Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 35 |
| Internal Teeth, wheel side | 29 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Thread Size | M33x1,5 |
| Type | Joint Kit, drive shaft |
| Weight | 4.042 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.90
Important compatibility info
| Weight | 4.043 kg |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
| Cone Size | 17 mm |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 34760 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.91
Important compatibility info
| Filter type | Screen Filter |
| Weight | 0.236 kg |
| Length | 162 mm |
| Height | 64 mm |
| Width | 126 mm |
| Function | Hydraulic Filter, automatic transmission |
| Type | Hydraulic Filter, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.91
Important compatibility info
| Inner diameter | 8 mm |
| Outer diameter | 67 mm |
| Material | Plastic |
| Width | 25 mm |
| Weight | 0.325 kg |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.92
Important compatibility info
| for OE number | 3093100 |
| Function | Repair Kit, clutch slave cylinder |
| Weight | 0.134 kg |
| Type | Repair Kit, clutch slave cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.93
Important compatibility info
| Weight | 0.902 kg |
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 06 84 220 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.94
Important compatibility info
| Weight | 0.326 kg |
| Width of castor bearing surface | 25 mm |
| Material | Metal |
| Outer diameter | 65 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.94
Important compatibility info
| Placement on Vehicle | Charge Air Cooler, Upper |
| Additional Information 2 | with clamps |
| Weight | 0.18 kg |
| Function | Charge Air Hose |
| Inner diameter | 56 mm |
| Outer diameter | 63 mm |
| Turbocharger line | Piping to charge air cooler |
| Colour | Red |
| Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.94
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Additional Information | with grease |
| Additional Information 2 | with screw |
| Thread Size | M10 x 1,5 |
| External Teeth, Wheel Side | 36 |
| Internal Teeth, wheel side | 26 |
| Weight | 2.088 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.94
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Length | 138 mm |
| Surface | Phosphatized |
| Thread Length | 109 mm |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 11.9 |
| Shaft Length | 14 mm |
| Type | Centering Bolt, crankshaft pulley |
| Function | Centering Bolt, crankshaft pulley |
| Weight | 0.410 kg |
| Bolt / Nut Version | with lockwasher |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.94
Important compatibility info
| Filter type | Spin-on Filter, with water drain screw |
| Function | Fuel filter |
| Weight | 0.321 kg |
| Internal Thread Size | 3/8" - 16 UNF |
| Height | 196 mm |
| Outer diameter | 85 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.95
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 0.050 kg |
| Function | Sensor, camshaft position |
| Length | 24 mm |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.96
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 0.720 kg |
| for OE number | 2N0 412 303 J S1 |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (187820)
- 2x Febi Protective Cap/Bellow, shock absorber (109548)
£36.96
Important compatibility info
| Weight | 0.62 kg |
| Placement on Vehicle | Upper, Rear |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.96
Important compatibility info
| Material | Metal |
| Thickness | 1 mm |
| Function | Gasket, cylinder head |
| Number of Holes | 1 |
| Weight | 0.28 kg |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.96
Important compatibility info
| Weight | 0.25 kg |
| Function | Gas Spring, bonnet |
| Housing length | 432 mm |
| Placement on Vehicle | Right |
| Length | 811 mm |
| Housing Diameter | 26 mm |
| Eject Force | 390 N |
| Stroke | 176 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.97
Important compatibility info
| Function | Brake Caliper |
| Brake caliper piston diameter | 35 mm |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181149 |
| Weight | 1.282 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.97
Important compatibility info
| Outer diameter 1 | 61 mm |
| Outer diameter 2 | 94 mm |
| Bearing Type | Needle Bearing |
| Type | Bush, steering knuckle |
| Weight | 0.864 kg |
| Function | Bush, steering knuckle |
| Inner diameter | 52 mm |
| Thickness | 77 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.97
Important compatibility info
| Function | Glow Plug |
| Type | Glow Plug |
| Glow Plug Type | after-glow capable |
| Weight | 0.030 kg |
| Fitting Depth | 32.4 mm |
| External Thread Size | M10 x 1 |
| Voltage | 10.5 V |
| Spanner Size | 10 |
| Length | 106.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.97
Important compatibility info
| Paired article numbers | 181148 |
| Brake caliper piston diameter | 35 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 1.282 kg |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.97
Important compatibility info
| Weight | 0.7 kg |
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32100)
- 1x Febi Air Filter (38407)
- 1x Febi Filter, cabin air (34780)
- 4x Febi Spark Plug (13403)
£36.97
Important compatibility info
| Weight | 0.025 kg |
| Outer diameter | 12.9 mm |
| Thickness | 43.45 mm |
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| Additional Information 2 | with seal ring |
| for OE number | 006 153 47 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.98
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1070 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Weight | 0.056 kg |
| Paired article numbers | 174890 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.98
Important compatibility info
| Weight | 0.734 kg |
| Outer diameter | 65 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Track rollers material | Plastic |
| Housing material | Aluminium |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.98
Important compatibility info
