Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 887 mm |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.041 kg |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.30
Important compatibility info
| Placement on Vehicle | engine sided |
| Weight | 0.231 kg |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.30
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 72.8 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.3 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
| Length | 155.2 mm |
| Weight | 2.1 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.30
Important compatibility info
| Cone Size | 27 mm |
| Width | 66 mm |
| Thickness | 120 mm |
| Length | 103 mm |
| Placement on Vehicle | Front Axle |
| Weight | 1.407 kg |
| Internal Thread Size | M22 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Angled Ball Joint / Tie Rod End |
| Function | Angled Ball Joint / Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.31
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Weight | 1.9 kg |
| Replaces | 22726; 22728 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.31
Important compatibility info
| Weight | 1.220 kg |
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.31
Important compatibility info
| Weight | 0.236 kg |
| Force output F | 55 N. 900 N |
| Function | Vibration Damper, v-ribbed belt |
| Type | Vibration Damper, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.32
Important compatibility info
| for OE number | 51.54114.6086 SK3 |
| Weight | 0.13 kg |
| Type | Sealing Set, air compressor |
| Function | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.32
Important compatibility info
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 2.066 kg |
| Paired article numbers | 180912 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.32
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42 mm |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Right |
| Type | Brake Caliper |
| Paired article numbers | 180911 |
| Weight | 2.066 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.32
Important compatibility info
| Voltage | 11 V |
| Spanner Size | 10 |
| Function | Glow Plug |
| Replaces | 18409 |
| External Thread Size | M10 x 1 |
| Type | Glow Plug |
| Glow Plug Type | after-glow capable |
| Fitting Depth | 27 mm |
| Weight | 0.033 kg |
| Length | 130.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.33
Important compatibility info
| Number of Coils | 4.6 |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Outer diameter | 145 mm |
| Length | 322 mm |
| Weight | 1.5 kg |
| Placement on Vehicle | Front Axle |
| Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.33
Important compatibility info
| Weight | 0.326 kg |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.34
Important compatibility info
| Function | Tappet |
| Type | Tappet |
| Outer diameter | 28 mm |
| Material | Steel |
| Placement on Vehicle | Intake Side |
| Operating Mode | Mechanical |
| Thickness | 70 mm |
| Weight | 0.159 kg |
| Inner diameter | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.34
Important compatibility info
| Weight | 1.568 kg |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
| for OE number | 037 121 010 C |
| Hub external diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.34
Important compatibility info
| Cable Length | 800 mm |
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 109547 |
| Weight | 0.116 kg |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.34
Important compatibility info
| Paired article numbers | 109545 |
| Number of Connectors / Ports | 2 |
| Cable Length | 815 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left |
| Weight | 0.116 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.34
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Weight | 0.015 kg |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
| Replaces | 39605 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.35
Important compatibility info
| Function | Actuator, headlight levelling |
| Placement on Vehicle | both sides |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Extra Description | febi Plus |
| Weight | 0.060 kg |
| Type | Actuator, headlight levelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.35
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Length | 415 mm |
| Eject Force | 520 N |
| Stroke | 155 mm |
| Housing Diameter | 22 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 18 mm |
| Housing length | 239.5 mm |
| Weight | 0.17 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.36
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023