Proud to be a UK-based company
Contact us
Important compatibility info
| Seal Material | Paper |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Type | Water Pump, engine cooling |
| Number of Wings | 7 |
| Weight | 0.775 kg |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 92 °C |
| Number of Connectors / Ports | 2 |
| Type | Thermostat, coolant |
| Weight | 0.354 kg |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Length | 1740 mm |
| Outer diameter | 8 mm |
| Weight | 0.15 kg |
| Pressure | 400 bar |
| Function | Hose Line, driver cab tilting device |
| Inner diameter | 4.2 mm |
| External Thread Size | M12 x 1,5 |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 0.526 kg |
| Length | 105 mm |
| Width | 105 mm |
| Function | Dust Cover Kit, shock absorber |
| for OE number | 2N0 412 303 E S1 |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (109548)
- 2x Febi Rubber Buffer, suspension (170031)
£33.50
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 540 mm |
| Weight | 0.2 kg |
| Housing Diameter | 20 mm |
| Eject Force | 555 N |
| Stroke | 180 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 327 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 0.204 kg |
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1600 Ohm |
| Cable Length | 925 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Paired article numbers | 107380 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Function | Slave Cylinder |
| Type | Slave Cylinder |
| Stroke | 48 mm |
| Inner diameter | 8 mm |
| External Thread Size | M8 x 1,25, M12 x 1,5 |
| Weight | 0.222 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 2.406 kg |
| Placement on Vehicle | Front Axle |
| Length | 340 mm |
| Outer diameter | 146 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 2.650 kg |
| Placement on Vehicle | Front Axle |
| Length | 405 mm |
| Function | Suspension Spring |
| Wire Diameter | 12.8 mm |
| Type | Suspension Spring |
| Outer diameter | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Weight | 1.2 kg |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (38631)
- 1x Febi Inner Tie Rod (29513)
£33.50
Important compatibility info
| Outer diameter | 84 mm. 92 mm |
| Weight | 2.4 kg |
| Number of Coils | 5.5 |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Length | 387 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Length | 298 mm |
| Outer diameter | 135 mm |
| Function | Suspension Spring |
| Weight | 3.15 kg |
| Placement on Vehicle | Front Axle |
| Type | Suspension Spring |
| Wire Diameter | 15.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 0.76 kg |
| Function | Gasket Set, external planetary gearbox |
| Type | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Toothed Disc, external planetary gearbox (08005)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Shaft Seal, wheel hub (06643)
- 1x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Gasket, external planetary gearbox (03429)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Seal Ring, wheel hub (05356)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
£33.50
Important compatibility info
| Placement on Vehicle | Right |
| Material | Plastic |
| Paired article numbers | 24872 |
| Colour | Black |
| Function | Exterior Door Handle |
| Weight | 0.440 kg |
| Type | Exterior Door Handle |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Function | Gasket, cylinder head cover |
| Length | 1084 mm |
| Material | ACM (Polyacrylate) |
| Weight | 0.284 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Type | Timing Belt |
| Number of Teeth | 130 |
| Weight | 0.146 kg |
| Function | Timing Belt |
| Width | 23 mm |
| Width of castor bearing surface | 23 mm |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 0.338 kg |
| Placement on Vehicle | both sides |
| Length | 480 mm |
| Housing Diameter | 22 mm |
| Eject Force | 690 N |
| Stroke | 180 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Housing length | 278.5 mm |
| Mounting points diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Type | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 48 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 161 mm |
| Outer diameter | 92 mm |
| External Teeth, Wheel Side | 29 |
| Seal Diameter | 74 mm |
| Internal Teeth, wheel side | 26 |
| Weight | 2.960 kg |
| Function | Joint Kit, drive shaft |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 0.212 kg |
| Placement on Vehicle | Front Axle Left |
| Number of Connectors / Ports | 2 |
| Cable Length | 950 mm |
| Function | Sensor, wheel speed |
| Paired article numbers | 174803 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Length | 261 mm |
| Function | Inner Tie Rod |
| Weight | 0.44 kg |
| External Thread Size | M12 x 1,25, M14 x 1,5 |
| Additional Information | with counter nut |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 1.740 kg |
| Function | Bush, driver cab suspension |
| Type | Bush, driver cab suspension |
| Material | Rubber/Metal |
| Length | 107 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Function | Hose Line, driver cab tilting device |
| Weight | 0.80 kg |
| Inner diameter | 2.03 mm |
| Length | 340 mm |
| Outer diameter | 3.2 mm |
| Type | Hose Line, driver cab tilting device |
| Pressure | 362 bar |
| Internal Thread Size | M12 x 1,5, M12 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Function | Shuttle Valve, clutch control |
| Weight | 0.160 kg |
| Type | Shuttle Valve, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 0.95 kg |
| Steering arm type | for control arm |
| Function | Ball Joint |
| Type | Ball Joint |
| Mounting points diameter | 13.5 mm. 12.5 mm |
| Cone Size | 16 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Outer diameter | 37 mm |
| Weight | 0.987 kg |
| Number of Connectors / Ports | 7 |
| DIN / ISO | 3731 |
| Voltage | 24 V |
| Inner diameter | 19 mm |
| Number of Coils | 46 |
| Working length | 4.5 m |
| Function | Coiled Cable |
| Material | PU (Polyurethane) |
| Type | Coiled Cable |
| Additional Information 2 | with plug |
| Connecting plug material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 2 |