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 15.5 mm |
| Weight | 3.02 kg |
| Outer diameter | 132 mm |
| Length | 300 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.98
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 279 mm |
| Thickness | 55.8 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 4.360 kg |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.99
Important compatibility info
| Weight | 0.660 kg |
| Material | Cast Aluminium |
| Number of Wings | 10 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Additional Information | with gasket/seal |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.00
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| Weight | 0.550 kg |
| for OE number | 21 52 6 785 966 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.00
Important compatibility info
| Outer diameter | 65 mm |
| Width of castor bearing surface | 25 mm |
| Weight | 0.558 kg |
| Function | Belt Tensioner, v-ribbed belt |
| Material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.01
Important compatibility info
| Weight | 0.625 kg |
| Length | 829 mm |
| Housing Diameter | 22 mm |
| Eject Force | 640 N |
| Stroke | 283 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 473 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.01
Important compatibility info
| Material | Metal |
| Outer diameter | 65 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 1.04 kg |
| Width of castor bearing surface | 32 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.01
Important compatibility info
| Cable Length | 420 mm |
| Number of circuits | 28 |
| Function | Cable Repair Set, door |
| Placement on Vehicle | Front and Rear, both sides |
| Weight | 0.152 kg |
| Extra Description | febi Plus |
| Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.02
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 1150 mm |
| Function | Sensor, wheel speed |
| Weight | 0.054 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.02
Important compatibility info
| Weight | 0.135 kg |
| Length | 80 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | Stop Light Switch |
| Switch point to | 10 bar |
| External Thread Size | M16 x 1,5 |
| Type | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.03
Important compatibility info
| Placement on Vehicle | Front Axle, steered trailing axle, non-steered trailing axle, non-steered leading axle |
| Weight | 2.420 kg |
| Type | Repair Kit, brake caliper |
| Function | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.03
Important compatibility info
| for OE number | 31 33 6 788 776 S2 |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Weight | 0.93 kg |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3x Febi Nut (173448)
- 1x Febi Nut (34653)
- 1x Febi Repair Kit, suspension strut support mount (102403)
£37.03
Important compatibility info
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 30 mm |
| Weight | 0.195 kg |
| Material | Plastic |
| Outer diameter | 53 mm |
| Inner diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.03
Important compatibility info
| Function | Sensor, wheel speed |
| Weight | 0.039 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 520 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.04
Important compatibility info
| Type | Adaptor, electric filament |
| Weight | 0.305 kg |
| Function | Adaptor, electric filament |
| Length | 1200 mm |
| DIN / ISO | ISO 1185 |
| Number of Connectors / Ports | 7 |
| Paired article numbers | 48613 |
| Version | OE Standard |
| Additional Information 2 | with plug |
| Connecting plug material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.04
Important compatibility info
| Weight | 1.25 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 46 mm |
| Outer diameter | 88 mm |
| Inner diameter | 49 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| for OE number | 210 980 05 16 |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Bolt, brake caliper (05792)
- 1x Febi Bolt, brake disc (05560)
- 1x Febi Nut, kingpin (01841)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (08208)
£37.04
Important compatibility info
| Weight | 1.09 kg |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 54 mm |
| Width | 50 mm |
| Outer diameter | 90 mm |
| Additional Information | with axle nut |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.04
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 1055 mm |
| Weight | 0.065 kg |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.05
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Weight | 0.376 kg |
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.05
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 714 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Weight | 0.04 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.05
Important compatibility info
| Weight | 0.275 kg |
| Type | Brake Hose |
| Paired article numbers | 185025 |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Length | 338 mm |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.05
Important compatibility info
| Function | Sensor, boost pressure |
| for OE number | 89421-20210 |
| Type | Sensor, boost pressure |
| Weight | 0.01 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.05
Important compatibility info
| Weight | 0.12 kg |
| Number of Connectors / Ports | 7 |
| Function | Shift Selector Lever |
| Extra Description | febi Plus |
| Type | Shift Selector Lever |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.07
Important compatibility info
| Outer diameter | 171 mm. 118 mm |
| Thickness | 56 mm |
| Inner diameter | 60 mm |
| Weight | 1.645 kg |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.07
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Weight | 1.39 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.07
Important compatibility info
| Weight | 0.384 kg |
| Length | 121 mm |
| Width | 101 mm |
| Material | Aluminium |
| Number of Connectors / Ports | 4 |
| Function | Oil Cooler, engine oil |
| Height | 51 mm |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.08
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023