Important compatibility info
Placement on Vehicle | Rear Axle Left |
Additional Information | with bush |
Number of Connectors / Ports | 2 |
Resistance | 1250 Ohm |
Cable Length | 1640 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Weight | 0.10 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 173596 |
Number of Connectors / Ports | 2 |
Weight | 0.045 kg |
Cable Length | 625 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.020 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (27136)
- 1x Febi Screw Plug, oil sump (21096)
- 1x Febi Filter, cabin air (17553)
- 1x Febi Air Filter (12765)
- 4x Febi Spark Plug (13462)
Important compatibility info
Weight | 0.055 kg |
Number of Connectors / Ports | 3 |
Function | Knock Sensor |
Type | Knock Sensor |
for OE number | 06A 905 377 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 597 mm |
Weight | 0.2 kg |
Housing Diameter | 25 mm |
Eject Force | 385 N |
Stroke | 224 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 340 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.16 kg |
Operating Mode | Mechanical |
Function | Tensioner Lever, v-ribbed belt |
Type | Tensioner Lever, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 92 °C |
Number of Connectors / Ports | 2 |
Type | Thermostat, coolant |
Weight | 0.354 kg |
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Length | 750 mm |
Weight | 0.04 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Brake caliper piston diameter | 42 mm |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 185992 |
Weight | 2.2 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Paired article numbers | 185991 |
Weight | 2.2 kg |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Function | Brake Caliper |
Brake caliper piston diameter | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 1.570 kg |
Placement on Vehicle | Front Axle |
Inner diameter | 16 mm |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.88 kg |
Placement on Vehicle | Right Front |
Operating Mode | Manual |
Paired article numbers | 104916 |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 447 mm |
Outer diameter | 254 mm |
Function | Air Filter |
Inner diameter | 126 mm |
Filter type | Filter Insert |
Weight | 0.62 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 16.5 mm |
Housing length | 260 mm |
Function | Gas Spring, boot/cargo area |
Piston conrod diameter | 6 mm |
Stroke | 207 mm |
Eject Force | 40 N |
Housing Diameter | 13 mm |
Length | 489 mm |
Placement on Vehicle | Left Rear |
Weight | 0.204 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Function | Gas Spring, bonnet |
Housing length | 432 mm |
Placement on Vehicle | Right |
Length | 811 mm |
Housing Diameter | 26 mm |
Eject Force | 390 N |
Stroke | 176 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 48 mm. 38 mm |
Mounting bores distance | 566 mm |
Min. Length | 345 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Max. Length | 566 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 1.560 kg |
Shock Absorber Type | Gas Pressure |
Bore Diameter | 30 mm |
Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 100 mm |
Placement on Vehicle | Front |
Type | Bush, driver cab suspension |
Length | 121.5 mm |
Material | Rubber/Metal |
Weight | 1.664 kg |
Inner diameter | 25 mm |
Function | Bush, driver cab suspension |
Replaces | 21773 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 60 mm |
Function | Suspension, propshaft |
Weight | 1.72 kg |
Type | Suspension, propshaft |
Additional Information 2 | with rolling bearing |
Bearing Type | Rolling Bearing |
Replaces | 06212 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Diameter | 50 mm |
Internal Teeth, wheel side | 23 |
Weight | 2.170 kg |
Number of Teeth, ABS ring | 44 |
External Thread Size | M22 x 1,5 |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 25 |
Outer diameter | 87 mm |
Length | 158 mm |
Placement on Vehicle | Wheel Side, Front Axle |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
DIN / ISO | 3731 - Typ S |
Working length | 3.5 m |
Number of Connectors / Ports | 7 |
Voltage | 24 V |
Material | PU (Polyurethane) |
Weight | 0.790 kg |
Connecting plug material | Metal |
Function | Coiled Cable |
Type | Coiled Cable |
Additional Information 2 | with plug |
Version | Aftermarket |
Temperature range from | -40 °C |
Temperature range to | 85 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 2.252 kg |
Internal Teeth, wheel side | 24 |
External Teeth, Wheel Side | 29 |
Thread Size | M24x1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.5 kg |
Type | Air Suspension Valve |
Function | Air Suspension Valve |
Internal Thread Size | M27 x 1, M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 3093100 |
Function | Repair Kit, clutch slave cylinder |
Weight | 0.134 kg |
Type | Repair Kit, clutch slave cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Weight | 0.542 kg |
Type | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (179915)
- 2x Febi Protective Cap/Bellow, shock absorber (181758)
Important compatibility info
Internal Thread Size | M6 x 1 |
Function | Door Lock |
Type | Door Lock |
Weight | 0.4 kg |
Paired article numbers | 177319 |
Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M6 x 1 |
Function | Door Lock |
Type | Door Lock |
Weight | 0.4 kg |
Paired article numbers | 177320 |
Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.944 kg |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint, with bearing |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper, Front |
Additional Information | with fastening/mounting material |
External Thread Size | M12 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (179415)
- 2x Febi Screw (21477)
- 2x Febi Washer (40408)
- 2x Febi Nut (34653)
Important compatibility info
Weight | 2.69 kg |
Placement on Vehicle | Rear Axle |
Length | 347 mm |
Outer diameter | 118 mm |
Number of Coils | 7.8 |
Function | Suspension Spring |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Bore Diameter | 30 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 1.620 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 606 mm |
Min. Length | 370 mm |
Pipe Diameter | 48 mm. 38 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Weight | 0.720 kg |
for OE number | 2N0 412 303 J S1 |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (187820)
- 2x Febi Protective Cap/Bellow, shock absorber (109548)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023