Proud to be a UK-based company
Contact us
Important compatibility info
| Colour | White |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 1.04 kg |
| Replaces | 15722 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.81
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 56 |
| Timing Chain Size | G53HR |
| Function | Chain Kit, oil pump drive |
| Weight | 0.297 kg |
| Type | Chain Kit, oil pump drive |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
For precise identification, compare the mounting of the sprocket on the oil pump shaft. During the construction period, the vehicle manufacturer changed the wheel mounting mandrel from flattening on one side to flattening on both sides.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (15839)
- 1x Febi Sprocket/Gear, oil pump (49524)
- 1x Febi Screw (49525)
£33.81
Important compatibility info
| Weight | 0.015 kg |
| Placement on Vehicle | Rear Axle |
| Height | 14 mm |
| Material | NBR (nitrile butadiene rubber), FPM (fluoride rubber) |
| Outer diameter | 100 mm |
| Inner diameter | 65 mm |
| Type | Shaft Seal, differential |
| Function | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.82
Important compatibility info
| Function | Ignition Coil |
| Type | Ignition Coil |
| Weight | 0.204 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.82
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 251 mm |
| Thickness | 40.6 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Weight | 3.41 kg |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.83
Important compatibility info
| Weight | 2.24 kg |
| Placement on Vehicle | Front Axle |
| Length | 335 mm |
| Outer diameter | 174 mm |
| Function | Suspension Spring |
| Wire Diameter | 13 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.83
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Weight | 0.04 kg |
| Inner diameter | 50 mm |
| Outer diameter | 80 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Width | 11 mm |
| Placement on Vehicle | frontal sided |
| Rotation Direction | Clockwise rotation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.83
Important compatibility info
| Weight | 2.31 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40254 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (29637)
- 2x Febi Bolt, control arm (26337)
- 2x Febi Nut (24522)
- 1x Febi Clamping Bolt, ball joint (10637)
- 1x Febi Nut (10638)
£33.83
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 4.76 kg |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 286 mm |
| Thickness | 48.3 mm |
| Brake Disc Thickness | 12 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Brake Disc |
| Minimum thickness | 10 mm |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.84
Important compatibility info
| Weight | 3.267 kg |
| Placement on Vehicle | Front Axle |
| Length | 163.1 mm |
| Width | 90.7 mm. 81 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.85
Important compatibility info
| Paired article numbers | 181040 |
| Weight | 0.580 kg |
| Type | Tie Rod End |
| Additional Information | with lock nut |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Spanner Size | 21 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.85
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1080 mm |
| Type | Connecting Cable, ABS |
| Function | Connecting Cable, ABS |
| Weight | 0.102 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.85
Important compatibility info
| Length | 1170 mm |
| Colour | Blue |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Sensor, wheel speed |
| Weight | 0.06 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.86
Important compatibility info
| Brake System | ATE |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179093 |
| Weight | 2.5 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.86
Important compatibility info
| Weight | 0.14 kg |
| Function | Timing Belt |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 141 |
| Width | 20 mm |
| Type | Timing Belt |
| Surface | PTFE (Polytetrafluorethylene) coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.86
Important compatibility info
| Length | 331 mm |
| Additional Information | with oil drain plug |
| Material | Steel |
| Additional Information 2 | with seal ring |
| Spanner Size | 14 |
| Weight | 1.036 kg |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| External Thread Size | M12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.86
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 44947 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Additional Information 2 | with clamps, with steering bellow |
| Weight | 1.28 kg |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (28607)
- 1x Febi Tie Rod End (36261)
- 1x Febi Bellow Kit, steering (44797)
£33.87
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Spanner Size | 14 |
| Rod/Strut | Coupling Rod |
| Length | 148 mm |
| Weight | 0.351 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Length | 26 mm |
| Material | Steel |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.87
Important compatibility info
| Weight | 0.060 kg |
| Opening Temperature | 95 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.89
Important compatibility info
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 69 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Minimum thickness | 8 mm |
| Brake Disc Thickness | 10 mm |
| Thickness | 38.4 mm |
| Outer diameter | 250 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 3.390 kg |
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.89
Important compatibility info
| Type | Brake Caliper |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178210 |
| Weight | 3.71 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.90
Important compatibility info
| Outer diameter | 84 mm |
| Paired article numbers | 176929 |
| Inner diameter | 18 mm |
| Thickness | 126 mm |
| Weight | 1.427 kg |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle Right |
| Type | Mounting, control/trailing arm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.90
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Paper |
| Material | Cast Aluminium |
