Important compatibility info
Function | Tie Rod |
Paired article numbers | 36150 |
Placement on Vehicle | Front Axle Right |
Weight | 1.345 kg |
Additional Information | with lock nut |
Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (26019)
Important compatibility info
Additional Information 2 | with clamps, with steering bellow |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (36669)
- 1x Febi Tie Rod End (37860)
- 1x Febi Clamping Clip (38763)
- 1x Febi Clamping Clip (38756)
- 1x Febi Bellow, steering (36653)
Important compatibility info
Extra Description | febi Plus |
Placement on Vehicle | Centre, Right |
Weight | 0.6 kg |
Type | Roller Guide, sliding door |
Function | Roller Guide, sliding door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M18 x 1,5 |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Weight | 1.045 kg |
Spanner Size | 46 |
Length | 177 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.7 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32100)
- 1x Febi Air Filter (38406)
- 1x Febi Filter, cabin air (27868)
- 4x Febi Spark Plug (13406)
Important compatibility info
Weight | 2.29 kg |
Placement on Vehicle | Front Axle |
Length | 324 mm |
Function | Suspension Spring |
Type | Suspension Spring |
Outer diameter | 144 mm |
Wire Diameter | 12.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tensioner Lever, v-ribbed belt |
External Thread Size | M12 |
Weight | 0.305 kg |
Length | 200 mm |
Type | Tensioner Lever, v-ribbed belt |
for OE number | 403 150 05 72 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner Lever, v-belt (08933)
- 1x Febi Clamping Piece, v-ribbed belt tensioner (08934)
- 1x Febi Nut (08935)
Important compatibility info
Weight | 0.065 kg |
Type | Injector, urea injection |
Function | Injector, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.065 kg |
Opening Temperature | 105 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gas Spring, boot/cargo area |
Housing length | 373 mm |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Mounting points diameter | 16.5 mm |
Stroke | 213 mm |
Eject Force | 375 N |
Housing Diameter | 18 mm |
Weight | 0.2 kg |
Length | 614 mm |
Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.225 kg |
Function | Solenoid Valve, shift cylinder |
Type | Solenoid Valve, shift cylinder |
Length | 116 mm |
Internal Thread Size | M10 x 1, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 182409 |
Weight | 1.163 kg |
Type | Tie Rod |
Function | Tie Rod |
External Thread Size | M16 x 1,5 |
Additional Information 2 | with crown nut |
Placement on Vehicle | Front Axle Left |
Length | 396 mm |
Outer diameter | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle |
Length | 131 mm |
Outer diameter | 83 mm |
External Teeth, Wheel Side | 26 |
Seal Diameter | 60 mm |
Internal Teeth, wheel side | 28 |
Function | Joint Kit, drive shaft |
Weight | 2.19 kg |
Number of Teeth, ABS ring | 50 |
Type | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.39 kg |
Placement on Vehicle | Rear Axle |
Length | 381 mm |
Outer diameter | 126 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 12.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 25 |
Placement on Vehicle | Wheel Side |
Length | 139 mm |
Outer diameter | 80 mm |
Internal Teeth, wheel side | 29 |
Type | Joint Kit, drive shaft |
Number of Teeth, ABS ring | 43 |
Weight | 1.760 kg |
Seal Diameter | 49 mm |
External Thread Size | M18 x 1,5 |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket Kit, cylinder head |
Weight | 0.2392 kg |
for OE number | 541 010 16 21 S1 |
Type | Gasket Kit, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (28685)
- 1x Febi Gasket, intake manifold (21911)
- 1x Febi Gasket, exhaust manifold (30615)
- 1x Febi Gasket, cylinder head (22013)
Important compatibility info
Outer diameter | 100 mm |
Inner diameter | 50.8 mm |
Bearing Type | Tapered Roller Bearing |
Function | Bearing, manual transmission |
Weight | 1.25 kg |
Width | 35 mm |
Type | Bearing, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 448 mm |
Housing Diameter | 18 mm |
Eject Force | 470 N |
Stroke | 159 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 250.5 mm |
Weight | 0.4 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamp |
Placement on Vehicle | Charge Air Cooler |
Turbocharger line | Turbocharger to charge air cooler |
Function | Charge Air Hose |
Type | Charge Air Hose |
Outer diameter 2 | 66 mm |
Weight | 0.591 kg |
Outer diameter 1 | 62 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Inner diameter 2 | 56 mm |
Inner diameter 1 | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.96 kg |
Placement on Vehicle | Rear Axle |
Length | 330 mm |
Outer diameter | 101 mm |
Function | Suspension Spring |
Wire Diameter | 15 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, stabiliser bar |
Outer diameter | 89 mm |
Weight | 2.931 kg |
Placement on Vehicle | Rear Axle |
Length | 172 mm |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Placement on Vehicle | Left Front |
Weight | 0.24 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Outer diameter | 69.7 mm |
Thickness | 63 mm |
Inner diameter | 26 mm |
Weight | 0.682 kg |
Paired article numbers | 174331 |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Material | Rubber/Metal |
Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.982 kg |
Placement on Vehicle | Front Axle |
Length | 175 mm |
Width | 79.3 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Model | DEFENDER DISCOVERY DISCOVERY SPORT E-PACE EVOQUE SPORT |
Manufacturer | JAGUAR LAND ROVER RANGE ROVER |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 251 mm |
Thickness | 40.7 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 9 mm |
Bolt Hole Circle Diameter | 98 mm |
Centering Diameter | 59 mm |
