Important compatibility info
Weight | 0.83 kg |
Additional Information | with gasket/seal |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Metal |
Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.371 kg |
Engine Management | Timing Chain |
Type | Sprocket, crankshaft |
Function | Sprocket, crankshaft |
Number of Teeth | 21. 20 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 156 mm |
Number of Coils | 5.6 |
Weight | 2.3 kg |
Function | Suspension Spring |
Placement on Vehicle | Rear Axle |
Length | 346 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Diameter | 50 mm |
Internal Teeth, wheel side | 22 |
Length | 153 mm |
Outer diameter | 79.5 mm |
External Teeth, Wheel Side | 25 |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Weight | 1.930 kg |
External Thread Size | M22 x 1,5 |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Number of Teeth, ABS ring | 44 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 162.7 mm |
Thickness/Strength 1 | 19.5 mm |
Function | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Front Axle |
Width | 63.8 mm |
Weight | 2.280 kg |
Brake System | TRW |
Wear Warning Contact | incl. wear warning contact |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179026 |
Weight | 2.896 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamps, with steering bellow |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (36669)
- 1x Febi Tie Rod End (37860)
- 1x Febi Clamping Clip (38763)
- 1x Febi Clamping Clip (38756)
- 1x Febi Bellow, steering (36653)
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179025 |
Weight | 2.896 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Length | 122 mm |
Outer diameter | 70 mm. 34 mm |
Thickness | 80 mm |
Inner diameter | 24 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Weight | 0.847 kg |
Extra Description | ProKit |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (28488)
- 2x Febi Mounting and Bolting Kit, control/trailing arm (34581)
- 1x Febi Camber Correction Screw (21560)
Important compatibility info
Number of Teeth | 36 |
Engine Management | Timing Chain |
Function | Gear/Sprocket, camshaft |
Type | Gear/Sprocket, camshaft |
Weight | 0.433 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear |
Operating Mode | Electric |
Paired article numbers | 193248 |
Weight | 0.5 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Rear Axle |
Length | 320 mm |
Number of Connectors / Ports | 2 |
Weight | 0.112 kg |
Cable Length | 185 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Slave Cylinder |
Type | Slave Cylinder |
Stroke | 48 mm |
Inner diameter | 8 mm |
External Thread Size | M8 x 1,25, M12 x 1,5 |
Weight | 0.222 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Material | Plastic |
Paired article numbers | 24872 |
Colour | Black |
Function | Exterior Door Handle |
Weight | 0.440 kg |
Type | Exterior Door Handle |
Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Rear |
Operating Mode | Electric |
Paired article numbers | 193198 |
Weight | 0.5 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
External Thread Size | M20 x 1,5 |
Type | Angled Ball Joint, steering push rod |
Cone Size | 26 mm |
Weight | 1.4 kg |
Extra Description | ProKit |
Function | Angled Ball Joint, steering push rod |
Placement on Vehicle | Front Axle |
Length | 115 mm |
Internal Thread Size | M24 x 1,5 |
Width | 35 mm |
Thickness | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178141 |
Weight | 2.4 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 84 mm. 92 mm |
Weight | 2.4 kg |
Number of Coils | 5.5 |
Type | Suspension Spring |
Function | Suspension Spring |
Length | 387 mm |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 92 °C |
Number of Connectors / Ports | 2 |
Type | Thermostat, coolant |
Weight | 0.354 kg |
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cylinder Head Bolt Set |
Weight | 1.0 kg |
Type | Cylinder Head Bolt Set |
Number of screws | 14 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178140 |
Weight | 2.4 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.300 kg |
Placement on Vehicle | Right Rear |
Length | 571 mm |
Housing Diameter | 18 mm |
Eject Force | 215 N |
Stroke | 231 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 311.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Additional Information 2 | with quick couplers |
Weight | 0.125 kg |
Function | Valve, crankcase ventilation |
Extra Description | febi Plus |
Type | Valve, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Engine Compartment Noise Insulation |
Weight | 0.655 kg |
Type | Engine Compartment Noise Insulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hose Line, driver cab tilting device |
Weight | 0.80 kg |
Inner diameter | 2.03 mm |
Length | 340 mm |
Outer diameter | 3.2 mm |
Type | Hose Line, driver cab tilting device |
Pressure | 362 bar |
Internal Thread Size | M12 x 1,5, M12 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Timing Belt |
Number of Teeth | 130 |
Weight | 0.146 kg |
Function | Timing Belt |
Width | 23 mm |
Width of castor bearing surface | 23 mm |
Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M33x1,5 |
Internal Teeth, wheel side | 27 |
External Teeth, Wheel Side | 35 |
Weight | 3.666 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.740 kg |
