Important compatibility info
Length | 280 mm |
Height | 28 mm |
Filter type | Activated Carbon Filter |
Function | Filter Set, cabin air |
Weight | 0.18 kg |
Width | 203 mm |
Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Weight | 0.705 kg |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Height | 44 mm |
Outer diameter | 409 mm |
Inner diameter | 228 mm |
Paired article numbers | 196031 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Material | Plastic |
Function | Exterior Door Handle |
Paired article numbers | 24874 |
Placement on Vehicle | Left |
Type | Exterior Door Handle |
Weight | 0.440 kg |
Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.131 kg |
Function | Repair Kit, clutch slave cylinder |
Type | Repair Kit, clutch slave cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 30 |
Weight | 1.570 kg |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 187.4 mm |
Width | 69.9 mm |
Inspection Tag | ECE R90 Approved |
Weight | 2.228 kg |
Wear Warning Contact | prepared for wear warning indicator |
Thickness/Strength 1 | 16 mm |
Placement on Vehicle | Rear Axle |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1720 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.75 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 32419 |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 2.68 kg |
External Thread Size | M12 x 1,25 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.68 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 32420 |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,25 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Replaces | 42140 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 65 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Weight | 0.66 kg |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Ignition Coil |
Type | Ignition Coil |
Weight | 0.23 kg |
Number of Connectors / Ports | 4 |
for OE number | 30713416 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 189 mm |
Width | 89.6 mm |
Additional Information 2 | with anti-squeak plate |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 |
Weight | 2.960 kg |
Thickness/Strength 1 | 16.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.788 kg |
Placement on Vehicle | Front Axle |
Length | 180.1 mm. 181.4 mm |
Width | 75 mm. 75.2 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18 mm. 17.3 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.30 kg |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, manual transmission |
Type | Mounting, manual transmission |
for OE number | 1813.F0 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.164 kg |
Function | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (184862)
- 2x Febi Protective Cap/Bellow, shock absorber (194275)
Important compatibility info
Weight | 2.51 kg |
Length | 170 mm |
Outer diameter | 85 mm |
Steering arm type | for trailing arm |
Mounting points diameter | 19 mm |
Function | Repair Kit, control/trailing arm |
Type | Repair Kit, control/trailing arm |
Additional Information 2 | with retaining ring |
Hole Spacing | 130 mm |
Replaces | 33139 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.63 kg |
Width | 35 mm |
Outer diameter | 158 mm |
Inner diameter | 30 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bore Diameter | 16 mm |
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Weight | 0.248 kg |
Type | Master Cylinder, clutch |
Replaces | 30216 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Material | Plastic |
Number of Connectors / Ports | 3 |
Function | Sensor, exhaust pressure |
Type | Sensor, exhaust pressure |
for OE number | 55198717 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 5.07 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 256 mm |
Thickness | 36.7 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 19 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 65 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rotor Style | Internally Vented |
Replaces | 22880 |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023