.63
Important compatibility info
| Weight | 2.50 kg |
| Placement on Vehicle | Front Axle |
| Length | 162.4 mm |
| Width | 79 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.63
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Weight | 0.061 kg |
| Length | 55 mm |
| Operating Mode | Mechanical |
| Spanner Size | 27 |
| Control Type | Push Actuation |
| Function | Switch |
| Type | Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.63
Important compatibility info
| Weight | 1.00 kg |
| Placement on Vehicle | Front Axle |
| Width | 158 mm |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Length | 143 mm |
| Height | 65 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.64
Important compatibility info
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Number of Wings | 18 |
| Weight | 0.65 kg |
| Number of Teeth | 18 |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.64
Important compatibility info
| Material | Aluminium |
| Inner diameter | 10 mm |
| Steering arm type | Control Arm |
| Thread Length | 22 mm |
| Cone Size | 24.5 mm. 21 mm |
| Weight | 1.44 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| External Thread Size | M12 x 1,5 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.66
Important compatibility info
| Weight | 1.5 kg |
| Length | 150 mm |
| Width | 150 mm |
| Function | Interior Blower |
| Thickness | 180 mm |
| Type | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.66
Important compatibility info
| Inner diameter | 44 mm |
| Outer diameter | 70 mm |
| Filter type | Filter Insert |
| Type | Fuel filter |
| Function | Fuel filter |
| Weight | 0.07 kg |
| Additional Information 2 | with seal ring |
| Height | 133 mm |
| Gasket inner diameter | 71.8 mm |
| Gasket outer diameter | 77 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.66
Important compatibility info
| Weight | 1.109 kg |
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 06 84 674 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.67
Important compatibility info
| Outer diameter | 85.25 mm |
| Weight | 0.400 kg |
| Function | Piston, air compressor |
| Type | Piston, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.67
Important compatibility info
| Inner diameter | 11 mm |
| Additional Information | with holder |
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Rear Axle |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bracket, stabiliser mounting (40415)
- 2x Febi Mounting, stabiliser bar (45856)
- 4x Febi Bolt, control arm (43586)
£32.67
Important compatibility info
| Weight | 0.025 kg |
| Function | Rubber Buffer, suspension |
| Material | PU (Polyurethane) |
| Placement on Vehicle | Rear Axle |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.68
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023