| Weight | 0.660 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.90
Important compatibility info
| Inner diameter | 18 mm |
| Paired article numbers | 176928 |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle Left |
| Type | Mounting, control/trailing arm |
| Weight | 1.427 kg |
| Outer diameter | 84 mm |
| Thickness | 126 mm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.90
Important compatibility info
| Material | Rubber/Metal |
| Weight | 1.65 kg |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (18735)
- 1x Febi Rolling Bearing, suspension strut support mount (17163)
£33.90
Important compatibility info
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Steering | with tie rod end |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 438 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Weight | 1.17 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.90
Important compatibility info
| Brake caliper piston diameter | 66 mm |
| Type | Brake Caliper |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178211 |
| Weight | 3.71 kg |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.90
Important compatibility info
| Function | Boost Pressure Control Valve |
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 1 |
| Weight | 0.1 kg |
| Type | Boost Pressure Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.91
Important compatibility info
| Weight | 0.542 kg |
| Placement on Vehicle | Front Axle |
| Length | 138.8 mm |
| Width | 71.8 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.91
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Weight | 3.43 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 262 mm |
| Thickness | 32 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.91
Important compatibility info
| Weight | 2.01 kg |
| Placement on Vehicle | Front Axle |
| Length | 331 mm |
| Outer diameter | 141 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 12.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.92
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178407 |
| Weight | 3.0 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.92
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178406 |
| Weight | 3.0 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.92
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain |
| Number of Chain Links | 64 |
| Weight | 0.164 kg |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.92
Important compatibility info
| Weight | 2.45 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.92
Important compatibility info
| Weight | 0.050 kg |
| Number of Connectors / Ports | 3 |
| for OE number | 82 00 974 421 |
| Type | Sensor, exhaust pressure |
| Function | Sensor, exhaust pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.92
Important compatibility info
| Weight | 0.509 kg |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | without ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (27115)
- 3x Febi Nut (37858)
£33.93
Important compatibility info
| Weight | 0.127 kg |
| Number of Connectors / Ports | 2 |
| Type | Breather Valve, fuel tank |
| Function | Breather Valve, fuel tank |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.93
Important compatibility info
| Weight | 2.4 kg |
| Placement on Vehicle | Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right |
| Length | 150 mm |
| Rod/Strut | Coupling Rod |
| Cone Size | 28.6 mm |
| Pipe Diameter | 27 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.94
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 276 mm |
| Outer diameter | 85 mm. 45 mm |
| Weight | 0.9 kg |
| Type | Bellow, driver cab suspension |
| Function | Bellow, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.94
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 169 mm |
| Width | 59.8 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 1.3 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.95
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.656 kg |
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.95
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 41107 |
| Function | Tie Rod End |
| Weight | 0.910 kg |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Length | 125 mm |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.96
Important compatibility info
| Weight | 1.150 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 65 mm. 48 mm |
| Thickness | 49 mm |
| Inner diameter | 17 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (08562)
- 2x Febi Mounting, control/trailing arm (08563)
- 2x Febi Sleeve, control arm mounting (08564)
- 2x Febi Nut (07757)
- 2x Febi Nut (08565)
- 1x Febi Nut (21055)
- 2x Febi Washer (08567)
£33.97
Important compatibility info
| Weight | 0.530 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Hole Spacing | 110 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.97
Important compatibility info
| Weight | 0.3 kg |
| Inner diameter | 10 mm. 8 mm |
| Function | Vibration Damper, v-ribbed belt |
| Length | 104 mm |
| Type | Vibration Damper, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.97
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Approved |
| Outer diameter | 183 mm |
| Width | 31 mm |
| Weight | 1.04 kg |
| Function | Brake Shoe Set, parking brake |
| Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.97
Important compatibility info
| Additional Information | with axle nut |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
| Width | 37 mm |
| Outer diameter | 72 mm |
| Inner diameter | 39 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Weight | 0.7 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.97
Important compatibility info
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
| for OE number | 6441.S7 |
| Weight | 0.178 kg |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.97
Important compatibility info
| Internal Teeth, wheel side | 34 |
| Length | 170 mm |
| External Thread Size | M24 x 2 |
| External Teeth, Wheel Side | 30 |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 2.78 kg |
| Seal Diameter | 54 mm |
| Outer diameter | 93 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.97
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023