Function | Bush, driver cab suspension |
Type | Bush, driver cab suspension |
Material | Rubber/Metal |
Length | 107 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.034 kg |
Seal Material | Rubber |
Function | Gasket, oil sump |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shuttle Valve, clutch control |
Weight | 0.160 kg |
Type | Shuttle Valve, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Door Handle, interior equipment |
Colour | Black |
Paired article numbers | 184615 |
Placement on Vehicle | Right |
Extra Description | febi Plus |
Weight | 0.11 kg |
Type | Door Handle, interior equipment |
Additional Information | without cladding |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.518 kg |
Placement on Vehicle | both sides |
Length | 630 mm |
Housing Diameter | 28 mm |
Eject Force | 620 N |
Stroke | 230 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 370 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Paper |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Type | Water Pump, engine cooling |
Number of Wings | 7 |
Weight | 0.775 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.49 kg |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | both sides |
Function | Mounting, manual transmission |
Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M24 x 1,5 |
Weight | 1.9 kg |
Type | Joint Kit, drive shaft |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 147 mm |
Outer diameter | 85 mm |
External Teeth, Wheel Side | 25 |
Seal Diameter | 51 mm |
Internal Teeth, wheel side | 24 |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.845 kg |
Type | Repair Kit, brake camshaft |
Function | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.99 kg |
Placement on Vehicle | Front Axle |
Length | 156.4 mm |
Width | 68.5 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.5 mm. 20.3 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.384 kg |
Placement on Vehicle | Front Axle |
Length | 139.4 mm |
Width | 92.3 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.7 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, automatic transmission |
Replaces | 46607 |
Weight | 0.596 kg |
Placement on Vehicle | Centre, Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.173 kg |
Placement on Vehicle | Front Axle |
Length | 155.3 mm |
Width | 68.5 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.8 mm |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 3.962 kg |
Rotor Style | Solid |
Placement on Vehicle | Rear Axle |
Outer diameter | 284 mm |
Thickness | 24.6 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8.4 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 76 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 4.250 kg |
Rotor Style | Solid |
Placement on Vehicle | Rear Axle |
Outer diameter | 280 mm |
Thickness | 40.2 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 72 mm |
Surface | Coated |
Number of mounting bores | 3 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Additional Information | with rubber mounts |
Weight | 1.600 kg |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Lower Front Axle, Left |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 05624 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12088)
- 2x Febi Mounting, control/trailing arm (06170)
Important compatibility info
Function | Brake Pad Set, disc brake |
Width | 76 mm |
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Rear Axle |
Length | 187.4 mm |
Thickness/Strength 1 | 17 mm |
Type | Brake Pad Set, disc brake |
Weight | 2.322 kg |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.15 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 253 mm |
Thickness | 49 mm |
Minimum thickness | 15 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 60 mm |
Surface | Coated |
Function | Brake Disc |
Brake Disc Thickness | 17 mm |
Rim Hole Number | 4 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Centering Diameter | 64.1 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Bolt Hole Circle Diameter | 114.3 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Thickness | 49.2 mm |
Outer diameter | 260 mm |
Placement on Vehicle | Rear Axle |
Type | Brake Disc Rotor |
Rim Hole Number | 5 -Hole |
Weight | 3.82 kg |
Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Rubber/Metal |
Outer diameter | 85 mm |
Weight | 2.7 kg |
Function | Repair Kit, control/trailing arm |
Mounting points diameter | 23 mm |
Steering arm type | for triangular control arm (CV) |
Hole Spacing | 152 mm |
Type | Repair Kit, control/trailing arm |
Additional Information 2 | with retaining ring, with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 261 mm |
Function | Inner Tie Rod |
Weight | 0.44 kg |
External Thread Size | M12 x 1,25, M14 x 1,5 |
Additional Information | with counter nut |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Number of Connectors / Ports | 2 |
Length | 715 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.040 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with quick couplers |
Turbocharger line | Piping to charge air cooler |
Placement on Vehicle | Charge Air Cooler, Left |
Material | ACM (Polyacrylate) |
Function | Charge Air Hose |
Type | Charge Air Hose |
Weight | 0.43 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023