Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.0 kg |
| Inner diameter | 233.5 mm |
| Outer diameter | 446 mm |
| Placement on Vehicle | Rear Axle |
| Height | 66 mm |
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 2.640 kg |
| Placement on Vehicle | Rear Axle |
| Length | 335 mm |
| Outer diameter | 116 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.161 kg |
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | MN195616 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 1.23 kg |
| Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
| Width | 27 mm |
| Outer diameter | 125 mm |
| Inner diameter | 70 mm |
| Bearing Type | Cylindrical Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 328 mm |
| Outer diameter | 134 mm |
| Function | Suspension Spring |
| Wire Diameter | 14 mm |
| Weight | 2.58 kg |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.18 kg |
| Placement on Vehicle | Left, Right |
| Material | Plastic |
| Colour | Black |
| Type | Exterior Door Handle |
| Function | Exterior Door Handle |
| Lock System | with lock barrel, with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Function | Bellow, driver cab suspension |
| Type | Bellow, driver cab suspension |
| Weight | 1.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 302 mm |
| Weight | 1.13 kg |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| Min. Length | 207 mm |
| Pipe Diameter | 44 mm. 54 mm |
| External Thread Size | M12 x 1,75 |
| Operating Mode | Mechanical |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M10 x 1,5 |
| External Teeth, Wheel Side | 40 |
| Internal Teeth, wheel side | 27 |
| Weight | 2.756 kg |
| Number of Teeth, ABS ring | 48 |
| ABS Ring Diameter | 81 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 1.190 kg |
| Function | Release Fork, clutch |
| Type | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 1x Febi Thrust Roller, release fork (35529)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
- 1x Febi Release Fork, clutch (44433)
£34.49
Important compatibility info
| Spanner Size | 19 |
| Number of Connectors / Ports | 2 |
| Cable Length | 400 mm |
| Function | Sensor, coolant temperature |
| Screw length below head | 30 mm |
| External Thread Size | M10 x 1 |
| Weight | 0.061 kg |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 2.510 kg |
| Placement on Vehicle | Rear Axle |
| Length | 334 mm |
| Outer diameter | 132 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Paired article numbers | 180302 |
| Placement on Vehicle | Front, Right |
| Function | Wiper Arm, window cleaning |
| Type | Wiper Arm, window cleaning |
| Weight | 0.440 kg |
| Additional Information 2 | with integrated washer fluid jet |
| Material | Steel |
| Length | 633 mm |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Length | 158 mm |
| Weight | 1.950 kg |
| External Thread Size | M30 x 1,5 |
| Internal Thread Size | M24 x 1,5 |
| Spanner Size | 36 |
| Extra Description | ProKit |
| Thread Type | with right-hand thread |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Length | 298 mm |
| Outer diameter | 135 mm |
| Function | Suspension Spring |
| Weight | 3.15 kg |
| Placement on Vehicle | Front Axle |
| Type | Suspension Spring |
| Wire Diameter | 15.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.060 kg |
| Extra Description | febi Plus |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Cable Length | 157 mm |
| Function | Sensor, engine oil level |
| Type | Sensor, engine oil level |
| Additional Information 2 | with seal ring |
| Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 57 mm |
| Weight | 0.351 kg |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Material | Thermoplastic polyester elastomer |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Length | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180069)
- 1x Febi Molybdenum Grease (02582)
£34.49
Important compatibility info
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Min. Length | 339 mm |
| Weight | 3.580 kg |
| External Thread Size | M12 x 1,25 |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| Max. Length | 518 mm |
| Paired article numbers | 193112 |
| Placement on Vehicle | Front Axle Right |
| Mounting points diameter | 13 mm |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Paired article numbers | 193111 |
| Mounting points diameter | 13 mm |
| Placement on Vehicle | Front Axle Left |
| Piston conrod diameter | 22 mm |
| Max. Length | 518 mm |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Shock Absorber System | Twin-Tube |
| Weight | 3.620 kg |
| Min. Length | 339 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| External Thread Size | M12 x 1,25 |
| Pipe Diameter | 51 mm |
| Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| External Teeth, Wheel Side | 26 |
| Placement on Vehicle | Front Axle Left, Wheel Side |
| Internal Teeth, wheel side | 29 |
| Thread Size | M8,0 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Weight | 1.380 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Function | Oil Separator, crankcase ventilation |
| Colour | Black |
| Material | Plastic |
| Weight | 0.156 kg |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
| for OE number | 11 61 7 526 654 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Function | Dryer, air conditioning |
| Type | Dryer, air conditioning |
| Weight | 0.764 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.54 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 026 129 589 A S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.296 kg |
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.213 kg |
| Operating Mode | Mechanical |
| Spanner Size | 32 |
| Opening Pressure | 6.2 bar |
| Type | Overflow Valve |
| Function | Overflow Valve |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 400 mm |
| Outer diameter | 121 mm |
| Function | Suspension Spring |
| Wire Diameter | 14 mm |
| Weight | 3.23 kg |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 3.14 kg |
| Placement on Vehicle | Rear Axle |
| Length | 261 mm |
| Outer diameter | 128 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.1 kg |
| Colour | Beige |
| Material | Plastic |
| Placement on Vehicle | Interior Door Panel, Left |
| Type | Door Handle, interior equipment |
| Paired article numbers | 184836 |
| Extra Description | febi Plus |
| Function | Door Handle, interior equipment |
| Additional Information | without cladding |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.199 kg |
| Height | 169 mm |
| Outer diameter | 107 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 36 |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Function | Thermostat, coolant |
| Weight | 0.284 kg |
| Additional Information | with gasket/seal |
| Opening Temperature | 92 °C |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.50
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023