Important compatibility info
Function | Tie Rod End |
Placement on Vehicle | Front Axle Left |
Weight | 0.8 kg |
Paired article numbers | 41323 |
Spanner Size | 22 |
Length | 171 mm |
Thickness | 92 mm |
Extra Description | ProKit |
External Thread Size | M22 x 1,5, M14 x 1,5 |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M26 x 1,5 |
External Thread Size | M20 x 1,5 |
Additional Information | with crown nut and split pin |
Placement on Vehicle | Front Axle |
Length | 90 mm |
Cone Size | 28.6 mm |
Extra Description | ProKit |
Weight | 1.59 kg |
Type | Angled Ball Joint / Tie Rod End |
Function | Angled Ball Joint / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.914 kg |
Material | Cast Aluminium |
Number of Teeth | 20 |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Replaces | 02086 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 1.432 kg |
Type | Tie Rod |
Function | Tie Rod |
External Thread Size | M16 x 1,5, M12 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (184891)
- 1x Febi Inner Tie Rod (184263)
Important compatibility info
Weight | 0.850 kg |
Function | Expansion Tank, coolant |
Material | Plastic |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information | with coolant level sensor |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sensor, coolant level (37648)
Important compatibility info
Type | Roller Guide, sliding door |
Function | Roller Guide, sliding door |
Extra Description | febi Plus |
Paired article numbers | 178442 |
Placement on Vehicle | Centre, Right |
Weight | 0.7 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.539 kg |
Steering arm type | Control Arm |
Placement on Vehicle | Rear Axle Right, Centre |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 32105 |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.85 kg |
Function | Water Pump, engine cooling |
Number of Wings | 6 |
Material | Cast Aluminium |
Seal Material | Rubber |
Water pump impeller material | Metal |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, both sides |
Cable Length | 200 mm |
Number of circuits | 11 |
Function | Cable Repair Set, door |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 362 mm |
Outer diameter | 157 mm |
Weight | 2.2 kg |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 12.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Ignition Coil |
Type | Ignition Coil |
Weight | 0.23 kg |
Number of Connectors / Ports | 4 |
for OE number | 30713416 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.255 kg |
Additional Information | with gasket/seal, with temperature sensor |
Opening Temperature | 80 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Weight | 2.960 kg |
Type | Joint Kit, drive shaft |
Placement on Vehicle | Front Axle, Wheel Side |
External Thread Size | M26 x 1,5 |
Internal Teeth, wheel side | 34 |
Seal Diameter | 68 mm |
External Teeth, Wheel Side | 30 |
Length | 148 mm |
Outer diameter | 94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 30 |
Weight | 1.570 kg |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
External Teeth, Wheel Side | 35 |
Internal Teeth, wheel side | 29 |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Thread Size | M33x1,5 |
Type | Joint Kit, drive shaft |
Weight | 4.042 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Material | Steel |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.23 kg |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Ball Joint |
Placement on Vehicle | Front Axle Right, Lower |
Paired article numbers | 43026 |
Weight | 1.076 kg |
External Thread Size | M14 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.016 kg |
Function | Sensor, camshaft position |
Type | Sensor, camshaft position |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Diameter | 50 mm |
Internal Teeth, wheel side | 23 |
Weight | 2.170 kg |
Number of Teeth, ABS ring | 44 |
External Thread Size | M22 x 1,5 |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 25 |
Outer diameter | 87 mm |
Length | 158 mm |
Placement on Vehicle | Wheel Side, Front Axle |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 40.5 mm |
Outer diameter | 102 mm |
Inner diameter | 61 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Weight | 1.92 kg |
Replaces | 34823 |
Type | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Axle Bolt, drive shaft (26511)
- 1x Febi Screw (31324)
- 1x Febi Wheel Bearing (30270)
Important compatibility info
Length | 1263 mm |
Outer diameter | 3.24 mm |
Inner diameter | 2 mm |
Weight | 0.14 kg |
External Thread Size | M12 x 1,5, M12 x 1 |
Function | Hose Line, driver cab tilting device |
Type | Hose Line, driver cab tilting device |
Pressure | 362 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.95 kg |
Placement on Vehicle | Front Axle |
Length | 313 mm |
Outer diameter | 170 mm |
Function | Suspension Spring |
Wire Diameter | 12.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.066 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 700 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 614 mm |
Weight | 0.2 kg |
Housing Diameter | 21 mm |
Housing length | 389 mm |
Type | Gas Spring, boot/cargo area |
Stroke | 193 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Eject Force | 560 N |
Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.6 kg |
Placement on Vehicle | Front Axle |
Length | 362 mm |
Outer diameter | 140 mm |
Function | Suspension Spring |
Wire Diameter | 12.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hose Line, driver cab tilting device |
Length | 1460 mm |
Outer diameter | 8 mm |
Inner diameter | 4 mm |
Pressure | 400 bar |
Weight | 0.15 kg |
External Thread Size | M14 x 1,5 |
Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.090 kg |
Hose Length | 300 mm |
Height | 50 mm |
Width | 70 mm |
Inner diameter 1 | 18 mm |
Inner diameter 2 | 23.5 mm |
Type | Hose, crankcase ventilation |
Function | Hose, crankcase ventilation |
Extra Description | febi Plus |
for OE number | 11 15 7 522 931 |
Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Weight | 0.94 kg |
Placement on Vehicle | Front Axle |
Length | 128 mm |
Spanner Size | 17 |
Colour | Grey |
Cone Size | 14.3 mm |
Function | Pitman Arm |
Type | Pitman Arm |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.300 kg |
Function | Pressure Limiting Valve |
Type | Pressure Limiting Valve |
Mounting points diameter | 34 mm |
Number of Connectors / Ports | 3 |
Length | 73 mm |
Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5, M14 x 1,5 |
Weight | 1.26 kg |
Placement on Vehicle | Front Axle Right |
Length | 332 mm |
Paired article numbers | 44285 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (44283)
- 1x Febi Tie Rod End (44282)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023