Surface | Coated |
Number of mounting bores | 4 |
Function | Brake Disc |
Rim Hole Number | 4 -Hole |
Weight | 3.42 kg |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.703 kg |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Alternator Freewheel Clutch |
Number of Ribs | 7 |
Weight | 0.538 kg |
Type | Alternator Freewheel Clutch |
Inner diameter | 14 mm |
Outer diameter | 63 mm |
Width | 40 mm |
Placement on Vehicle | engine sided |
Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Weight | 0.7 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Additional Information | with retaining rings |
Outer diameter | 75 mm |
Bolt Hole Circle Diameter | 19 mm |
Weight | 1.900 kg |
Type | Repair Kit, guide strut |
Function | Repair Kit, guide strut |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 5 V |
Material | Plastic |
Weight | 0.03 kg |
Length | 64.7 mm |
Number of Connectors / Ports | 6 |
Type | Sensor, headlight levelling |
Function | Sensor, headlight levelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 83 mm |
Material | Rubber/Metal |
Inner diameter | 12.8 mm |
Weight | 0.818 kg |
Placement on Vehicle | Rear Axle Right, Centre |
Thickness | 124 mm |
Paired article numbers | 184998 |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
Extra Description | febi Plus |
Height | 55 mm |
Additional Information | for multi-plate clutch |
Outer diameter | 38 mm |
Additional Information 2 | with bolts/screws, with top |
Weight | 0.078 kg |
Type | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
Clutch ID | Haldex Gen IV |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 249.5 mm |
Height | 99 mm |
Width | 231 mm |
Additional Information 2 | with oil sump gasket |
Filter type | Screen Filter |
Weight | 0.647 kg |
Type | Hydraulic Filter Kit, automatic transmission |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 16 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 1.6 kg |
Placement on Vehicle | Rear |
Colour Coding | Green |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.601 kg |
Placement on Vehicle | Rear |
for OE number | 2 214 442 |
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with fastening material |
Weight | 2.069 kg |
Placement on Vehicle | Front Axle |
Length | 155 mm |
Width | 58.4 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.9 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 6 mm |
Function | Seal Set, valve stem |
Outer diameter 1 | 10 mm |
Outer diameter 2 | 23 mm |
Seal Material | FPM (fluoride rubber) |
Height | 16 mm |
Type | Seal Set, valve stem |
Weight | 0.106 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Set, valve stem (28172)
- 4x Febi Spacer Sleeve (28173)
Important compatibility info
Opening Temperature | 85 °C |
Function | Thermostat, coolant |
Weight | 0.05 kg |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.000 kg |
Additional Information 2 | with ball bearing |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
for OE number | 1 900 389 S1 |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (100785)
- 1x Febi Rolling Bearing, suspension strut support mount (45037)
Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Thickness/Strength 1 | 17.8 mm. 17.4 mm |
Width | 61.2 mm |
Length | 140.7 mm |
Weight | 1.991 kg |
Additional Information 2 | with staples |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Front Axle |
Additional Information | with retaining spring holder |
Manufacturer | HYUNDAI KIA |
Model | SPORTAGE TUCSON |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 396 mm |
Additional Information 2 | with crown nut |
Outer diameter | 40 mm |
External Thread Size | M16 x 1,5 |
Function | Tie Rod |
Type | Tie Rod |
Weight | 1.196 kg |
Paired article numbers | 182411 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
for OE number | 98 241 167 80 |
Weight | 0.645 kg |
Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 22 mm |
Weight | 0.372 kg |
Width | 48 mm |
Material | Metal |
Outer diameter | 70 mm |
Mounting points diameter | 10 mm |
Type | Tensioner Pulley, v-ribbed belt |
Function | Tensioner Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.230 kg |
Material | Plastic |
Outer diameter | 70 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 32 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Material | Steel |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 522 mm |
Weight | 1.053 kg |
Steering arm type | Control Arm |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Rim Hole Number | 4 -Hole |
Weight | 3.486 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 260 mm |
Thickness | 31.2 mm |
Brake Disc Thickness | 9 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 61 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 500 mm |
Height | 43 mm |
Width | 90 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Weight | 0.22 kg |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.450 kg |
Placement on Vehicle | Rear Axle, Front Axle, Upper |
Material | Rubber/Metal |
Outer diameter | 85 mm |
Steering arm type | for trailing arm |
Mounting points diameter | 25 mm |
Function | Repair Kit, control/trailing arm |
Hole Spacing | 130 mm |
Type | Repair Kit, control/trailing arm |
Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Material | Plastic |
Number of Connectors / Ports | 8 |
Control Type | Rotary Operation |
Function | Ignition Switch |
Extra Description | febi Plus |
Type | Ignition Switch |
Replaces | 37342 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 42 mm |
Width | 34 mm |
Outer diameter | 7 mm |
Thickness | 35 mm |
Number of Connectors / Ports | 3 |
Weight | 0.015 kg |
Function | Sensor, boost pressure |
Type | Sensor, boost pressure |
for OE number | 006 153 99 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023