Important compatibility info
Weight | 0.544 kg |
Function | Slave Cylinder, clutch |
Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.5 kg |
Outer diameter | 280 mm |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Rated Power | 200 W, 120 W |
Number of Wings | 6 |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Gasket, cylinder head cover |
Function | Gasket, cylinder head cover |
Weight | 0.169 kg |
for OE number | 470 016 00 21 |
Material | AEM (Ethylene Acrylate Rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Number of Connectors / Ports | 2 |
Weight | 0.080 kg |
Paired article numbers | 178005 |
Function | Sensor, wheel speed |
Cable Length | 735 mm |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with axle nut |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Inner diameter | 48 mm |
Outer diameter | 86.5 mm |
Width | 42 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Bearing Type | Angular Ball Bearing |
Weight | 0.928 kg |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (174117)
- 1x Febi Circlip (174295)
Important compatibility info
Width of castor bearing surface | 30 mm |
Weight | 0.210 kg |
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 60 mm |
Material | Plastic |
Mounting points diameter | 10 mm |
Inner diameter | 10 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with top |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.2 kg |
Function | Suspension Spring |
Placement on Vehicle | Front Axle |
Length | 327 mm |
Outer diameter | 166 mm |
Type | Suspension Spring |
Wire Diameter | 13.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Cable Length | 620 mm |
Type | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Weight | 0.04 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow, driver cab suspension |
Type | Bellow, driver cab suspension |
Weight | 1.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.155 kg |
Inner diameter 2 | 32.19 mm |
Inner diameter 1 | 19.08 mm |
Function | Connecting Rod, air compressor |
Type | Connecting Rod, air compressor |
Hole Spacing | 92.46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 298 mm |
Outer diameter | 135 mm |
Function | Suspension Spring |
Weight | 3.15 kg |
Placement on Vehicle | Front Axle |
Type | Suspension Spring |
Wire Diameter | 15.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 26 |
Placement on Vehicle | Front Axle Left, Wheel Side |
Internal Teeth, wheel side | 29 |
Thread Size | M8,0 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Weight | 1.380 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Thread Size | M10 x 1,5 |
External Teeth, Wheel Side | 40 |
Internal Teeth, wheel side | 27 |
Weight | 2.756 kg |
Number of Teeth, ABS ring | 48 |
ABS Ring Diameter | 81 mm |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.0 kg |
Inner diameter | 233.5 mm |
Outer diameter | 446 mm |
Placement on Vehicle | Rear Axle |
Height | 66 mm |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.190 kg |
Function | Release Fork, clutch |
Type | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 1x Febi Thrust Roller, release fork (35529)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
- 1x Febi Release Fork, clutch (44433)
Important compatibility info
Weight | 2.640 kg |
Placement on Vehicle | Rear Axle |
Length | 335 mm |
Outer diameter | 116 mm |
Function | Suspension Spring |
Wire Diameter | 13.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.54 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 026 129 589 A S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Separator, crankcase ventilation |
Colour | Black |
Material | Plastic |
Weight | 0.156 kg |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
for OE number | 11 61 7 526 654 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Paper |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Type | Water Pump, engine cooling |
Number of Wings | 7 |
Weight | 0.775 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 400 mm |
Outer diameter | 121 mm |
Function | Suspension Spring |
Wire Diameter | 14 mm |
Weight | 3.23 kg |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023