| Weight | 0.233 kg |
| for OE number | 271 051 01 77 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 193248 |
| Weight | 0.5 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 320 mm |
| Number of Connectors / Ports | 2 |
| Weight | 0.112 kg |
| Cable Length | 185 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Seal Diameter | 50 mm |
| Internal Teeth, wheel side | 22 |
| Length | 153 mm |
| Outer diameter | 79.5 mm |
| External Teeth, Wheel Side | 25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Weight | 1.930 kg |
| External Thread Size | M22 x 1,5 |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 44 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Function | Engine Compartment Noise Insulation |
| Weight | 0.655 kg |
| Type | Engine Compartment Noise Insulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 0.300 kg |
| Placement on Vehicle | Right Rear |
| Length | 571 mm |
| Housing Diameter | 18 mm |
| Eject Force | 215 N |
| Stroke | 231 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 311.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Wire Diameter | 14.5 mm |
| Weight | 2.65 kg |
| Placement on Vehicle | Rear Axle |
| Length | 302 mm |
| Outer diameter | 101 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 0.518 kg |
| Placement on Vehicle | both sides |
| Length | 630 mm |
| Housing Diameter | 28 mm |
| Eject Force | 620 N |
| Stroke | 230 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 370 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Material | Cast Steel |
| Additional Information | with rubber mounts |
| Weight | 1.600 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower Front Axle, Left |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 05624 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12088)
- 2x Febi Mounting, control/trailing arm (06170)
£33.50
Important compatibility info
| Weight | 1.99 kg |
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm |
| Width | 68.5 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.5 mm. 20.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.51
Important compatibility info
| Weight | 0.845 kg |
| Type | Repair Kit, brake camshaft |
| Function | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.51
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Additional Information 2 | without ball bearing |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Weight | 1.019 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.51
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Weight | 1.9 kg |
| Type | Joint Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 147 mm |
| Outer diameter | 85 mm |
| External Teeth, Wheel Side | 25 |
| Seal Diameter | 51 mm |
| Internal Teeth, wheel side | 24 |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.51
Important compatibility info
| Weight | 3.384 kg |
| Placement on Vehicle | Front Axle |
| Length | 139.4 mm |
| Width | 92.3 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.7 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.52
Important compatibility info
| Weight | 2.173 kg |
| Placement on Vehicle | Front Axle |
| Length | 155.3 mm |
| Width | 68.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.8 mm |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.52
Important compatibility info
| Function | Mounting, automatic transmission |
| Replaces | 46607 |
| Weight | 0.596 kg |
| Placement on Vehicle | Centre, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.52
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Width | 76 mm |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Rear Axle |
| Length | 187.4 mm |
| Thickness/Strength 1 | 17 mm |
| Type | Brake Pad Set, disc brake |
| Weight | 2.322 kg |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.53
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 3.962 kg |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 284 mm |
| Thickness | 24.6 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.53
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 4.250 kg |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 40.2 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.53
Important compatibility info
| Centering Diameter | 64.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 114.3 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Thickness | 49.2 mm |
| Outer diameter | 260 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Weight | 3.82 kg |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.53
Important compatibility info
| Weight | 4.15 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 253 mm |
| Thickness | 49 mm |
| Minimum thickness | 15 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Function | Brake Disc |
| Brake Disc Thickness | 17 mm |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.53
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Outer diameter | 85 mm |
| Weight | 2.7 kg |
| Function | Repair Kit, control/trailing arm |
| Mounting points diameter | 23 mm |
| Steering arm type | for triangular control arm (CV) |
| Hole Spacing | 152 mm |
| Type | Repair Kit, control/trailing arm |
| Additional Information 2 | with retaining ring, with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.54
Important compatibility info
| Weight | 4.350 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 256 mm |
| Thickness | 37 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Externally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.55
Important compatibility info
| Additional Information 2 | with quick couplers |
| Turbocharger line | Piping to charge air cooler |
| Placement on Vehicle | Charge Air Cooler, Left |
| Material | ACM (Polyacrylate) |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Weight | 0.43 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.55
Important compatibility info
| Weight | 0.400 kg |
| Type | Cylinder Liner, air compressor |
| Function | Cylinder Liner, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.56
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023