Important compatibility info
Length | 105 mm |
Outer diameter | 42 mm |
Function | Joint, propshaft |
Weight | 1.51 kg |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Function | Mounting, automatic transmission |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, automatic transmission |
Weight | 0.662 kg |
Colour Coding | Red |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.211 kg |
Type | Gasket, cylinder head |
Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Weight | 2.039 kg |
Placement on Vehicle | Front Axle, Centre |
Length | 521 mm |
Cone Size | 14.6 mm |
Pipe Diameter | 30 mm |
Function | Tie Rod |
Type | Tie Rod |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.267 kg |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.34 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 21.5 mm |
Mounting points diameter | 12.2 mm |
Function | Ball Joint |
External Thread Size | M16 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Screen Filter |
Seal Material | ACM (Polyacrylate) |
Weight | 0.4742 kg |
Function | Hydraulic Filter Kit, automatic transmission |
Transmission Type | Automatic Transmission |
Additional Information 2 | with bolts/screws, with overflow pipe, with oil sump gasket |
Type | Hydraulic Filter Kit, automatic transmission |
not for SA code | A89 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (24538)
- 1x Febi Gasket, automatic transmission oil sump (30156)
- 1x Febi Hose, transmission oil cooler (40235)
- 1x Febi Screw Plug, oil sump (46332)
- 1x Febi Seal Ring, oil drain plug (04054)
- 6x Febi Bolt, automatic transmission oil tray (46389)
Important compatibility info
Weight | 0.703 kg |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 25 |
Internal Teeth, wheel side | 30 |
Weight | 2.076 kg |
Number of Teeth, ABS ring | 44 |
ABS Ring Diameter | 70 mm |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Placement on Vehicle | Left Front |
Weight | 0.24 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 6 mm |
Function | Seal Set, valve stem |
Outer diameter 1 | 10 mm |
Outer diameter 2 | 23 mm |
Seal Material | FPM (fluoride rubber) |
Height | 16 mm |
Type | Seal Set, valve stem |
Weight | 0.106 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Set, valve stem (28172)
- 4x Febi Spacer Sleeve (28173)
Important compatibility info
Weight | 2.982 kg |
Placement on Vehicle | Front Axle |
Length | 175 mm |
Width | 79.3 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Model | DEFENDER DISCOVERY DISCOVERY SPORT E-PACE EVOQUE SPORT |
Manufacturer | JAGUAR LAND ROVER RANGE ROVER |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Weight | 3.770 kg |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 259 mm |
Thickness | 43.2 mm |
Brake Disc Thickness | 9 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 62 mm |
Surface | Coated |
Number of mounting bores | 3 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Weight | 3.350 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 260 mm |
Thickness | 31 mm |
Brake Disc Thickness | 9 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 64 mm |
Surface | Coated |
Number of mounting bores | 4 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.914 kg |
Material | Cast Aluminium |
Number of Teeth | 20 |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Replaces | 02086 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 5 V |
Material | Plastic |
Weight | 0.03 kg |
Length | 64.7 mm |
Number of Connectors / Ports | 6 |
Type | Sensor, headlight levelling |
Function | Sensor, headlight levelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 83 mm |
Material | Rubber/Metal |
Inner diameter | 12.8 mm |
Weight | 0.818 kg |
Placement on Vehicle | Rear Axle Right, Centre |
Thickness | 124 mm |
Paired article numbers | 184998 |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.280 kg |
Placement on Vehicle | Lower Front Axle, both sides |
Function | Mounting, control/trailing arm |
Material | Rubber/Metal |
Type | Mounting, control/trailing arm |
Additional Information 2 | with ball joint, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21463)
- 1x Febi Mounting, control/trailing arm (21464)
Important compatibility info
Placement on Vehicle | Rear Axle |
Additional Information | with retaining rings |
Outer diameter | 75 mm |
Bolt Hole Circle Diameter | 19 mm |
Weight | 1.900 kg |
Type | Repair Kit, guide strut |
Function | Repair Kit, guide strut |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.477 kg |
Number of mounting bores | 3 |
for OE number | 56 79 352 |
Type | Central Slave Cylinder, clutch |
Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.7 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32100)
- 1x Febi Air Filter (38406)
- 1x Febi Filter, cabin air (27868)
- 4x Febi Spark Plug (13406)
Important compatibility info
Weight | 0.601 kg |
Placement on Vehicle | Rear |
for OE number | 2 214 442 |
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
Extra Description | febi Plus |
Height | 55 mm |
Additional Information | for multi-plate clutch |
Outer diameter | 38 mm |
Additional Information 2 | with bolts/screws, with top |
Weight | 0.078 kg |
Type | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
Clutch ID | Haldex Gen IV |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.01 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 38 mm |
Function | Sensor, wheel speed |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 16 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 1.6 kg |
Placement on Vehicle | Rear |
Colour Coding | Green |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.804 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 71.5 mm. 38 mm |
Inner diameter | 10 mm |
Function | Bush Set, axle beam |
Thickness | 80 mm |
Type | Bush Set, axle beam |
Additional Information 2 | with bolts/screws |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (27290)
- 2x Febi Screw (32613)
- 2x Febi Nut (32615)
Important compatibility info
Additional Information 2 | with clamp |
Placement on Vehicle | Charge Air Cooler |
Turbocharger line | Turbocharger to charge air cooler |
Function | Charge Air Hose |
Type | Charge Air Hose |
Outer diameter 2 | 66 mm |
Weight | 0.591 kg |
Outer diameter 1 | 62 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Inner diameter 2 | 56 mm |
Inner diameter 1 | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 448 mm |
Housing Diameter | 18 mm |
Eject Force | 470 N |
Stroke | 159 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 250.5 mm |
Weight | 0.4 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 85 °C |
Function | Thermostat, coolant |
Weight | 0.05 kg |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 396 mm |
Additional Information 2 | with crown nut |
Outer diameter | 40 mm |
External Thread Size | M16 x 1,5 |
Function | Tie Rod |
Type | Tie Rod |
Weight | 1.196 kg |
Paired article numbers | 182411 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023