Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 2.458 kg |
| External Teeth, Wheel Side | 25 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M24x1,5 |
| Internal Teeth, wheel side | 26 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Cable Length | 570 mm |
| Number of circuits | 8 |
| Function | Cable Repair Set, boot lid |
| Extra Description | febi Plus |
| Type | Cable Repair Set, boot lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 3.950 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 530 mm |
| Min. Length | 353 mm |
| Pipe Diameter | 48.5 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 38255 |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Weight | 2.28 kg |
| Placement on Vehicle | Rear Axle Right |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23953)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (38253)
£37.46
Important compatibility info
| Weight | 2.28 kg |
| Placement on Vehicle | Rear Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 38256 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23952)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (38253)
£37.46
Important compatibility info
| Material | Cast Aluminium |
| Number of Teeth | 24 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 0.67 kg |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 1.032 kg |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 2 |
| Placement on Vehicle | outer, Front Axle Left |
| Length | 188 mm |
| Thickness | 79 mm |
| Paired article numbers | 48112 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Outer diameter | 50 mm |
| Length | 109 mm |
| Function | Repair Kit, kingpin |
| Weight | 1.722 kg |
| Placement on Vehicle | Upper Front Axle, both sides |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (05870)
- 1x Febi Bush, kingpin (05871)
- 1x Febi Seal Ring, steering knuckle (05872)
- 1x Febi Screw Plug, oil sump (05410)
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Spacer, kingpin (05873)
- 1x Febi Circlip (04561)
£37.46
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 2.09 kg |
| Length | 2650 mm |
| Outer diameter | 8.5 mm |
| Inner diameter | 4 mm |
| Pressure | 400 bar |
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Length | 573 mm. 580 mm |
| Width | 27.2 mm. 28.6 mm |
| Thickness | 1.8 mm |
| Number of mounting bores | 11. 12 |
| Function | Gasket Set, oil sump |
| Type | Gasket Set, oil sump |
| Weight | 0.124 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023