Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.342 kg |
| Width of castor bearing surface | 34 mm |
| Material | Metal |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Outer diameter | 60 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.06 kg |
| Opening Temperature | 79 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Function | Cable Pull, clutch control |
| Type | Cable Pull, clutch control |
| Weight | 0.330 kg |
| Inner Length | 387 mm |
| Outer Length | 590 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.771 kg |
| Material | Cast Aluminium |
| Number of Teeth | 19 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| for OE number | 045 121 011 BX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.092 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1420 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.781 kg |
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Function | Cable Repair Kit, tailgate |
| Cable Length | 300 mm |
| Number of circuits | 9 |
| Extra Description | febi Plus |
| Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Hole Spacing | 38 mm |
| Weight | 0.039 kg |
| Length | 52.3 mm |
| Width | 57 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 102 mm |
| Width | 90 mm |
| Material | Rubber/Metal |
| Outer diameter | 90 mm |
| Thickness | 90 mm |
| Inner diameter | 33 mm |
| Function | Mounting, stabiliser bar |
| Weight | 1.469 kg |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 1.54 kg |
| Placement on Vehicle | Right Front |
| Material | Cast Aluminium, Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.396 kg |
| Width | 28.5 mm |
| Outer diameter | 62 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.066 kg |
| Length | 1290 mm |
| Paired article numbers | 171435 |
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 3.165 kg |
| Outer diameter | 150 mm |
| Inner diameter | 90 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Width | 45 mm |
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing |
| Bearing Code | 33118 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.45
Important compatibility info
| Weight | 1.07 kg |
| Placement on Vehicle | Rear Axle |
| Width | 20 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Shoe Set, parking brake |
| Additional Information | with fastening/mounting material |
| Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.45
Important compatibility info
| Weight | 1.4 kg |
| Outer diameter | 116 mm |
| Thickness | 72 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 98 mm |
| Outer diameter 1 | 59 mm |
| Outer diameter 2 | 42 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.45
Important compatibility info
| Length | 162 mm |
| Bolt Head/Nut Design | Male Torx |
| Quality/ Grade | 10.9 |
| Function | Cylinder Head Bolt Set |
| Screw length below head | 147 mm |
| Weight | 2.13 kg |
| External Thread Size | M12 x 1,5 |
| Number of screws | 14 |
| Type | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 14x Febi Cylinder Head Bolt (01825)
£35.45
Important compatibility info
| Type | Gas Spring, bonnet |
| Length | 659 mm |
| Function | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Weight | 0.2 kg |
| Placement on Vehicle | Right |
| Mounting points diameter | 18 mm |
| Stroke | 182 mm |
| Eject Force | 390 N |
| Housing Diameter | 20 mm |
| Housing length | 364.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.45
Important compatibility info
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 1.64 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.45
Important compatibility info
| Weight | 0.2 kg |
| External Thread Size | M16 x 1,5 |
| Length | 108 mm |
| Width | 66.8 mm |
| Thickness | 25 mm |
| Function | Hand Feed Pump |
| Type | Hand Feed Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.46
Important compatibility info
| Placement on Vehicle | Right |
| Length | 731 mm |
| Weight | 0.2 kg |
| Housing length | 389.5 mm |
| Housing Diameter | 18 mm |
| Eject Force | 210 N |
| Stroke | 311 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.46
Important compatibility info
| Weight | 1.098 kg |
| Type | Fan Wheel, engine cooling |
| Function | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.46
Important compatibility info
| Weight | 0.57 kg |
| Function | Exterior Door Handle |
| Colour | Black |
| Paired article numbers | 29164 |
| Material | Metal |
| Placement on Vehicle | Right |
| Type | Exterior Door Handle |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.46
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 179122 |
| Weight | 0.04 kg |
| Cable Length | 565 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
Important compatibility info
| Material | Plastic |
| Weight | 0.2 kg |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
Important compatibility info
| Weight | 0.05 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1960 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| for OE number | 46814966 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.705 kg |
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
| Height | 44 mm |
| Outer diameter | 409 mm |
| Inner diameter | 228 mm |
| Paired article numbers | 196031 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
Important compatibility info
| Material | Sheet Steel |
| Weight | 1.992 kg |
| Paired article numbers | 183093 |
| Placement on Vehicle | Rear Axle Right, Centre |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Additional Information 2 | with bearing |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left, Centre |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 1.992 kg |
| Paired article numbers | 183092 |
| Steering arm type | Trailing Arm |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
Important compatibility info
| Weight | 0.539 kg |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Right, Centre |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 32105 |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 1.432 kg |
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5, M12 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (184891)
- 1x Febi Inner Tie Rod (184263)
£35.48
Important compatibility info
| Weight | 1.22 kg |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.850 kg |
| Function | Expansion Tank, coolant |
| Material | Plastic |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Additional Information | with coolant level sensor |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sensor, coolant level (37648)
£35.48
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 173596 |
| Number of Connectors / Ports | 2 |
| Weight | 0.045 kg |
| Cable Length | 625 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.066 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 700 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Weight | 0.139 kg |
| Number of Connectors / Ports | 2 |
| Cable Length | 1000 mm |
| Paired article numbers | 107469 |
| Placement on Vehicle | Rear Axle Right |
| Additional Information 2 | with retaining strap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 22 mm |
| Weight | 1.735 kg |
| Additional Information 2 | with crown nut |
| Length | 300 mm |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Cone Size | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 0.94 kg |
| Placement on Vehicle | Front Axle |
| Length | 128 mm |
| Spanner Size | 17 |
| Colour | Grey |
| Cone Size | 14.3 mm |
| Function | Pitman Arm |
| Type | Pitman Arm |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Joint Kit, drive shaft |
| Weight | 2.960 kg |
| Type | Joint Kit, drive shaft |
| Placement on Vehicle | Front Axle, Wheel Side |
| External Thread Size | M26 x 1,5 |
| Internal Teeth, wheel side | 34 |
| Seal Diameter | 68 mm |
| External Teeth, Wheel Side | 30 |
| Length | 148 mm |
| Outer diameter | 94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 30 |
| Weight | 1.570 kg |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.230 kg |
| Material | Plastic |
| Opening Temperature | 89 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Weight | 1.26 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 332 mm |
| Paired article numbers | 44285 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (44283)
- 1x Febi Tie Rod End (44282)
£35.48
Important compatibility info
| Function | Ball Joint |
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 43026 |
| Weight | 1.076 kg |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Combi Switch Function | with indicator function, with light dimmer function |
| Weight | 0.28 kg |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.016 kg |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Seal Diameter | 50 mm |
| Internal Teeth, wheel side | 23 |
| Weight | 2.170 kg |
| Number of Teeth, ABS ring | 44 |
| External Thread Size | M22 x 1,5 |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 25 |
| Outer diameter | 87 mm |
| Length | 158 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Type | Roller Guide, sliding door |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Paired article numbers | 178442 |
| Placement on Vehicle | Centre, Right |
| Weight | 0.7 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Cable Length | 200 mm |
| Number of circuits | 11 |
| Function | Cable Repair Set, door |
| Extra Description | febi Plus |
| Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.35 kg |
| Material | Plastic |
| Outer diameter | 102 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Bore Diameter | 30 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.620 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 606 mm |
| Min. Length | 370 mm |
| Pipe Diameter | 48 mm. 38 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Wire Diameter | 14 mm |
| Weight | 2.53 kg |
| Placement on Vehicle | Front Axle |
| Length | 351 mm |
| Outer diameter | 160 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023