Important compatibility info
Weight | 5.100 kg |
Placement on Vehicle | both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
External Thread Size | M18 x 1,5 |
for OE number | 960 241 21 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Cone Size | 17.5 mm |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 2 |
Weight | 5.755 kg |
Steering arm type | Semi-Trailing Arm |
Paired article numbers | 186639 |
Additional Information | with rubber mounts, with crown nut and split pin |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 30 mm. 16 mm |
Function | Tilt Cylinder, driver cab |
Pressure side external thread size | M14 x 1,5 |
Length | 648 mm. 960 mm |
Outer diameter | 60 mm |
Number of Connectors / Ports | 2 |
Suction side external thread size | M12 x 1,5 |
Weight | 10.9 kg |
Stroke | 330 mm |
Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cover, driver cab tilt cylinder (40798)
- 1x Febi Cable Tie (07026)
Important compatibility info
Resistance | 1800 Ohm |
Weight | 0.138 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Sensor, wheel speed |
Cable Length | 1330 mm |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Additional Information | with bush |
for OE number | 50 10 143 030 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Catalytic Converter |
Number of Connectors / Ports | 2 |
Weight | 0.047 kg |
Cable Length | 365 mm |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.883 kg |
Placement on Vehicle | Rear |
Number of Connectors / Ports | 4 |
Function | Wiper Motor |
Voltage | 12 V |
Type | Wiper Motor |
for OE number | 5K6 955 711 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1190 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Function | V-Ribbed Belt |
Weight | 0.166 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.035 kg |
Function | Bush, shift rod |
Material | Brass |
Outer diameter | 34 mm |
Thickness | 7.9 mm |
Inner diameter | 22 mm |
Type | Bush, shift rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.004 kg |
Type | Plug |
Function | Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M22 x 1,5 |
Weight | 4.8 kg |
Number of Connectors / Ports | 5 |
Function | Air Suspension Valve |
Type | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals, with oil cooler, with oil filter |
Additional Information 2 | with pressure sensor |
Weight | 1.70 kg |
for OE number | 03N 115 389 N |
Type | Housing, oil filter |
Function | Housing, oil filter |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Weight | 0.6 kg |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Weight | 0.518 kg |
Placement on Vehicle | Front Axle Right |
Material | Steel |
Paired article numbers | 31971 |
Thread Type | with right-hand thread |
DIN / ISO | 985 |
Function | Tie Rod End |
Type | Tie Rod End |
External Thread Size | M10 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Steering arm type | Control Arm |
Paired article numbers | 107846 |
Weight | 3.3 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Cone Size | 18 mm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (107843)
- 1x Febi Ball Joint (36051)
Important compatibility info
Internal Thread Size | M16 |
Function | Holder, Wheel Chock |
Type | Holder, Wheel Chock |
Weight | 0.156 kg |
Material | PA (polyamide) |
Length | 214.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.219 kg |
Placement on Vehicle | Front Axle |
Length | 141.63 mm |
Width | 50.6 mm. 50.8 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.7 mm |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178104 |
Weight | 2.27 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Brake caliper piston diameter | 44 mm |
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (2 pistons) |
Paired article numbers | 179261 |
Weight | 4.567 kg |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Weight | 0.72 kg |
Function | Air Filter |
Height | 360 mm |
Outer diameter | 146 mm |
Inner diameter | 87 mm |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with fastening material |
Weight | 1.018 kg |
Placement on Vehicle | Rear Axle |
Length | 101.9 mm |
Width | 50.2 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.3 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023